Installation

3
Preparation and Setup
Planning the Installation
• Read and follow the complete RNIVS Installation
Instructions manual to correctly install your custom
hood ventilation system.
• Follow all electrical requirements specified in the
RNIVS Installation Instructions.
• The Renaissance
®
RNIHL Series Hood Liner has no
electrical parts.
• Plan the installation so that all minimum clearances are
met or exceeded.
• The RNIVS is attached using the lock washers and
bolts provided with the RNIHL liner. Quantity varies
according to the RNIHL liner model.
• The RNIHL liner is designed for vertical exhaust duct
(VED) configurations only.
The Renaissance
®
series (RN) Integrated Hood Liner
(RNIHL) is made from of non-combustible stainless steel.
Its dimensions and design make it an excellent component
for any custom hood.
These liners fit the Renaissance
®
Integrated Ventilation
Systems (RNIVS) shown in the table below.
Compatibility
Liner Model Renaissance
®
RNIVS Model
RNIHL30 RNIVS1 RNIVSR1
RNIHL36 RNIVS1 RNIVSR1
RNIHL48 RNIVS2 RNIVSR2
See the RNIVS Installation Instructions manual for details
and specifications.
For general cooking ventilating use only. Do not use to
exhaust hazardous or explosive materials and vapors.
hood canopy
Renaissance
RNIVS Model#
Weight
RNIVS1 28 lb.
(12.70 kg)
RNIVS2 44 lb. (20 kg)
RNIVSR1 23.35 lb. (10.60 kg)
RNIVSR2 37.4 lb. (17 kg)
Renaissance
RNIHL Model#
Weight
RNIHL30
5 lb. (2.3 kg)
RNIHL36
5.5 lb. (2.5 kg)
RNIHL48
7 lb. (3.18 kg)
Planning a Hood Liner Installation
RNIVS2
RNIHL2 Hood Liner