Installation Instructions Heritage Rangetop HRTP366, HRTP486 THIS APPLIANCE HAS BEEN TESTED IN ACCORDANCE WITH THE LATEST EDITION OF ANSI Z21.1 STANDARD FOR HOUSEHOLD GAS APPLIANCES. Part No. 113928 Rev.
Table of Contents Important Safety Instructions........................................... 1 Important Information About Safety Instructions............... 1 General Safety Precautions.............................................. 2 Installation Requirements................................................. 3 Electrical Requirements.................................................... 3 Gas Supply Requirements................................................ 3 Product Dimensions................................
Important Safety Instructions Important Information About Safety Instructions • The Important Safety Instructions and warnings in this manual are not meant to cover all possible problems and conditions that can occur. Use common sense and caution when installing, maintaining or operating this or any other appliance. • Always contact Dacor Customer Assurance with issues and conditions you cannot resolve. See If You Need Help... (previous page).
Important Safety Instructions General Safety Precautions To reduce the risk of fire, electric shock, serious injury or death when using your appliance, follow basic safety precautions, including the following: WARNING • Read the accompanying use and care manual completely before operating this appliance. • Keep packaging materials away from children. Plastic sheets and bags can cause suffocation. • If you receive a damaged product, immediately contact your dealer or builder.
Installation Requirements WARNING • The installation of this appliance must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54. • To prevent an electric shock hazard, the power supply must meet the specifications stated below. The electrical and gas supply data on this page is for reference only. If the requirements below do not agree with the product data label, use the data on the product data label.
Installation Requirements Cabinet and Countertop Layout • To reduce the risk of personal injury and to reduce accumulated smoke in the room, Dacor strongly recommends installing a range hood or downdraft vent. A hood should project horizontally a minimum of five (5) inches beyond the face of the cabinets. • The installation must allow access to the underside of the rangetop for service and inspection purposes, including the ability to turn off the rangetop gas supply valve and electrical outlet.
Installation Requirements Cabinet/Cutout Dimensions 10” (25.4 cm) to combustible side wall min. both sides Cabinet tolerances ±1/16” (±1.6 mm) unless otherwise noted. 1 1/2” (3.8 cm) typical countertop thickness 1/2” (1.3 cm) overhang, both sides B 7 3/4” (19.7 cm) Recommended gas and electrical service location, consult local code Mounting platform 1” (2.5 cm) min. thickness 36” (91.4 cm) typical Cabinet/Countertop Dimensions - Front View 13” (33.0 cm) max.3 C See note 2 15” (40.6 cm) min.
Installation Requirements Cabinet/Countertop Dimensions (cont.) Cabinet tolerances ±1/16” (±1.6 mm) unless otherwise noted. 24” (61.0 cm) Cabinet face Installed control panel overhang 1/3/8” (3.5 cm) Gas and electrical connections at right rear section of chassis Countertop Mounting platform Installed Rangetop - Side View Gas connection and power cord may be routed through bottom or back of chassis Increase countertop and overhang additional 2 1/2” (6.4 cm) min.
Installation Requirements Non combustible rear wall recommended 3/8” (1.0 cm) min. countertop overhang E Open to below to allow for raised vent, gas and electrical connections 2 5/8” (6.7 cm) 1/2” (1.3 cm) countertop overhang CL 11 7/16” (29.1 cm) Countertop 15” (38.1 cm) 1/2” (1.3 cm) countertop overhang 1” (2.5 cm) thick mounting platform min. Cabinet face below countertop overhang Countertop 26 5/8” (67.6 cm) min. cabinet depth 10” (2.5 cm) min.
Installation Instructions Unpack the Rangetop Rangetop Installation WARNING • If the gas and electric service provided does not meet the product specifications, do not proceed with the installation. Call the dealer, the gas supplier or a licensed electrician. • The rangetop is heavy. A minimum of two people are required to safely install it. Unpack the parts box and verify that all required components have been provided. If any item is missing or damaged, please contact your dealer immediately.
Installation Instructions Gas Line Connection WARNING • Verify that the gas supply meets specifications before connection. See page 3. • The maximum gas supply pressure to the regulator must never exceed 1/2 pounds per square inch (psi) or 3.5 kPa. • Do not install or use the rangetop without the included gas regulator installed. • Ensure that the arrow on the regulator points in the direction of the gas flow, towards the rangetop.
Installation Instructions Burner Component Installation WARNING • Never attempt to operate the rangetop with any of the burner parts removed. • Do not attempt to adjust the burner air mixture settings. All adjustments are preset at the factory. • Remove the burner parts and grates from their shipping packages. • Install the burners as shown. Either type (color) of the supplied burner caps may be used.
Installation Instructions Burner Knob Installation CAUTION Installing the rangetop knobs in the wrong position may result in damage to the rangetop griddle. The knobs for the center burners are marked with the maximum griddle settings. There are two (2) different types of knobs supplied with the rangetop. The knobs for the center burners have the words MAX GRIDDLE on them. • If not already installed, put the knobs with the words MAX GRIDDLE on them onto the inner (center burner) valve shafts.
Installation Instructions Verifying Proper Operation NOTE: If the rangetop does not operate properly, follow these troubleshooting steps: WARNING • • Make sure that power to the electrical outlet is turned off at the circuit breaker or fuse box and that the gas is turned off at the gas supply valve before proceeding. The rangetop must be properly grounded at all times when electrical power is applied. Prior to operating the rangetop, read the accompanying use and care manual carefully. 1.
Installation Instructions Installation Checklist WARNING • To ensure a safe and proper installation, the following checklist should be completed by the installer to ensure that no part of the installation has been overlooked. • Proper installation is the responsibility of the homeowner. The importance of proper installation of your Dacor rangetop cannot be overemphasized.
Wiring Diagram B 120V, 60Hz, 0.
Notes 15
Notes 16
Dacor ● 14425 Clark Avenue, City of Industry, CA 91745 ● Phone: (800) 793-0093 ● Fax: (626) 403-3130 ● www.dacor.
