Planning Guide

ManualsBrandsDacor ManualsAppliancesDacor - Heritage Pro 30" Externally Vented Range Hood - Stainless steel

All specications subject to change without notice.

Phone: (800) 793-0093www.dacor.com

PLANNING

GUIDE

7.10

RNHP

Renaissance

30”, 36”, 48” Wide

Wall Mount Range Hood

Document # PG07-009

Revised 04/21/2016 Page 1/4

Hood Dimensions

RNHP30 Series

RNHP36 Series

RNHP48 Series

Model A B C D

RNHP3012 29 7/8” (75.9 cm)

24”

(61 cm)

12”

(30.48 cm)

11 7/8” (30.2

cm)

RNHP3612 35 7/8” (91.1 cm)

RNHP4812 47 7/8” (121.6 cm)

RNHP3018 29 7/8” (75.9 cm)

24”

(61 cm)

18”

(45.7 cm)

11 7/8” (30.2

cm)

RNHP3618 35 7/8” (91.1 cm)

RNHP4818 47 7/8” (121.6 cm)

Features Description

Blower Speeds Four (4)

Filters Baffle style, dishwasher safe

Exhaust(s) 8-inch duct diameter

Total Connect

Load

120V, 60 Hz, 9 Amp. Max.

(10.0 Amp max. surge)

Lights

Dimmable LED: PAR16 E26/27

120V, 7.5W (75W Max. other bulbs)

Model

Number

RNHP48 RNHP36 RNHP30

Lights 4 3 2

Filters 4 3 2

Blowers 2 1 1

Exhaust

Vents

2 1 1

Blower

Rating

1200 CFM 600 CFM 600 CFM

Model

Number

Top Vent Rear Vent

Rotatable

Fan

RNHP3012 x x x

RNHP3018 x x x

RNHP3612 x x x

RNHP3618 x x x

RNHP4812 x x x

RNHP4818

x x x

SpecificationsFeatures

Summary of content (4 pages)

PAGE 1
RNHP Revised 04/21/2016 Page 1/4 Document # PG07-009 PLANNING GUIDE Renaissance 30”, 36”, 48” Wide Wall Mount Range Hood ® A D D A C RNHP30 Series C RNHP36 Series RNHP48 Series B B Hood Dimensions Model A RNHP3012 29 7/8” (75.9 cm) RNHP3612 35 7/8” (91.1 cm) RNHP4812 47 7/8” (121.6 cm) RNHP3018 29 7/8” (75.9 cm) RNHP3618 35 7/8” (91.1 cm) RNHP4818 47 7/8” (121.6 cm) B C D 24” (61 cm) 12” (30.48 cm) 11 7/8” (30.2 cm) 24” (61 cm) 18” (45.7 cm) 11 7/8” (30.
PAGE 2
RNHP Revised 04/21/2016 Page 2/4 Document # PG07-009 Renaissance 30”, 36”, 48” Wide Wall Mount Range Hood ® PLANNING GUIDE Vent Exhaust Centerlines Electrical Access Cutout Dimensions Single Exhaust Models Standard 8-inch duct Dual Exhaust Models Standard 8-inch duct Back of hood Electrical access holes 7/8 in dia. (5.1 cm) 5 3/4 in (14.61 cm) CL 1 1/2 in (3.81 cm) B 9 7/8 in (25.1 cm) 3 in (7.62 cm) 19 3/4 in (50.2 cm) B RNHP48 5” (12.7 cm) RNHP36 4 1/2” (11.43 cm) RNHP30 5 1/2” (13.
PAGE 3
RNHP Revised 04/21/2016 Page 3/4 Document # PG07-009 Renaissance 30”, 36”, 48” Wide Wall Mount Range Hood PLANNING GUIDE ® Meeting Installation Requirements WARNING Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. Use only ductwork deemed acceptable by state, municipal and local codes.
PAGE 4
RNHP Revised 04/21/2016 Page 4/4 Document # PG07-009 Renaissance 30”, 36”, 48” Wide Wall Mount Range Hood PLANNING GUIDE ® Planning the Ductwork A WARNING B • To prevent combustion by-products, smoke or odors from entering the home and to improve efficiency, tape all duct joints securely. • Range hoods may interrupt the proper flow of smoke and combustion gases from furnaces, gas water heaters, and fireplaces.