User's Manual

PIN CONNECTOR

CAUTIONS FOR ADJUSTMENT AND REPAIR

• Degaussing is always required when adjusting purity or convergence.

• The white balance adjustment has been done by a color analyzer in factory. The adjustment procedure,

described in the service manual is made by a visual check.

• Allow 20 minutes warm-up time for the display before checking or adjusting only electrical specification or

function.

• Reform the leadwire after any repair work.

Caution For Servicing

• In case of servicing or replacing CRT, high voltage sometimes remains in the anode of the CRT. Completely

discharge high voltage before servicing or replacing CRT to prevent a shock to the serviceman.

Arrangement of 15-pin D-sub connector

Pin Signal

1 Red

2 Green

3 Blue

4 GND

5 GND

6 GND - Red

7 GND - Green

8 GND - Blue

9 Reserved

10 GND - H.Sync

11 GND

12 Bi-directional Data (SDA)

13 Horizontal Sync

14 Vertical Sync (VCLK)

15 Data Clock (SCL)

610