Insert Liner Installation

Verifying the Correct Setup

See the RNIVS Installation Instructions, and follow the

steps in Verifying the Correct Setup.

NOTE: If the blower or lights do not function correctly,

follow these troubleshooting steps:

1. Verify that power is being supplied to the RNIVS.

2. Verify the electrical connections are wired correctly.

3. If the unit still does not work, contact Dacor Customer

Assurance:

833-353-5483.

Do not attempt to repair the unit yourself. Have the

model and serial numbers available when you call.

Dacor is not financially responsible for correcting

issues due to faulty installation.

Correct Placement & Setup

1. Feed the electrical wires through the hood liner

opening (see the previous graphic).

2. Push the RNIVS through opening of the RNIHL until it

stops.

3. Attach the RNIVS to the RNIHL using all the lock

washers and bolts (see images at right). This hardware

is provided.

4. The installed RNIVS will sit atop the RNIHL. The

assembled parts will look like the image on the right.

Make sure the RNIHL is securely fastened to the hood

canopy. The RNIHL will hold the weight of the RNIVS.

The hood liner must be secured inside the hood canopy

and ready for the ventilation system to be attached.

Refer to the image below while installing the ventilation

system.

To Install the RNIVS:

Installation Instructions

RNIHL RNIVS

RNIVS Installed on an RNIHL

lock washers

bolts

Installing the RNIVS (Ventilation

System)