CT6600øµπÆmenual 89.6.
CT6600øµπÆmenual 89.6.
CT6600øµπÆmenual 89.6.16 11:12 AM ∆‰¿Ã¡ˆ3 Contents CONTENTS Starting 4 How to use this manual / Check Items / System Setting 1. System Configuration 7 front Cpnfiguration / Rear Cpnfiguration 2. Srart to Install 8 Plugging keyboard and mouse / Plugging the Monitor Plugging the power cord / Plugging the RJ11 Phon line 3. System disassemble & upgrading 10 Disassembling Drawing /Upgrading Memory and installing the PCI option card 4. Mother board 15 Specification / Layout / Jumper Setting 5.
CT6600øµπÆmenual 89.6.16 11:12 AM ∆‰¿Ã¡ˆ4 CT6600 USER°Ø S GUIDE Starting This manual is for anyone who wants to setup and configure the PC. It will help you to use CT6600 computer easily. Please read this guide carefully before you install the system ¡ For your safety, remember to turn off the system and to disconnect all the cords and cables before opening the system chassis.
CT6600øµπÆmenual 89.6.16 11:12 AM ∆‰¿Ã¡ˆ5 Starting Your packing box includes CT6600, keyboard, mouse and power cord.
CT6600øµπÆmenual 89.6.
CT6600øµπÆmenual 89.6.16 11:12 AM ∆‰¿Ã¡ˆ7 System Configuration 1.
CT6600øµπÆmenual 89.6.16 11:12 AM ∆‰¿Ã¡ˆ8 CT6600 USER°Ø S GUIDE 2.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ9 Start to Install Connect the CRT monitor to the MONITOR OUT connector colored royal blue. If you want to use digital LCD monitor with DFP I/F, connect the digital LCD monitor to the DIGITAL MONITOR OUT connector colored white. Voltage Selection Switch Power Cord CT6600 Computer System applies both 110/220Vpower range with voltage selecting switch.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ10 CT6600 USER°Ø S GUIDE With telephone line connectivity, you can network PCs located anywhere in the same building where you have access to jacks from a single telephone line. Using this system, you can share the internet, printers, files, devices, etc. Connect phone jack and telephone line of the PCs you want to network with RJ11 telephone line 3. System disassemble & upgrading CT6600 provides many convenient options that gives you more system flexibility.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ11 System disassemble & upgrading board, to avoid possible damage to the system board. 4. Touch an unpainted metal surface on the computer chassis, such as the power supply, before touching anything inside your computer. To avoid static electricity that might harm internal component, please touch an unpainted metal surface on the computer chassis periodically. Touching components or contacts on a card or pins on a chip might cause damage of components.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ12 CT6600 USER°Ø S GUIDE This section is to describe that upgrading memory and Installing the PCI option card. Upgrading Memory This model has 64 Mbytes memory as a default and you can upgrade max 256 Mbytes when you need. How to install 1.Locate the two clips that hold the memory module in place. One clip holds the left edge of the module and the other clip holds the right edge. 2. Push both clips away from the socket. 3.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ13 System disassemble & upgrading How to remove 1. Locate the two clips that hold the memory module in place. One clip holds the left edge of the module and the other clip holds the right edge. 2. Push one clip away from the module. Then, while holding the module with one hand, push the other clip away from the module. DIMM Memory module DIMM Socket 3. Lift the module out of the socket 1. Unscrew and remove an empty slot guide 2.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ14 CT6600 USER°Ø S GUIDE PCI Slot Option PCI CARD Phone Tel Line(to the wall) . ° The Add-On Cards should be properly inserted in the slot.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ15 Mother board 4.
