REAR PROJECTION TV INSTRUCTION MANUAL DJ DJ DJ DJ - 4710 / 5510 4720 / 5520 4710E / 5510E 4720E / 5520E P/N:48586113E203-R0
PROJECTION TV CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
IMPORTANT SAFEGUARDS Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3.
12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 14.
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user's own safety, and the proper operation of the product. In case of an accident, please unplug the unit from the outlet immediately. -4- To reduce the risk of electric shock, do not remove cover or back. No user -serviceable parts inside. Refer to qualified service personnel for repair.
Caution Please keep the user's manual in a safe place for future reference. This section must be read carefully and followed by the user when installing and transporting the product. Do not put volatile substance-such as benzene, naphtha- near the product since it may cause a change in the product's colour.
This product has advantages as follows. MAIN POWER CH VOL TIMER STAND BY MENU TV/COMP. TV/VIDEO POWER Large Screen Adopts Dolby Virtual Your viewing is made more enjoyable because your new projection TV has a 47” screen. You can enjoy vivid and stereo sound as in a theatre. Various Screen You can watch various sizes of screen such as 16:9, 4:3, Panorama and you can adjust Zoom mode.
Table of Contents Installation and Maintenance Antenna Connection 8 Video Connection 11 Camcorder & Video Game Connection 12 DVD Connection 13 Cable TV Broadcasting Connection 14 Name of Each Part 16 Basic Guide Method To Use Basic Menu 20 To Watch TV 21 Setting Up TV Stations 23 Selection of Input Signal 29 Application Guide Screen Adjustment 30 Adjustment of Colour Match 33 Sound Adjustment 36 Adjustment of Time 40 Selection of Language 44 Teletext 45 Troubleshooting 46
Antenna Connection Indoor Antenna Connection 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR Unclear screen image and bad reception may be a cause of wrong antenna connection. Be sure to check its direction and place when installing. 2. Connect the combining adapter to the antenna input at the back of the TV set. WHEN USING THE COMBINING ADAPTER You may obtain the combining adapter at your closest Service Center.
CTV Antenna Connection Such community TV Antenna installation may be found in most of co-op apartments. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right.
Outdoor Antenna Connection Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection. VHF Antenna UHF Antenna COMPONENT Y AV3 AUDIO Cb L Cr R AV2 AV1 ANT/CABLE Separate Antenna Connection.
Video Connection Connecting with an External Source You may connect S-Video input to enjoy clearer and brighter picture images. You can make the connection with the AV4 input. Connection is not necessary in Mono mode. Connecting with SCART VIDEO 1. Prepare the scart lead for picture / sound. 2. Connect the SCART input / output terminal of VIDEO with the SCART1(AV1), SCART2(AV2), SCART3(AV3, input only) input / output terminal of TV. 3.
Camcorder & Video Game Connection Watching the Camcorder Recording on TV -Use the input jack provided at the side panel of the TV set. -Use the same connection method for Video Game.
DVD Connection (Component Video Method) DVD -480i input signal is possible for DVD input. -DVD screen output is composed of three separate primary colour jack(Y/Cb/Cr), resulting in a higher image quality. -Y/Cb/Cr, may also be noted as Y/PB/PR or Y/Pb/Pr in different DVD players. -The DVD player s audio output must be connected to the DVD audio input socket at the back of the TV set. -If your DVD player does not have component video output use scart or composite video connections.
Cable TV Broadcasting Connection External Input Connection Source Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. You may make the connection to any of the Component input and SCART input AV1, AV2 & AV3.
Antenna Input Connection Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver.
Name of Each Part Front Panel Buttons on the TV set have the same function as those of the remote controller. Front Panel Button If you turn the TV set off by pressing the ON/OFF button at this panel, it is as unplugging the power cord from the outlet since this will prevent all operation of both the TV set and the remote controller. Unless you are not using the unit for a long period of time, have the main power on this panel turned on at all times.
Side and Rear Panel Side Panel It is convenient to use the input jacks provided at the side panel when connecting to the camcorder or Video Game.
Parts of the remote controller This remote controller is universal; thus, it may be convertible for TV, Video, CTV, etc. Power Mute Recall AV1 / AV2 / S-VHS2 / AV3 / AV4(S-VHS4) /Component/RF Program number (0-9) Use to select channel directly 0~9 Sleep Childlock VIRTUAL DOLBY SOUND MODE ASPECT STILL This feature is used to set up the time of automatic turn off. Sound mode Mono, Forced Mono, Stereo, Subsound PICTURE This feature allows you to choose the mode.
Page Up Page Down Red Green Blue Yellow Text/TV Reveal Size Cancel Subpage Hold When the TV screen image is unclear Do not drop or spill liquid on it. Do not expose to heat, dust, or humidity Index Mix BATTERY INSTALLATION Push to open the cover of the remote controller Set the batteries in the battery cell after checking the polarity, and then replace the cover.
