Installation instructions

18
Installation Instructions
Assembling the Filters
Filters are boxed separately and must be assembled during installation. All knobs and hardware that is needed is included
with the filters.
To ensure the correct orientation, make sure the top of the filter lays face-up.
The face of the filter has:
• plastic peel-away coating
• beveled lip on the inside frame
• screw holes up on the ridge (not down in the trough)
Instructions
1. Remove the plastic coating and confirm that the inside lip is beveled. If this is true, proceed. If not, flip the frame.
2. Align the screw, lock washer, and knob with the filter. Make sure the knob is on the ridge and the screw and lock
washer are in the trough.
3. Twist and secure until tight.
4. Proceed with the Installation Instructions and install the filters after hanging the hood.
Replacement Part Number Replacement Part Description
702579 Baffle Filter Kit (1 pc + hardware)
702580 Baffle Filter Kit (2 pc + hardware)
Parts
1
Filter (baffle style)
2
Knob
3
Screw M8
4
Lock washer #10
2
1
4
3
beveled lip
RNHP Baffle-Style Filter