Owner's Manual

17
7. The dirty water must be drained out completely. Perform steps 2 and 3 in the Interior
Cleaning section.
8. Repeat steps 4 to 7 above three times with fresh water to rinse the ice-making system
completely. NOTE: Do not add any cleaning or sanitizing solution to the water
trough during the rinses.
9. If you want to make ice cubes after cleaning, turn off the power switch, drain off the
waste water, then turn on the power switch. The next ice-making cycle will begin.
10. Discard the first batch of ice..
Control Panel (located at left side of front bottom louver panel)
Push the control panel cover to open it. The control panel includes one power switch,
one button, one adjustable screw and four indicator lights.
Operation of the control panel:
1. When the unit is plugged in and the power switch is turned on, the power indicator
and the other three indicator lights are all on.
2. After 3 minutes for water inlet, the ice machine will start to make ice automatically.
Only the power and ice-making indicators will be on.
3. During harvesting, the harvest indicator light is on and the ice-making indicator is off.
When the ice storage bin is full, only the ice-full indicator and power indicator are
on.