Method To Use Basic Menu Basic Menu - The basic menu appears on the screen if you press the menu button of the remote control. - There are 5 items Picture, Screen, Sound, Function, and Install in the basic menu. - Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward. Press the “Menu” button. D I M SP O LA D Y E • The main menu appears if you press the Menu button.
To Watch TV On/Off, Number, Mute, Recall, ◀/▶/▼/▲ - Buttons with same name in the main body performs same function. Press the “ON/OFF” button of the front of the set. • The buttons of the remote control and the main body operate only when pressing the “ON/OFF” button of the main body. The remote control and the main body do not operate if turning the “ON/OFF” button of the main body off.
TO Watch TV Press the “ON/OFF” button. • Press the “ON/OFF” button of the main body. • The main power lamp turns on in red colour. • Press the “Power” button of the main body or the “Power” button of the remote control. • The main power lamp turns on in “green” colour and the TV turns on. ON/OFF Press the “▼PR▲” button. ZO O M • Select the desired program by pressing the “▼PR▲” button or the number button. Ex) Program 09 O K DY BANA SSMIC D I M SP O LA D Y E Adjust volume.
Setting Up TV Stations Auto Tuning - All stations that can be received are stored by this method. It is recommended that you use Auto tuning during installation of this set. VIR DO TUAL LBY PIC SO MOUND DE TUR E ASP ECT STIL L AY PL DIS ODE M OM ZO MIC NA DYBASS OK Repeatedly press the Menu button to select the Install menu.
Auto Tuning D I M SP O LA D Y E ZO DY BANA SSMIC ▶ button to display the Auto tuning menu. Press the VOL▶ K O O M ◀VOL▶ ▶” button. Select the country you require with “◀ Auto Tuning ZO O M Country Set Norway PR 19 Pal / Secam K O DY BANA SSMIC D I M SP O LA D Y E Country Set OK Start MENU Exit Press the OK button. ZO M O • Auto tuning will begin, your stations will be located and stored.
Edit The Edit menu shows you information as follows: - Program position assignment : Program number and Station name, Real channel number. - Picture information : PAL, SECAM, SECAM-L - Sound information : Auto, L, DK3, DK2, DK1, I, BG - Skip : information : Yes, No Deleting the program positions D I M SP O LA D Y E O O DY BANA SSMIC ZO M K • Position the selection bar to program number to delete with the “▼PR▲” buttons. Note that you can move the selection bar when the cursor is on the PR.
Manual tuning Press the Number buttons(0~9) or the “▼PR▲” button to select a program number you want. D I M SP O LA D Y E O M O DY BANA SSMIC ZO K Manual Tuning VIRTUAL DOLBY SOUND MODE ASPECT STILL Pr 01 Secam-L PICTURE Pr Change OK Store MENU Exit M O ZO K O DY BANA SSMIC D I M SP O LA D Y E Access Locate the selection bar on the Manual tuning at the Install menu.
◀VOL▶ ▶” buttons. Press the “◀ M O K • A tuning screen will appear and cursor will move from left to right / from right to left. If you want to stop tuning press the Menu button. After searching a station, you must press the OK button to store the Program. Searching for channels in the Edit menu You can also search a channel in the Edit menu. D I M SP O LA D Y E ZO O O K DY BANA SSMIC ZO O DY BANA SSMIC D I M SP O LA D Y E M • Position a selection bar to the PR number you want.
Fine tuning - If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the Fine tuning. Move the selection bar to Fine tuning and press the ◀VOL▶ ▶” buttons to activate Fine tuning up or down. “◀ D I M SP O LA D Y E ZO M O O DY BANA SSMIC Fine Tuning K Pr Change PICTURE SOUND MODE ASPECT STILL MENU ◀VOL▶ ▶” Note that if only operates while the “◀ button is being pressed.
Selection of Input Signal When watching video, Camcorder, DVD, Cable TV - See 11p for connection method of TV and “Video”. Press the “ (AV)” button. • Screen changes as follows whenever pressing the “ button.
Screen Adjustment When setting up various screen modes - The user may select various screens designed for a good picture without adjusting the brightness, contrast or colour individually. Press the “Picture” button. PICTURE PICTURE -30- SOUND MODE ASPECT STILL M O ZO K O DY BANA SSMIC D I M SP O LA D Y E VIRTUAL DOLBY • The screen adjustment status changes as the following screens are displayed sequentially whenever pressing the “Picture” button.
When adjusting the screen to taste - You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc to the user’s taste. Select “Picture” by pressing the “Menu” button. • The menu screen appears as follows.
Adjustment of Screen Size - Randomly change the size of the screen. Pleasure for enjoying the TV increases further. - The AUTO screen operates when power is turned on firstly. Press the “Aspect” and “Zoom” button. • The screen changes as below whenever pressing the “Aspect” and “Zoom” button.
Adjustment of Colour Match Convergence - This function enables you to adjust the colour convergence of the screen during receiving the signals. When the set is first installed or it is relocated, the picture may be unstable with three colour(Red, Green, Blue). This problem can be solved by adjusting the colour convergence. Press the “Menu” button. • The Menu screen appears as on the right.
