Use and Care Manual

3
E LIGHTS Recessed, dimmable 7.5W LED lights,
size PAR16 E26/27. The quantity and placement of
lights depends on the model.
F MAIN POWER SWITCH
The main power switch is
located inside the front of the
hood. Remove the filters for
access.
NOTE: When power is turned ON, or when power
is restored after a power failure, the control panel
lights will flash for a few seconds as the control
panel re-boots.
A HOOD CANOPY The hood canopy is the
housing that covers and unites all components and
creates the hood system. The purpose of the hood
ventilation system is to capture heat, smoke, and
odors and move them outside.
B CONTROL PANEL Located underneath the
front of the hood. These buttons control the hood’s
various functions.
C FILTER Prevents grease and grime from
getting into the fan(s). The number of filters
depends on the model.
Parts of the Range Hood
Hood Specifications
Total Connected Load
120V, 60 Hz, 9 Amp. Max. (10 Amp. Max. surge)
Filters
Baffle style, ready-to-assemble, stainless steel, dishwasher safe
Lights
120V, 60 Hz., 7.5W Dimmable LED (Max. 75W for halogen and other bulbs)
Size: PAR16, E26/27 Base
Model Hood Width Hood Height Hood Depth b Hood Depth t Filters Lights
RNHP3012 30 inches 12 inches 24 inches 11 7/8 inches 2 2
RNHP3018 30 inches 18 inches 24 inches 11 7/8 inches 2 2
RNHP3612 36 inches 12 inches 24 inches 11 7/8 inches 3 3
RNHP3618 36 inches 18 inches 24 inches 11 7/8 inches 3 3
RNHP4812 48 inches 12 inches 24 inches 11 7/8 inches 4 4
RNHP4818 48 inches 18 inches 24 inches 11 7/8 inches 4 4
D GREASE CHANNEL A removable part of the
filter system that helps capture grease.
Model shown:
RNHP30
A
B
E
D
C
Width
Depth b
Height
Depth t
OFF
ON
F