Installation Instructions

Electrical Connection

Refer to the IVS Installation Instructions.

Installing the IVS

1. Mount the IHL using #8 mounting screws (not

provided). See the diagrams on page 3 to

determine the required quantity and type. Install them

through the top of the liner.

2. Attach the IVS to the IHL mounting studs using the cap

nuts and lock washers included with the IHL kit.

Verifying Proper Operation

Refer to the IVS Installation Instructions.

NOTE: If the blower does not operate properly, follow these

troubleshooting steps:

1. Verify that power is being supplied to the integrated

ventilation system.

2. Check the electrical connections to ensure that the

installation has been completed correctly.

3. If the appliance still does not work, contact Dacor

Distinctive Service at (877) 337-3226. Do not attempt

to repair the appliance yourself. Have the model and

serial numbers available when you call.

Dacor is not responsible for the cost of correcting problems

caused by a faulty installation.

IHL

IVS

Custom hood

IHL mounting

screw, number

required varies

with model,

see page 3

Cap nuts (PN 83287) and lock

washers (PN 83340) for mounting IVS

(provided with IHL kit, quantity varies)