Installation Instructions Renaissance ® Integrated Hood Liner Models RNIHL30, RNIHL36, and RNIHL48 Part No. 109394 Rev.
Table of Contents Before You Begin............................................................... 1 Important Safety Instructions........................................... 2 Important Information About Safety Instructions............... 2 General Safety Precautions.............................................. 2 Preparation and Setup....................................................... 3 Planning the Installation.................................................... 3 Product Specifications................
Important Safety Instructions Important Information About Safety Instructions • The Important Safety Instructions and warnings in these instructions are not meant to cover all possible problems and conditions that can occur. Use common sense and caution when installing, maintaining, or operating this or any other appliance. • Always contact the Dacor Customer Service Team about problems and conditions that you do not understand.
Preparation and Setup Planning the Installation The Renaissance® series (RN) Integrated Hood Liner (RNIHL) is made from of non-combustible stainless steel. Its dimensions and design make it an excellent component for any custom hood. These liners fit the Renaissance® Integrated Ventilation Systems (RNIVS) shown in the table below.
Preparation and Setup Product Specifications Tolerance: +1/16”, -0” (+0.32, -0 cm) Renaissance Integrated Hood Liner (Model Series RNIHL) ® RNIHL Hood Liner Width Height Depth Weight RNIHL30 27 in 68.58 cm 2 in 5.08 cm 21 in 53.34 cm 5 lb. 2.3 kg RNIHL36 33 in 83.82 cm 2 in 5.08 cm 21 in 53.34 cm 5.5 lb. 2.5 kg RNIHL48 45 in 114.3 cm 2 in 5.08 cm 21 in 53.34 cm 7 lb 3.
Installation Instructions Installing the RNIHL (Hood Liner) The hood canopy must already be mounted and ready for the ventilation system to be installed. But before the ventilation system is installed, the hood liner is fitted inside. hood canopy Refer to the following images when installing the hood liner. #2 To Install the RNIHL Hood Liner: 1. Position the RNIHL with the half-circle cutouts pointing forward. 2. Mount the RNIHL with mounting screws (not provided) at the corners of the liner.
Installation Instructions Installing the RNIVS (Ventilation System) The hood liner must be secured inside the hood canopy and ready for the ventilation system to be attached. Refer to the image at right while installing the ventilation system. To Install the RNIVS: 1. Feed the electrical wires through the hood liner opening (refer to previous image RNIHL Installation Procedure ). RNIHL RNIVS 2. Push the RNIVS through opening of the RNIHL until it stops. 3.
Installation Instructions Verifying the Correct Setup Refer to the RNIVS Installation Instructions manual and follow the steps in “Verifying the Correct Setup.” NOTE: If the blower or lights do not function correctly, follow these troubleshooting steps: 1. Verify that power is being supplied to the RNIVS. 2. Check that the electrical connections have been wired correctly. 3. If the unit still does not work, contact Dacor Distinctive Service at (800) 793-0093, extension 2822.
fold here NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO 1600 CITY OF INDUSTRY CA POSTAGE WILL BE PAID BY ADDRESSEE DACOR ATTN WARRANTY PROCESSING DEPT PO BOX 90070 CITY OF INDUSTRY CA 91715-9907
Please visit www.dacor.com to activate your warranty online. WARRANTY INFORMATION IMPORTANT: Please rest assured that under no conditions will Dacor sell your name or any of the information on this form for mailing list purposes.
