DTBC-MNF(or D)1NP-AG 2007.9.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 1 Safety Instructions INTRODUCTION Please keep the product’s guarantee sheet and receipt in a safe place. Precautions • Read this booklet carefully. • Make sure the rating of your household electricity supply matches that shown on the back of your product. • Read this page and chapter ‘Setting up your product’ to help you set up and adjust your product correctly. • Do not put the product in a hot or humid place. • Do not open the product.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 2 Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 3 Important Safeguards 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2 RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3 HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4 FOLLOW INSTRUCTIONS All operating and use instructions should be followed.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 4 Important Safeguards 18 SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19 DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power-supply cord or plug is damaged. B.
DTBC-MNF(or D)1NP-AG 2007.9.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 6 Introduction Thank you for purchasing the DVB-T VCR/DVD recorder. Equipped with the latest technology and design, the DRVT-40/DRVT-43 is a set-top box ideal for digital terrestrial broadcast reception and a VCR/DVD Recorder. The simple installation and operation, user-friendly tree structured OSD, Digital audio output that’s Dolby Digital ready, and advanced video clarity made for TV that’s designed to enrich the viewer experience.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 7 Overview Features Which discs you can use MPEG-2 Digital & Fully DVB-T Compliant The following discs can be used in your DVB-T VCR/DVD Recorder: Interactivity & Digital Teletext (MHEG 5) • Allows a split screen combination of your programme plus live text news & sport information.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 8 Overview Features Regional code Track (Audio CD only) If the region number on your DVD disc does not correspond to the region number of this player, the disc cannot be played.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 9 Overview Features • recordings made on your DVB-T VCR/DVD Recorder can be played on other DVD video players and DVD-ROM drives. About DVD Recording Notes on Recording • The recording times shown are not exact because the DVB-T VCR/DVD Recorder uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 10 Overview Features Precautions Handling the Unit Caution When shipping the unit The original shipping carton and packing materials will come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 11 Overview Features Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVB-T VCR/DVD Recorder using a single DV cable for input and output of audio, video, data and control signals. The i.LINK interface is also known as IEEE 13941995. ‘i.LINK’ and the ‘i.LINK’ logo are trademarks. • The DVB-T VCR/DVD Recorder is only compatible with DV-format (DVC-SD) camcorders.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 12 Identification of Controls Front Panel ! @ # DRVT-40 $ % ^ * & ( ! ) 12 3 4 @ 5 67 # DRVT-43 $ % ^ * & ( ! STANDBY/ON Turns the DVB-T VCR/DVD Recorder on and off. @ Cassette Compartment (VCR deck) Insert a video cassette here. # Disc Tray (DVD deck) Insert a disc here. $ VCR EJECT Ejects the tape in the VCR deck. % REC Starts recording. Press repeatedly to set the recording time. ^ STOP Stops playback or recording.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 13 Identification of Controls INTRODUCTION Front Panel Display Channel 001 Recording on tape TV Channel Input mode AV-1 AV1 input AV-2 AV2 input F-AV Front - AV input DV 11:15 Indicates a VCR Timer Recording is set. 11:15 Indicates a VCR Timer Recording is in standby mode. REC Indicates the VCR is recording.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 14 Identification of Controls Remote Control Turns the DVB-T VCR/DVD Recorder on and off. - Opens and closes the disc tray in DVD mode. - Ejects the tape in the VCR deck in VCR mode. Selects VCR mode. Selects DVD mode. Switches between the DVB-T VCR/DVD Recorder tuner or your TV tuner. - Selects numbered options in menus. - Selects TV channels. - Manually adjusts tracking. Displays information on the disc when you press this button once.