Combined Configuration Drop-In Cooktop - Single Warming Drawer PDF

PLANNING
GUIDE
www.Dacor.com
Phone: [phone]
Specications are subject to change without notice.
See installation instructions for additional details.
CI.15
Drop-In Cooktop/
Warming Drawer
COMBINATION INSTALLATIONS
Drop-in cooktop
1 1/2" (38 mm) Typical counter top
120 Vac
Electrical
outlet
9 1/8" (232 mm)*
*11 15/16” (303 mm) for OWD24
36"
(914 mm)
B
A
2
3/4" (19 mm) Min.
Warming drawer
DROP-IN COOKTOP WITH WARMING DRAWER
Models (A) Cabinet Cutout Width
(B) Min.
Cabinet Width**
24”
22 1/2” (572 mm)
22 5/8" (575 mm) for OWD24
24 1/4” (616 mm)
27” 25 1/2” (648 mm) 27 1/4” (692 mm)
30” 28 1/2” (724 mm) 30 1/4” (768 mm)
36” 34 1/2” (876 mm) 36 1/4” (921 mm)
**Spacing may vary for warming drawers with a custom front panel. See
warming drawer installation instructions.
NOTES:
4” (610 mm) minimum interior cabinet depth 1.
(20 1/8" for model OWD24).
3/4” (19 mm) support platform (flush with cutout).2.
See individual appliance planning guide pages for 3.
overlay dimensions.
Spacing shown is the bare minimum required for 4.
ventilation and to prevent scraping of doors and
drawers. Additional spacing may be required for
appearance.
Model OWD24 is not approved for installation adjacent to 5.
a wall oven.
All tolerances: +1/16”, -0, (+1.6 mm, -0) unless otherwise stated
WARNING
Observe all governing codes and ordinances during •
planning and installation. Contact your local building
department for further information.
All appliances must be installed in accordance with the •
accompanying installation instructions.
Document # PGCI - 015 Revised 09/28/09 Page 1/1