CT6600øµπÆmenual 89.6.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ17 Mother board Several hardware settings are made through the of jumper caps to connect jumper pins(JP) on the motherboard. Refer to motherboard layout on following page. The jumper settings will be described numerically such as°1-2° ,°2-3°for connect pins 1&2, connect pins 2&3 respectively, or°O N ( S h o r t )°, °OFF(Open)° a b JP3 : CMOS Clear The CMOS RAM is powerd by the onboard coin-cell battery or power supply. To clear the AC cord from the system.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ18 CT6600 USER°Ø S GUIDE JP7, JP8: Support ACPI S3 mode(STR)-option JP7 JP8 REMARK STR All OPEN 1-2, 3-4, 5-6, 7-8 Entering up to S3 Non-STR 1-2, 3-4, 5-6 All OPEN Entering up to S1 JP10: AUDIO Setting JP10 AUDIO DESCRIPTION 1-2 ENABLE Setting when use AUDIO on motherboard. 2-3 DISABLE Setting when AMR or PCI Audio. Internal VGA Setting This is not a jumper but, user can setting Enable/Disable on BIOS Setup.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ19 BIOS Setup 5. BIOS Setup The SETUP program is a built-in program that allows configuration of functions and devices of the system. This chapter provides information on how the setup program allows you to configure the function and device of your computer and how to configure each items on the setup menus. 1. SETUP can be invoked when the power is turned on or software rest is initiated.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ20 CT6600 USER°Ø S GUIDE 1. During boot-up sequence, press to display the SETUP menu. 2. Press to go to the °Exit°menu. 3. On the°Load Setup Deafaults°option, Press and select . 4. Select the°Exit Saving Changes°to save the default values and exit SETUP. To start Phoenix BIOS Setup utility : 1. Turn on or reboot your system. Phoenix BIOS displays this message: Press to enter SETUP or to load VBU(if enabled) 2.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ21 BIOS Setup Use this menu for basic system configuration. You can make the following selections on the Main Menu itself. ¡ System Time This option displays the current system time. Use <+> and <->keys to change the values. Press to move from the Hour to the Minute, to the second field. ¡ System Date This option displays the current system time. Use <+> and <-> keys to change the values. Press to move from the Month to the Date, to the Year field.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ22 CT6600 USER°Ø S GUIDE § Keyboard auto-repeat rate : Sets the number of times ™ a second to repeat a keystroke when you hold the key down. § Keyboard auto-repeat delay : Set the delay time after ™ the key is held down before it begins to repeat the keystroke. § Legacy USB Support : Enable/Disable for Legacy Universal ™ Serial Bus. ¡ System Memory Displays the amount of conventional system memory detected during bootup.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ23 BIOS Setup Use this menu to set the Advanced Features available on your system’s chipset. Selecting°Advanced°from the Menu Bar displays the Advanced Menu, Which looks like this : Phoenix BIOS Setup Utility Main Advanced Security Power Boot Exit Item Specfic Help Settup Warning Select the operating Setting items on this menu to incorrect values system installed on your may cause your system to malfunction. system which you will use most commonly.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ24 CT6600 USER°Ø S GUIDE ¡ Processor Serial Number Controls detection of processor Serial Number. (Note:this option woul show only if there is Pentium ¥² processor in your system.) ¡ Installed O/S Selected the operating system installed on your system which you will use most commonly (N o t e: An incorrecting setting can cause some operating systems to display unexpected behavior.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ25 BIOS Setup ¡ Local Bus IDE adqpter Enable or Disable the integrated local bus IDE adapter. Specifies an option from below. § § § § Disabled : Disabled the Local Bus IDE adapter.™ Primary:Use only the primary Local Bus IDE. ™ Secondary:Use only the Secondary Local Bus ™ IDE. Both :Use both Local Bus IDE adapters. ™ ¡ Spread Spectum When This item is enabled, are ENI noise can be extrimely minimized. ¡ I/O Device Configuration.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ26 CT6600 USER°Ø S GUIDE § Video BIOS ™ This option is selectable between°Degault VB°and°Updated VB° . Once it has both video BIOS in the system,you can select which video BIOS will be used by the internal graphic device. This option is automatically BIOS will be used by the internal graphic device. This opton is automatically switched to°Updqted VB°upon the end of a successfully updqte process.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ27 BIOS Setup d. Skip loading the video BIOS patch Once the system has a video BIOS patch loaded and enabled, it° s possible during the POST, to skip the updated patch and load the defaul one instead. This is accomplished by pressing the hot key(in the same time to press F2for setup). The system then do are-boot and load the default video BIOS.Keep in mind that system then do are-boot and load the defult video BIOS. Keep in mind that in the next boot.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ28 CT6600 USER°Ø S GUIDE Use this menu to set User and Supervisor Password and Backup and Virus check reminder.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ29 BIOS Setup To clear the current password, just hit on New Password and confirm Password.(Maximum 5 characters can be used for a password.) ¡ Password on boot Determines whether the password will be asked for in every boot(Enabled), or when entering in to the SETUP program(Disalded). Refer to the item named SET SUPERVISOR PSSWORD for the password setting. ¡ Diskette access This item allow you to control access to diskette drives.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ30 CT6600 USER°Ø S GUIDE § Hot-Key: It allows you to power on the system™by the Hot-key. (Ctrl+F1/Ctrl+f2/Ctrl+f3/Ctrl+F4) § Password: It allows you to power on the system ™ by the password that you entered. Use this menu to configure Power-Management features.
