E INSTRUCTION MANUAL 14H1N, 20H1N 14H1T, 20H1T 14H2N, 20H2N 14H2T, 20H2T
W O R T H k n o w i n g Please keep the video machine’s guarantee card receipt safe for warranty purposes. Precautions ◆ Read carefully through this manual to familiarise yourself with this high quality televideo. ◆ Make sure the rating of your household electricity supply matches that shown on the back of the televideo. ◆ Refer to this chapter and the “Initial installation” chapter to help you install and adjust your televideo.
W O R T H Before doing anything with the televideo, please read the chapter “initial installation”.
CONTROLS ◆ The remote control is the principle means of control, but the main playback and record functions are also available on the front of televideo. The remote control unit To switch televideo on and off (stand by) Sound on/off Digit key 0/ATK : Auto tracking. Máx. 7 m 30˚ | 30˚ To delete input data or programme. Button for the sleep timer.(press repeatedly) To select internal or external input source. And a button for selection input source for recording. NORMAL1/NORMAL2/FAVOURITE picture control.
C o n t r o l s The front panel’s button E Remote senser PLAY REW/REV Indicator ST-BY : Stand by led(Red) REC/T.REC : Record/T.Rec(Red) Power on/off FF/CUE VOL/ PR.
I N I T I A L installation Please your televideo ◆ Horizontally on a flat, steady base so that air can circulate around it for ventilation. ◆ Away from humidity and heat, magnetic fields, such as those from loudspeakers etc. and with no heavy objects placed on top. Connecting up the televideo Switch off all components when connecting or disconnecting cables. ◆ Plug the aerial cable into “ANT” socket of the televideo.
◆ Press the main power switch on the front panel to turn on the set then the button. Languag, Country selection menus will be displayed. If you select menu you want, Combo will be tuning the channel. I n i t i a l INSTALLATION Setting time and date Clock Date : Sat 01/01/2000 Time : 00:00 VW : Change C B : Select E Call the televideo main menu. And move the cursor down to the “Clock” line. Access by pressing the CB button.
I N I T I A L installation ◆ If you want to use AV(Audio Video input) from a DVD or VCR instead of RF(Aerial input). Press the button . Automatic tuning system Select the Install menu at the Main menu. Place the cursor to “Auto setup” with the VW buttons. Install Auto seup Manual tuning Fine tuning Edit VW CB MENU : Select : Access : Return Press the CB button. Country selection menu will be displayed. Please select country. then access The cursor will move from left to right on the VHF,UHF Band.
I n i t i a l INSTALLATION Edit The Edit menu shows you the programme position assignment. You can change this programme position assignment according to your personal preferences. Moving the channels Position the cursor to Pr. No. to move and press the SLEEP button. Select Pr. No. colour will be changed. Position the cursor to Pr. No. to change and press the SLEEP button. Edit Pr. 01 02 03 04 05 Name ARTE ------------- VW : Select CB : Access : Store Ch.
P L A Y I N G c a s s e t t e s ◆ Your televideo is switched on by the main power switch on front panel and by the button. Playing back Load the cassette by pushing it smoothly and squarely into the cassette bay, with its windows pointing up.
P ◆ Your televideo is switched on by the main power switch on the front panel and by the button. l a y i n g CASSETTES Still Still picture from playback. Each press of the button advances the picture one frame. Play (B) button switches back to normal playback. Although you can see the picture, we can not guarantee still picture quality. Because of Still picture quality is very poor on 2-Heads mechines.
RECORDING c a s s e t t e s ◆ Your televideo is switched on by the main power switch on the front panel and by the button. Simple recording - REC LSTOP 0:12:34 Pr 01 ARTE Clock 12:34 MREC SP 0:12:34 Pr 01 ARTE Clock 12:34 PAUSE 0:12:34 Pr 01 ARTE Clock 12:34 LSTOP 0:12:34 Pr 01 ARTE Clock 12:34 Choose the station whose programme you want to record. Start your recording. If you wish to interrupt recording briefly -then continue. Stop your recording.
◆ For timer recording, clock, date, and stations must be set correctly. ◆ Load a cassette with its safety tab in place and with sufficient free space for the recording. ◆ To enter station numbers using the cursors VW. R e c o r d i n g CASSETTES Timer recording Timer programming No. Pr.
M O R ◆ Your televideo automatically sets electronic maker (index) at the beginning of each recording and timer recordings. It is these markers which the index function detects. E f u n c t i o n s INDEX +/F FF 0:12:34 INDEX 02 Pr 01 ARTE Clock 12:34 G REW 0:12:34 INDEX -02 Pr 01 ARTE Clock 12:34 Press the button depending on the number of recordings (index marks) that you wish to wind forward. e.g. 3x for 3 recordings ahead.
M o r e FUNCTIONS Cassettes Use only good quality tape cassettes with the VHS logo. ◆ Keep cassettes away from excessive moisture of dust, magnetic and electrical fields (loudspeakers and computer, for example). ◆ Always wind the tape to the beginning when you have finished. Store with the full spool at the botton and with the cassette in its cover. You can protect your precious recordings from being wiped by breaking out the safety tab on the side of the cassette (some cassettes have a slide).
M O R E ◆ You can program your televideo so that it switches on and/or off (with the selected station) at a time you want. f u n c t i o n s Wake up Timer in Miscellaneous Menu. Wake up Time : Pr. : VW: Select CB : Access --:--- CLEAR : Delete MENU : Return Press CBVW buttons to adjust to desired wake up time and Pr. No.
Connections ◆ Switch off all components when connecting or disconnecting cables.
Connections and ASSEMBLING Scart socket This is used to connect : a VCR a CAMCODER and a video game console or satellite TV receiver or DVD. In most cases, the set changes automatically to AV mode, when the VCR connected is in playback mode. If not, press the AV button on the remote controller. The AV will be displayed on the screen with the current programme number. In AV mode, you can change the TV programme number with the VW buttons or the Number buttons 0~9.
Connections and ASSEMBLING Before requesting service Mains supply the televideo’s power indicator does not light your televideo doesn’t work Recording doesn’t start, the cassette starts playback or is ejected. Play back no colour in picture reproduction, on tape playback Snowy picture on tape playback E – The mains lead is not connected to the wall socket. – Condensation may have formed when moving the televideo from a cold to a warm room. Wait until the video reach room temperature.