Installation

6
Installing the RNIVS (Ventilation System)
1. Feed the electrical wires through the hood liner
opening (refer to previous image RNIHL Installation
Procedure ).
2. Push the RNIVS through opening of the RNIHL until
it stops.
3. Attach the RNIVS to the RNIHL using all the lock
washers and bolts (see images at right). This
hardware is provided.
4. The installed RNIVS will sit atop the RNIHL. The
assembled parts will look like the image on the right.
Make sure the RNIHL is securely fastened to the
hood canopy. The RNIHL will hold the weight of the
RNIVS.
The hood liner must be secured inside the hood canopy
and ready for the ventilation system to be attached.
Refer to the image at right while installing the ventilation
system.
To Install the RNIVS:
Installation Instructions
RNIHL RNIVS
RNIVS Installed on an RNIHL
lock washers
bolts