Installation guide

Verifying the Package Contents
• Use and care manual
• Mounting screws
• Wire rack with mounting hardware (OWD24 only)
Installation Planning
• A qualified technician must complete the installation of this built-
in appliance. Proper installation is the customer's responsibility.
Carefully check the location where the drawer is to be installed.
The drawer should be placed for convenient access. Make
certain that electrical power can be provided in the selected
location. Install the warming drawer in wood cabinets only.
• Plan the installation so that all minimum clearances are met or
exceeded. Dimensions shown provide minimum clearances,
unless otherwise noted. Be certain that proper clearance is
provided for the drawer door when it is in the open position.
• The specified minimum cabinet depth and width must be
provided. The cabinet depth and width must completely enclose
the recessed portion of the drawer.
Cabinet cutout dimensions must be used as indicated. All
contact surfaces between the appliance and the cabinet must
be solid and level. The drawer support platform must be flush
with the bottom edge of the cabinet cutout.
• Make certain that you have everything necessary to ensure a
proper installation before proceeding.
• A custom front panel is required for IWD
series models and optional for OWD24.
• An optional Epicure ®style front panel kit is
available for model OWD24.
A
Drawer Face Dimensions
(IWD/OWD Series)
C
B
\
Chassis
Drawer open
E
5/16"
(8 ram)
Overall Dimensions - IWD/OWD Series
Top View
40" (1016 mm)
Mounting hole,
9 places 3 prong
120 Vac power cord
G
** = OWD24 mounting holes
Chassis Dimensions
(IWD/OWD Series)
Warming
Drawer
Model No.
IWD24
IWD27
IWD30
OWD24
(A) Dimension
Drawer Face
Width
22 5/16" (567 mm)
25 5/16" (643 mm)
28 5/16" (719 mm)
22 112" (571 mm)
(B) Dimension
Chassis Width
22 1/4" (565 mm)
25 1/4" (641 mm)
28 1/4" (718 mm)
22 1/2" (571 mm)
(C) Dimension
Chassis Face
Width
22 3/8" (568 mm)
25 3/8" (645 mm)
28 3/8" (721 mm)
22 112" (571 mm)
(O)
Dimension
Drawer
Face Height
8 15/16"
(227 mm)
11 7/8"
(302 mm)
(E)
Dimension
Chassis
Depth
23 3/8"
(594 mm)
20"
(508 mm)
(F)
Dimension
Drawer
Depth
23 13/16"
(605 mm)
18"
(457 mm)
(G)
Dimension
Chassis
Height
9 1/16"
(230 mm)
11 7/8"
(302 mm)
See following page for chassis dimensions for other models
_mCD_ 3