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 15 Identification of Controls Selects an audio language (DVD), audio channel (CD) or audio type (TV). Selects a subtitle language, if available. Repeats the current chapter, track, title or the entire disc. Repeats playback between two points (A and B). Displays a disc’s Title menu, if available. Enlarges the DVD video image. Selects a DVD camera angle, if available. Resets the tape counter in VCR mode. Displays the Timer Recording menu.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 16 Identification of Controls Rear panel ! @ ) ! AC Power Cord Plug into a power outlet. @ AUDIO OUT (L, R) Connect to a TV or other equipment with audio inputs. # COMPONENT VIDEO OUT (Y Pb Pr) Connect to a TV with Component Video (Y Pb Pr) inputs. $ Scart socket 2 Connection of an additional device (satellite receiver, set-top box, video recorder, camcorder, etc.) % RF OUT (TO TV) Connect to a TV with an RF input. ^ RF IN (FROM ANT.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 17 Connections Connecting a TV Choose one of the following TV connections, depending on the capabilities of your equipment. Rear of TV ANTENNA INPUT Pr Pb Y Caution • Make sure the DVB-T VCR/DVD Recorder is connected directly to the TV, and the TV is set to the correct video input. • Do not connect the DVB-T VCR/DVD Recorder’s AUDIO OUT jack to the phone in jack (record deck) of your audio system. • Do not connect the unit through a VCR.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 18 Connections S-Video Connection 1 Connect the S-VIDEO OUT jack on the DVB-T VCR/DVD Recorder to the S-Video in jack on your TV using an S-Video cable (S). 2 Connect the Left and Right AUDIO OUT jacks from the DVB-T VCR/DVD Recorder to the left/right audio in jacks on your TV using the audio cables.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 19 Connections Connecting an Amplifier/Receiver Connecting to an amplifier equipped with two channel analogue stereo or Dolby Pro Logic ll/Pro Logic Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS) 1 Connect the DVB-T VCR/DVD Recorder’s DIGITAL AUDIO OUT jack (Coaxial) to the corresponding in jack on your amplifier.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 20 Connections Connecting to USB Connecting a Digital Camcorder Using the USB input connector, you can use a USB memory stick as the playable media. JPEG, MP3 and DivX media files can be played from USB memory. Using the front panel DV IN jack, it is possible to connect a DV digital camcorder, video deck or DVD+R/RW recorder and digitally transfer DV tapes or DVD+R/RW discs to DVD±R or DVD±RW .
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 21 Initial Installation After successfully connecting your DVB-T VCR/DVD Recorder to your TV and other devices, this chapter will show you how to complete the initial installation. Switch on your DVD recorder. An ‘Auto Tune’ message is displayed on the screen. Press the [RED] button to start auto tune. 2 The DVB-T VCR/DVD Recorder detects channels automatically and stores them in the memory.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 22 Guide to Digital Services EPG (Electronic Programme Guide) The EPG provides a quick and easy way to: • View a complete list of all available channels. • View a channel list related to a chosen category. • Set a programme to be recorded (page 50). 2 You can continue to watch the current programme on a small TV picture of the current selelcted programme before the EPG was pressed in the bottom half of the screen. 3 Press […/†/œ/√] to move around the list.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 23 Guide to Digital Servicess Viewing programmes using Category Search This feature allows you to search for programmes related to a particular topic. For example, if you select “Sports” from the category search list, then only programmes related to Sports will be shown in the EPG. Note The category of each programme is determined by the broadcaster. 1 Press [EPG] to display the EPG. 2 Press [GREEN].