CT6600øµπÆmenual 89.6.16 11:13 AM ∆‰¿Ã¡ˆ31 BIOS Setup Support 4sec Power override. § Disabled: Use Power Button as Soft-off Button. ™ ¡ Power Savings Specify Power Savings option as following: § Maximum Power Saving:Conserves the greatest ™ amount of system power (Auto Suspend Timeout 5 Minutes) § Maximum Performance: Conserves power but ™ allows greatest system performance. (Stanby Timeout:16 Minutes, Auto Suspend Timeout:60Minutes) § Disabled: Turn off Power Management.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ32 CT6600 USER°Ø S GUIDE Use this menu to specify any drive as a boot drive. Selecting “Boot” from the Menu Bar displays the Boot menu, which looks like this: Phoenix BIOS Setup Utility Main Advanced Security Power Boot Exit Item specific Help 1. °a Removable Devices°b 2. °a Hard Drive°b 3. °a ATAPI CD-ROM Drive°b 4. °a Network Boot°b Use<®C >or<®D >to select a device, then press <+> to move it up the list, or <-> to move it down the list.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ33 BIOS Setup ¡ Hard Drive If you have more than one hard drive, select “Hard Drive” from the BootMenu. Select the hard drive to use for booting by using the up-and-down arrows. Then move it to the toop of this list using the <+> key. ¡ Removable Devicses If you have more than one removable device, select “Removable Devices” from the Boot Menu. Select the removable device to use for booting by using the up-and-down arrows.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ34 CT6600 USER°Ø S GUIDE Exits the current menu. Selecting “Exit” from the Menu Bar displays the Exit menu, which looks like this: Phoenix BIOS Setup Utility Main Advanced Security Power Boot Item specific Help Exit Saving Changes Exit Discaeding Changes Exit System Setup and Load Setup Defaults save your changes to Discard Changes CMOS.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ35 Driver Installation 6. Driver Installation The Inf files for Intel(R) 810 chipests contain Windows device installation files(*.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ36 CT6600 USER°Ø S GUIDE 36 ¡ Click the°yes°button. ¡ Click the°next°button. ¡ Click the°next°button, then Inf files will be copied to c:\program files\intel\intelInf directory.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ37 Driver Installation 2) Installing the Inf Update utility ¡ Run°Setup. exe°file in°Infinst°directory. (That is d:\infinst\setup.exe) ¡ Click°next° button, then you will be prompted to agree to the license agreement. ¡ Click°yes°button.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ38 CT6600 USER°Ø S GUIDE ¡ Click°finish°button then system will restart. Run the¡Setup.exe¡file in¡win9x¡directory. (d:\vga\win9x\Graphics\setup.exe) ¡ Click¡next¡button, then you will be prompted to agree to the license agreement.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ39 Driver Installation ¡ Click¡yes¡button. ¡ Click next butto, then the vga drivers will copied will copied c:\program files\intel\GfxDrvEUD diretory. ¡ Click¡finish¡button, then system will restart.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ40 CT6600 USER°Ø S GUIDE ° Click°start°button, select settings, and select control panel. ¡ Double click°System°icon, and select the Driver Manager tab. Then you can see the following figure. ¡ Select the°PCI Multimedia Audio Device° , and click°Remove°button. ¡ Click°Refresh°button. ¡ Click°next°button.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ41 Driver Installation ¡ Click°next°button. ¡ Check the°Specify a location°box, and type the location. (If you use Win98SE or Win2000, type d:\audio\win98se_2k.
CT6600øµπÆmenual 89.6.16 11:14 AM ∆‰¿Ã¡ˆ42 CT6600 USER°Ø S GUIDE ¡ 42 Click°next°button. Then System will copy driver files. ¡ Click°finish°button. ¡ Then the Device Manager tab will change like following figure.
