Insert Liner Guide

Preparation and Setup

Planning the Installation

• Follow the complete RNIVS Installation Instructions

manual to correctly install your custom hood ventilation

system.

• Follow all electrical requirements specified in the

RNIVS Installation Instructions.

• The RNIHL Series Hood Liner has no electrical parts.

• Plan the installation so that all minimum clearances are

met or exceeded.

• The RNIVS is attached using the lock washers and

bolts provided with the RNIHL liner. Quantity varies

according to the RNIHL liner model.

• The RNIHL liner is designed for vertical exhaust duct

(VED) configurations only.

The Heritage Integrated Hood Liner (RNIHL) is made from

of non-combustible stainless steel. Its dimensions and

design make it an excellent component for any custom

hood.

These liners fit the Heritage Integrated Ventilation Systems

(RNIVS) shown in this table:

Compatibility

Liner Model Model

RNIHL30 RNIVS1 RNIVSR1

RNIHL36 RNIVS1 RNIVSR1

RNIHL48 RNIVS2 RNIVSR2

See the RNIVS Installation Instructions manual for details

and specifications.

For general cooking ventilating use only. Do not use to

exhaust hazardous or explosive materials and vapors.

hood canopy

Model Weight

RNIVS1 28 lb.

(12.70 kg)

RNIVS2 44 lb. (20 kg)

RNIVSR1 23.35 lb. (10.60 kg)

RNIVSR2 37.4 lb. (17 kg)

Model Weight

RNIHL30

5 lb. (2.3 kg)

RNIHL36

5.5 lb. (2.5 kg)

RNIHL48

7 lb. (3.18 kg)

Planning a Hood-Liner Installation

RNIVS2

RNIHL2 Hood Liner