Installation Instructions/User Manual Heritage Integrated Hood Liner RNIHL30, RNIHL36, RNIHL48 Part No. 113922 Rev.
Table of Contents Important Safety Instructions........................................... 1 Important Information About Safety Instructions............... 1 General Safety Precautions.............................................. 1 Preparation and Setup....................................................... 2 Planning the Installation.................................................... 2 Product Specifications....................................................... 3 Installation Instructions...............
Important Safety Instructions Important Information About Safety Instructions • • The Important Safety Instructions and warnings in these instructions are not meant to cover all possible problems and conditions that can occur. Use common sense and caution when installing, maintaining, or operating this or any other appliance. General Safety Precautions TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: 1.
Preparation and Setup Planning the Installation The Heritage Integrated Hood Liner (RNIHL) is made from of non-combustible stainless steel. Its dimensions and design make it an excellent component for any custom hood. These liners fit the Heritage Integrated Ventilation Systems (RNIVS) shown in this table: hood canopy Compatibility Liner Model Model RNIHL30 RNIVS1 RNIVSR1 RNIHL36 RNIVS1 RNIVSR1 RNIHL48 RNIVS2 RNIVSR2 See the RNIVS Installation Instructions manual for details and specifications.
Preparation and Setup Product Specifications Tolerance: ±1/16” (±0.32 cm) Heritage Integrated Hood Liner (Model RNIHL) RNIHL Hood Liner Width Height Depth Weight RNIHL30 27 in 68.58 cm 2 in 5.08 cm 21 in 53.34 cm 5 lb. 2.3 kg RNIHL36 33 in 83.82 cm 2 in 5.08 cm 21 in 53.34 cm 5.5 lb. 2.5 kg RNIHL48 45 in 114.3 cm 2 in 5.08 cm 21 in 53.34 cm 7 lb 3.18 kg Depth Width Height Installed with a Heritage Integrated Ventilation System (Model RNIVS) RNIHL Hood Liner + RNIVS Int.
Installation Instructions Installing the RNIHL (Hood Liner) The hood canopy must already be mounted and ready for the ventilation system to be installed. But before the ventilation system is installed, the hood liner is fitted inside. hood canopy Refer to the following images when installing the hood liner. #2 To Install the RNIHL Hood Liner: 1. Position the RNIHL with the half-circle cutouts pointing forward. 2. Mount the RNIHL with mounting screws (not provided) at the corners of the liner.
Installation Instructions Installing the RNIVS (Ventilation System) The hood liner must be secured inside the hood canopy and ready for the ventilation system to be attached. Refer to the image below while installing the ventilation system. To Install the RNIVS: Verifying the Correct Setup See the RNIVS Installation Instructions, and follow the steps in Verifying the Correct Setup. NOTE: If the blower or lights do not function correctly, follow these troubleshooting steps: 1.
Care & Cleaning Maintaining the Hood Liner The RNIHL is a sheet of formed stainless steel. There are no moving or replaceable parts. No maintenance is required. Cleaning the Hood Liner Clean the RNIHL as you would any other stainless-steel surface. WARNING • Before cleaning, turn off power to the RNIVS. • Wait until the hood and cooking unit are safe to touch before cleaning. CAUTION • Always wipe stainless-steel with the grain. • Do not use abrasive cleaners/scrubbers on stainless steel or glass.
Warranty Review this section to learn the warranty and non-warranty terms and conditions concerning this product. For details/ clarifications, contact Dacor. What Is Covered—Certificate of Warranties: Dacor Range Hoods Within the 50 States of the USA, District of Columbia, and Canada* Full 1-Year Warranty The warranty applies only to the Dacor appliance sold to the first-use purchaser, starting from the date of original retail purchase or closing date for new construction, whichever period is longer.
fold here NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO 1600 CITY OF INDUSTRY CA POSTAGE WILL BE PAID BY ADDRESSEE DACOR ATTN WARRANTY PROCESSING DEPT PO BOX 90070 CITY OF INDUSTRY CA 91715-9907
Please visit www.dacor.com to activate your warranty online. WARRANTY INFORMATION IMPORTANT: Please rest assured that under no conditions will Dacor sell your name or any of the information on this form for mailing list purposes.
