User's Manual

GreenOK-II : Wireless Thermo-Hygro Monitor
User’s Manual (Rev 2.1)
-YX-
5. Replacing the Batteries
z This product uses 2 C-size alkaline batteries. If the LED of sensing unit doesn’t blinking fo r
several minutes, follow these steps to replace the batteries;
 Unscrew the 4 screw of the unit.
 Remove the old batteries.
 Make sure you install into the correct direction.
 Place the cover and screw firmly the 4 screw.
z If you put batteries (+/-) up in the opposite direction, it could be not work or cause damage.
z Make sure to use the specified alkaline batteries and replace two batteries at same time.
z Do not charge, short, break up the batteries that could Explosion and cause liq uid inside out.
z Dispose of the used batteries in an e nvironmentally proper manner.
<Figure 14> Replacing the Batteries