Installation Guide

Installation Instructions

Verify the Package Contents

Verify that all the components below have been provided. If any item is missing or damaged, please contact your dealer

immediately. Do not install a damaged or incomplete appliance. Make sure that you have everything necessary to ensure

proper installation before proceeding.

• Broil grill and pan

• Dacor Stainless Steel Cleaner

(stainless steel models only)

• Meat probe

Remove the oven door(s)

• Use and care manual

• Mounting screws (Wood, #6 X ¾, Dacor PN 83331,

4 for single ovens, 6 for double ovens)

• Standard oven racks (single ovens come with 1,

double ovens come with 2)

• GlideRack™ oven rack (single ovens come with 2,

double ovens come with 4)

Remove the door(s) to reduce weight and make the

oven easier to lift.

WARNING

• Do not attempt to disengage the hinge catches with

the door removed from the oven. The hinge springs

could release, causing personal injury.

• Do not lift or carry the oven door by the door handle.

• On double ovens, remove the bottom door first to

reduce the chance of damage.

1. Open the door to its fully opened position.

2. Using a pair of needle nose pliers and a flat blade

screwdriver, rotate the catch over the retaining arm on

each hinge.

3. Lift the oven door to about a 15° angle from the vertical

position.

4. Hold the door with both hands just below the handle

and pull it away from the oven while continuing to lift.

Gripping

point

Gripping

point

Steps 3 and 4

Retaining

arm

Catch

Steps 1 and 2