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 24 Information Service Many digital TV channels broadcast information via their text service. This digital service includes high quality digital text and graphics along with advanced navigation options. Additionally, this recorder has access to dedicated text channels transmitted by the broadcasters. • The appearance, content and navigation methods of all digital text services are decided by the broadcaster.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 25 Setup menu Setup Menu Overview INSTALLATION Settings The DVB-T VCR/DVD Recorder Setup menu includes 7 categories, including: Installation, Record/Play Options, Languages, Preferences, Parental Settings, System Info, and Update/Restore. Press [SETUP] and [œ/√] on the remote control to view the first and second levels of the Setup menu.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 26 Setup menu Delete Channels Reorder Channels After tuning TV or Radio stations into your DVB-T VCR/DVD Recorder, you may wish to delete a station. After tuning TV or Radio stations into your DVB-T VCR/DVD Recorder, you may wish to change the order of the stations you have in your set to your preference. 1 2 3 4 26 Press [SETUP]. The Setup menu appears. 1 Follow steps 1-2 as shown under ‘Delete Channels’. 2 Use […/†] to select ‘Reorder Channels‘.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 27 Setup menu Edit Favourites Set Clock After tuning TV or Radio stations into your recorder, you may store or edit your favourite channels into TV or Radio lists. You can set or modify the system clock. 1 2 Follow steps 1-2 as shown under ‘Delete Channels’. 1 Follow steps 1-2 as shown under ‘Delete Channels’. 2 Use […/†] to select ‘Set Clock’. 3 Press [OK]. The ‘Set Clock’ menu appears.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 28 Setup menu RECORD/PLAY OPTIONS Settings DVD Record Quality You can set the default DVD recording quality to (Approx. time) : HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SEP (Super Extended Play - 8 hrs/disc). 1 2 3 Press [SETUP]. The Setup menu appears. 4 Use [œ/√] to select the desired Record Quality (HQ, SP, EP, or SEP). 5 Press [SETUP] to exit the menu.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 29 Setup menu LANGUAGES Settings OSD Language The OSD Language is fixed in ‘English’. DVB Audio/ DVB Subtitles / EPG Language and DVB Subtitles mode Select a language for the DVB-T VCR/DVD Recorder Setup menu and on-screen displays. 1 2 3 Use [œ] and [√] to select ‘Languages’. Whilst ‘Languages’ is selected. Press [†] to select ‘DVB Audio’ , ‘DVB Subtitles’, ‘DVB Subtitles mode’ or ‘EPG Language’. Use [œ/√] to select the desired language.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 30 Setup menu PREFERENCES Settings TV Aspect Ratio 1 Press [SETUP]. 2 Use [œ/√] to select ‘Preferences‘. 3 Whilst ‘Preferences‘ is selected, press [†] to Picture Format 1 Press [SETUP]. 2 Use [œ/√] to select ‘Preferences‘. 3 While ‘Preferences‘ is selected, press [†] to select ‘Television’. select ‘Picture Format’. 4 Use [œ/√] to select the desired TV Aspect ratio. 4 Use [œ/√] to select the desired Picture Format. 5 Press [SETUP] to exit the menu.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 31 Setup menu Digital Audio 1 Press [SETUP]. 2 Use [œ/√] to select ‘Preferences‘. 3 Whilst ‘Preferences‘ is selected, press [†] to select ‘Digital Audio‘. 4 5 Use [œ/√] to select the desired digital output type. Press [SETUP] to exit the menu. Video Output Progressive Scan Video provides the highest picture quality with reduced flickering.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 32 Setup menu Parental Settings Set the new password to something other than '0000'. Rating Level The Parental Settings feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. You can set the Rating Level from ‘OFF’ to ‘U’ to a maximum ‘18R’. 1 2 3 5 After setting the password, press the Red button to end. Then the ‘Parental Setting’ screen is displayed.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 33 Setup menu Watershed Time For children, you may also use the watershed time function. When the watershed time function starts, only a black screen appears. 1 Follow steps 1-3 as shown under ‘Rating Level. 2 3 Use […/†] to select ‘Watershed Time. Use [œ/√] to select the desired watershed time. • If it is canceled by entering the correct parental code, the cancellation is only valid until the next day watershed time.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 34 Setup menu Change PIN code 1 Follow steps 1-3 as shown under ‘Country Code. 2 3 Use […/†] to select ‘Change PIN code’. 4 The ‘Change Pin Code’ screen appears. Enter your new 4-digit password. 5 To confirm the new password, press the Red button. Press [OK] to select the Change PIN code mode. • Master Password : If you forget your password, press 3,3,0,8 on the remote control and then press [ENTER]. • Set the new password to something other than '0000'.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 35 Setup menu SYSTEM Info Firmware Info System Information helps service personnel identify firmware information about your DVB-T VCR/DVD Recorder in case service is required. 1 2 3 4 5 Press [SETUP]. The Setup menu appears. Use [œ] and [√] to select ‘System Info‘. Use […/†] to select ‘Firmware Info’. DivX VOD 1 Follow steps 1-2 as shown under ‘Firmware Info. 2 3 4 Use […/†] to select ‘DivX VOD’. Press [OK] to select the DivX VOD.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 36 Setup menu Update/ Restore Software Update Restore Default Settings If you wish, you can check for software updates. If you wish, you can reset the DVB-T VCR/DVD Recorder to its original factory settings. 1 2 3 4 Press [SETUP]. The Setup menu appears. Press [SETUP]. The Setup menu appears. While ‘Update/Restore‘ is selected, press [†] to select ‘Check For Software Update‘. 1 2 3 Press [OK] to set the ‘Check For Software Update’.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 37 On-Screen Display Overview The On-Screen Display provides feedback on the status of the DVB-T VCR/DVD Recorder and/or the currently loaded disc. To access the On-Screen Display (or OSD), press [INFO].
