Installation

5
Installation Instructions
Installing the RNIHL (Hood Liner)
The hood canopy must already be mounted and ready
for the ventilation system to be installed. But before the
ventilation system is installed, the hood liner is fitted
inside.
Refer to the following images when installing the hood
liner.
To Install the RNIHL Hood Liner:
1. Position the RNIHL with the half-circle cutouts
pointing forward.
2. Mount the RNIHL with mounting screws (not
provided) at the corners of the liner. See #2 in the
image at right.
Make sure the RNIHL is securely fastened to the
hood canopy. The RNIHL will hold the weight of the
RNIVS.
hood canopy
cutouts
#2
#2
#2
#2
RNIVS
lock washer
bolt
Installing the RNIHL Hood Liner Inside a
Hood Canopy
cutouts
hood liner
RNIHL
Mounting Hardware