Combined Configuration Slide-In Cooktop - Single Warming Drawer PDF

PLANNING
GUIDE
www.Dacor.com
Phone: [phone]
Specications are subject to change without notice.
See installation instructions for additional details.
CI.16
Slide-In Cooktop/
Warming Drawer
COMBINATION INSTALLATIONS
A
Slide-in gas cooktop
7 3/4" (197 mm)
1" (25 mm) Min.
3/4" (19 mm) Min.
9 1/8" (232 mm)
120 Vac
electrical
outlet
36"
(914 mm)
B
Warming drawer
DRT/EG COOKTOP WITH WARMING DRAWER
Dacor
Models
(A) Cabinet Cutout
Width
(B) Min.
3
Cabinet Width
24” 22 1/2” (572 mm) 24 1/4” (616 mm)
27” 25 1/2” (648 mm) 27 1/4” (692 mm)
30” 28 1/2” (724 mm) 30 1/4” (768 mm)
36” 34 1/2” (876 mm) 36 1/4” (921 mm)
NOTES:
24” (610 mm) minimum interior cabinet depth 1.
(20 1/8" for model OWD24).
Requires 3/4” (19 mm) support platform (flush with 2.
cutout).
Spacing may vary for warming drawers with a 3.
custom front panel. See warming drawer installation
instructions for further details.
See individual appliance planning guides to determine 4.
overlays.
11 15/16” (303 mm) for OWD24.5.
Spacing shown is the bare minimum required for 6.
ventilation and to prevent scraping of doors and
drawers. Additional spacing may be required for
appearance.
Model OWD24 is not approved for installation adjacent 7.
to a wall oven.
All tolerances: +1/16”, -0, (+1.6 mm, -0) unless otherwise stated
WARNING
Observe all governing codes and ordinances during •
planning and installation. Contact your local building
department for further information.
All appliances must be installed in accordance with the •
accompanying installation instructions.
1,2
3
3
5
Document # PGCI - 013
Revised 09/29/09 Page 1/1