Insert Liner Installation

6
Care & Cleaning
Maintaining the Hood Liner
The RNIHL is a sheet of formed stainless steel. There are
no moving or replaceable parts.
No maintenance is required.
Cleaning the Hood Liner
Clean the RNIHL as you would any other stainless-steel
surface.
WARNING
• Before cleaning, turn off power to the RNIVS.
• Wait until the hood and cooking unit are safe to touch before cleaning.
CAUTION
• Always wipe stainless-steel with the grain.
• Do not use abrasive cleaners/scrubbers on stainless steel or glass.
• To avoid damaging the fans, do not reinstall damaged filters.
• Adapt the cleaning cycle to the type/volume of cooking.
• Remove soil as soon after use as possible.
Cleaning Stainless-Steel Surfaces
• Clean the RNIHL with a mild solution of dish soap and
warm water, always wiping with the grain. (For best
results, use Dacor stainless-steel cleaner; contact Dacor
Customer Assurance to order the cleaner; see inside
front cover for contact information).
• Do not clean with abrasive cleaners or abrasive cloths.
• Rinse and dry with a micro-fiber or other soft, lint-free
cloth.