User Guide

E13
Micro Warm
Micro Warm allows you to keep food warm up to 30 minutes.
DIRECT USE
Touch the 1. MICRO WARM pad.
ENTER
TIME
UP TO
30
MINUTES
Enter desired time by touching the number pads. To 2.
enter 30 minutes, touch
3000
.
30.00
TOUCH
START
Touch the 3. START/EASY MINUTE pad.
The Microwave In-A-Drawer
will start. The display will
show
30.00
and count down.
KEEP
WARM
will be
displayed intermittently during the count down.
WITH MANUAL COOKING
Enter desired cooking time and power level.1.
Touch the 2. MICRO WARM pad.
Enter desired warming time up to 30 minutes.3.
Touch the 4. START/EASY MINUTE pad.
The operation will start. When the cooking time is com-
plete, a long tone will sound and Micro Warm will start.
The display will count down.
KEEP
WARM
will be dis-
played intermittently during the count down.
NOTE:
If you attempt to enter more than 30 minutes for Mi-
cro Warm, an error message will appear in the display.
Micro Warm cannot be programmed with Sensor Pop-
corn, Sensor Reheat, Sensor Cook, Defrost or Reheat.
Help
Each setting of Sensor Reheat, Sensor Cook, Sensor
Popcorn, Micro Warm, Reheat and Defrost has a cooking
hint. If you wish to check, touch SET UP/HELP whenever
HELP is lighted in the Interactive Display for these and
other manual operation hints.
More Or Less Time Adjustment
Should you discover that you like any of the Sensor,
Reheat or Defrost settings slightly more done, touch the
POWER LEVEL pad once after touching your selection.
The display will show
MORE
.
For slightly less done, touch the POWER LEVEL pad twice
after touching your selection.
The display will show
less
.
Other Features
Multiple Sequence Cooking
Your Microwave In-A-Drawer
can be programmed for up
to 4 automatic cooking sequences, switching from one
power level setting to another automatically.
Sometimes cooking directions tell you to start on one
power level and then change to a different power level.
Your Microwave In-A-Drawer
can do this automatically.
First enter cooking time. Then touch the 1. POWER
LEVEL pad once for 100% cooking or repeat touching
the POWER LEVEL pad for a lower power level.
Enter second cooking time. Repeat touching the 2.
POWER LEVEL pad for desired level. You can follow
this procedure up to 4 times.
TOUCH
START
Touch 3. START/EASY MINUTE pad.
NOTE:
If the POWER LEVEL pad is touched once,
HIGH
will be displayed.
If 100% is selected as the nal sequence, it is not
necessary to touch the POWER LEVEL pad.
If you wish to know the power level during cooking,
simply touch the POWER LEVEL pad. As long as your
nger is touching the POWER LEVEL pad, the power
level will be displayed.
Micro Warm can be programmed even if 4 cooking
sequences have been set.
Easy Minute
Easy Minute allows you to cook for a minute at 100% by
simply touching the EASY MINUTE pad. You can also ex-
tend cooking time in multiples of 1 minute by repeatedly
touching the EASY MINUTE pad during manual cooking.
NOTE:
To use
Easy Minute
, touch the pad within 3 min-
utes after cooking, closing the door or touching
the
STOP/CLEAR
pad.
Easy Minute cannot be used with Sensor settings,
Reheat or Defrost.
Setup/Help
If the electrical power supply to your Microwave In-A-
Drawer
should be interrupted, the display will intermit-
tently show
ENJOY
YOUR
MICRO-
WAVE
TOUCH
CLEAR
AND
TOUCH
CLOCK
after the power is rein-
stated. If this occurs, the SETUP/HELP option you input
will be erased. Simply touch the STOP/CLEAR pad and
reset.