Planning Guide

All specications subject to change without notice.
Phone: [phone]www.dacor.com
PLANNING
GUIDE
FRONT VIEWSIDE VIEW
T
W
X
Finished
stops *
U
V
TOP VIEW
VENTILATION
INSET
3/4” (1.9 cm)
** 1 1/8” (2.9 cm) for models
RNO[V]227B, RNO[V]230B,
RNO227W, RNO230W
1” (2.5 cm) **
Cabinet
face
RNO, RNOV
Document # PG01-016
Revised 11/25/14 Page 3/3
Renaissance 27” and 30” Wide,
Double Wall Oven
CUTOUT DIMENSIONS - FLUSH INSTALLATION
DOUBLE WALL OVEN
Model
(T) Minimum
Cabinet Depth
(U) Cutout
Width
(V) Cutout Height (W) Stop Depth (X) Stop Width
RNO227[F]S 24 3/4” (62.9 cm) 27” (68.6 cm) 49 7/8” (126.7 cm) 3/4” (1.9 cm) 3/8” (1.0 cm)
RNO230[F]S 24 3/4” (62.9 cm) 30” (76.2 cm) 49 7/8” (126.7 cm) 3/4” (1.9 cm) 3/8” (1.0 cm)
RNO[V]227B, RNO227W 24 7/8” (63.2 cm) 27” (68.6 cm) 49 7/8” (126.7 cm) 7/8” (2.2 cm) 3/8” (1.0 cm)
RNO[V]230B, RNO230W 24 7/8” (63.2 cm) 30” (76.2 cm) 49 7/8” (126.7 cm) 7/8” (2.2 cm) 3/8” (1.0 cm)
* Back of wall oven control panel rests against stops
Cabinet tolerances: +1/16” (+1.6 mm) -0,
unless otherwise stated