Convergence ▲” button to ◀VOL▶ ▶, ▼PR▲ Press the “◀ superimpose the red display “+” with the Green one. VIRTUAL DOLBY SOUND MODE ASPECT STILL ZO O M K O DY BANA SSMIC D I M SP O LA D Y E • The display “+” is moved to the left, right, up or down by pressing the “◀VOL▶, ▼PR ▲” button. If the red display “+” is superimposed with the green one, the display “+” will be change to yellow.
Setup of Child Lock - This is function to prevent the use of the TV set without the remote control. Press the “Lock” button. • On-Off of the Child Lock Control is repeated whenever pressing the “Lock” button. • If the Child Lock is “On”, then the set can only be switched back on using the remote control.
Sound Adjust When selecting various sound modes Press the “Sound Mode” button. SOUND MODE PICTURE -36- SOUND MODE ASPECT STILL M O ZO K O DY BANA SSMIC D I M SP O LA D Y E VIRTUAL DOLBY • The sound status changes while the following screens display in turn whenever pressing the Sound Mode button.
When adjusting sound to taste - The user can enjoy various the sounds by adjusting Sound Mode, Equalizer, Virtual Dolby, Dynamic Bass and Balance What’s equalizer? Select “Sound” by pressing the “Menu” button.
Select Virtual Dolby Mode D I M SP O LA D Y E SOUND MODE ASPECT STILL K VIRTUAL DOLBY O DY BANA SSMIC ZO O M • You can perceive, orientation and a cubic effect through the left/right speaker by developing the existing surround system function. • If you select “Virtual Dolby” or, Panorama and 3D Panorama which is repeated whenever you press the “VOL▶” button. • You can also operate this function with the direct key [Virtual dolby] in your remote control.
Multi-Sound and Stereo Press the “ PICTURE VIRTUAL DOLBY SOUND MODE ASPECT STILL ” button. • The status changes whilst the following screens sequentially appear when pressing the button. PR 19 Mono Clock 12 : 00 PICTURE SOUND MODE ASPECT STILL • In Stereo reception if the stereo is weak, you can switch to MONO by pressing the “ ” button. Then the “MONO” Colour will be change to Red. In Mono reception the depth of sound is improved. To switch back to stereo, press the “ ” button again.
Adjustment of Time Adjustment of Time - You must previously adjust current time in order to reserve Automatic On/Off. Select “Function” by pressing the “Menu” button. • The menu screen appears as follows.
Adjustment of Time Setting the Time ZO M O O K DY BANA SSMIC D I M SP O LA D Y E • Place the cursor to Hour / Minute with “◀VOL▶” buttons. • Set the Hour / Minute with the “▼PR▲” buttons. • Place the cursor to Time with “◀VOL▶” buttons and then press the Menu button to complete.
Setup of Off-time The red lamp turns on whether setting up either Off-time/ On-time. This function is very convenient since the TV automatically turns off at the fixed time if reserving the Off-time for sleeping time or at desired time. If adjusted once, this function operates everyday unless you cancel the Off-time setup or switch off the main power button. You can reserve current time if setting it up previously. N.B.On/Off time setup is erased if you turn the main power off.
Choosing Set Amounts of Minutes Before Sleep Time - This function is designed to turn off the TV after a fixed amount of time (10min~120min) has passed from the current time. - Adjust sleep time with sleep button on the remote control. Press the “SLEEP” button.
Selection of Language Selection of Language This function enables you to select the language of the on screen menus displayed on the TV screen.
Teletext Switching Teletext ON/OFF Press the Text button ( ) The index page or the page viewed last will appear. Press the Text button again to return to the TV mode. Colour buttons in TOP/FLOF Teletext A red, green, yellow and cyan field is shown at the bottom of the screen. If TOP or FLOF Teletext is transmitted by the station, pressing the corresponding colour button on the remote controller, allows you to easily select the desired page easily.
Troubleshooting Symptoms and Solutions Please check the following list prior to calling Daewoo Electronics Service Centre for assistance -46- Is the TV power cord plugged into the outlet correctly? Please check the power cord and connect it properly to the outlet. Press the main power button at the front controller panel. Has the "mute" button at the remote controller been pressed accidentally? Have you checked its volume? Press the "mute" button on the remote controller once more.
Standard of Product Model DJ - 4710/5510, DJ - 4720/5520, DJ - 4710E/5510E, DJ - 4720E/5520E VHF Receipt Channel UHF Band I Band II : CH02 ~ CH04 : CH05 ~ CH12 Cable Band : S1’ ~ S3’, S1 ~ S20 Hyper Band : S21 ~ S41 Band IV, V : CH21 ~ CH69 Screen Size 119cm(47”), 139cm(55”) Signal Method PAL / SECAM Speaker Output 10W / ch (Main L/R) Power 220-240V ~, 50/60Hz Power Consumption 195W Dimension (W/H/D) Weight 1110 x 1210 x 533mm(4710), 1278 x 1352 x 586mm(5510) 1110 x 1210 x 530mm(4720),