Installation Instructions Induction Cooktop Models: RNCT304 and RNCT365 Part No. 107240 Rev.
Table of Contents Important Safety Instructions........................................... 1 Important Information About Safety Instructions............... 1 Safety Symbols and Labels.............................................. 1 General Safety Precautions.............................................. 2 Installation Specifications................................................. 3 Product Dimensions.......................................................... 3 Electrical Specifications......................
Important Safety Instructions Important Information About Safety Instructions • The Important Safety Instructions and warnings in this manual are not meant to cover all possible problems and conditions that can occur. Use common sense and caution when installing, maintaining or operating this or any other appliance. • Always contact the Dacor Customer Service Team about problems and conditions that you don’t understand. See Customer Service Information.
Important Safety Instructions General Safety Precautions To reduce the risk of fire, electric shock, serious injury or death when using your appliance, follow basic safety precautions, including the following: WARNING • Read the accompanying use and care manual before operating this appliance. • Keep packaging materials away from children. Plastic sheets and bags can cause suffocation. • If you receive a damaged product, immediately contact your dealer or builder. Do not install or use a damaged appliance.
Installation Specifications Product Dimensions 30” (76.2 cm) 2 19” 1 (48.3 cm) 21” (53.3 cm)2 All tolerances: ±1/16 (±1.6 mm), unless otherwise stated. Glass thickness: 3/16” (4.8 mm) 3 7/8” (9.8 cm) Glass thickness: 3/16” (4.8 mm) 3 7/8” (9.8 cm) 36” (91.4 cm) 2 28” (72.4 cm)1 Model RNCT304 34” (86.4 cm)1 19” (48.3 cm)1 21” (53.3 cm) 2 Model RNCT365 1 2 Chassis depth is 1/2” wider/deeper at base of glass cooking surface assembly. Cooking surface overhangs top of chassis by 3/4” (1.
Installation Specifications warning • IMPORTANT: Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. • To reduce the risk of a fire hazard, cooktop malfunction and/or damage to the appliance, all minimum/ maximum clearances shown in these instructions must be met or exceeded. • Do not attempt to modify or lengthen the conduit provided with the appliance. Do not use and extension cord.
Installation Specifications Cabinet Cutout Dimensions See following page for flush and downdraft vent installation cutouts. All tolerances: +1/16 (+1.6 mm), -0, unless otherwise stated. 13” (33.0 cm) max.3 A Non-combustible surface along back wall recommended Note 1 1 1/2” (3.8 cm) max. countertop thickness Note 2 B 18” (45.7 cm) min.3 Note 4 19 3/4” (50.2 cm) Note 5 Cabinet Clearances Model A B RNCT304 30” (76.2 cm) 28 3/4” (73.0 cm) RNCT365 36” (91.4 cm) 34 3/4” (88.
Installation Specifications Cabinet Cutout Dimensions (cont.) Countertop All tolerances: +1/16 (+1.6 mm), -0, unless otherwise stated. 3/16” (4.8 mm) IMPORTANT: See previous page for minimum clearances to combustibles and overhead cabinets. 11/16” (7.0 mm) Countertop Inset (side view) 19 3/4” (50.2 cm) Width Dimensions A B 21 1/8” (53.7 cm) Model A B RNCT304 30 1/8” (76.5 cm) 28 3/4” (73.0 cm) RNCT365 36 1/8” (91.8 cm) 34 3/4” (88.
Installation Instructions Verify the Package Contents Verify that all the items below have been provided. If any item is missing or damaged, please contact your dealer immediately. Do not install a damaged or incomplete appliance. Make sure that you have everything necessary to ensure proper installation before proceeding. • Foam tape • Hold down brackets (2) • Glass scraper (PN 82499) • Dacor Cooktop Cleaning Creme (PN A300) • Product literature Chassis Installation 3.
Installation Instructions Three Wire Electrical Connection IMPORTANT: No white wire connection is required for this 3-wire appliance. If there is an existing neutral (white) wire in the junction box, you must shield it for compliance with the National Electrical Code. Incoming power Wire nut, 3 places Junction box See diagram on right. 1. Separate the wires coming out of the appliance conduit. 2. Connect the black wire from the appliance conduit to the black (L1) supply wire in the junction box. 3.
Installation Instructions Verifying Proper Operation NOTE: If the cooktop does not operate properly, follow these troubleshooting steps: warning Read the accompanying use and care manual completely before using the cooktop. 1. Remove all items from the cooktop. Remove any tape that may be attached to the cooktop. 2. Clean the cooking surface according to the use and care manual prior to use. 3. Turn on power to the cooktop at the circuit breaker panel or fuse box.
Dacor ● 14425 Clark Avenue, City of Industry, CA 91745 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.