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 38 On-Screen Display Overview Angle Shows the current angle number and total number of angles, and changes the angle number. 1 Press [INFO] twice during playback. The on-screen display appears on the TV screen. 2 Use […†] to select the ‘Angle‘ line on the onscreen display. 3 Use [œ/√] to change the angle numbers. PBC Shows the current PBC status, and changes the setting. PBC is PlayBack Control used for VCD, SVCD, and some DVDs.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 39 DVD Playback Playing a DVD 1 Turn the TV on and select the video input source connected to the DVB-T VCR/DVD Recorder. • A disc which is recorded with unauthorized movie material may not be played. • A disc which is recorded by another recorder or not recorded correctly may not be recognised or played. Audio system: Turn the audio system on and select the input source connected to the DVB-T VCR/DVD Recorder. 2 Press [DVD] to select the DVD mode.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 40 DVD Playback Zoom Selecting Titles The Zoom function allows you to magnify the video image and scroll around the enlarged image. When a disc has more than one title, you can select among all available titles as follows: 1 1 Press [ZOOM] during Play mode to activate the Zoom function. Each press of the [ZOOM] button changes the Zoom level as follows: X2 ➝ X4 ➝ X1 (normal size) 2 Use the [œ √…†] buttons to scroll around the zoomed picture.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 41 Playing a Picture, Music or DivX files DivX Playback (DVD, USB) The DVB-T VCR/DVD Recorder can play DivX files on a disc such as CD-R/RW, DVD+R/RW, DVDR/RW or on USB Media. 1 2 Prior to playing Divx files on disc or USB device, insert disc and close the tray, or connect the device to USB jack in the front panel of VCR/DVD Recorder. Press [MENU] to bring up the Media Browser and select the media (Disc Media, USB Media) you want to play.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 42 Playing a Picture, Music or DivX files Audio CD Playback The DVB-T VCR/DVD Recorder can play audio CDs on CD-R/RW, DVD+R/RW, DVD-R/RW. 1 2 Insert an Audio CD and close the tray. 3 The CD Music folder tree appears. Use […†] to select a track or a file, then press [OK]. The Main Menu appears on the TV screen. Use […†] to select ‘Disc Music’, then press [OK]. Playback will stop at the end of the disc.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 43 Playing a Picture, Music or DivX files Playing MP3 Files during a Slide Show You can enjoy a slide show while listening to MP3 music files. 5 The full size image will be displayed and a slide show starts automatically with a time interval of 10 seconds. Press [NEXT] or [PREV] to manually skip to the next or previous image. 7 Press [√] (or [œ]) to rotate the image (counter) clockwise. 8 Press [STOP] to exit the slideshow.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 44 VCR Playback Before You Begin Tracking Control 1 Press the [VCR] button to set the remote control to Auto Tracking operate the VCR deck. 2 Turn the TV on and select the video input source connected to the DVB-T VCR/DVD Recorder. Audio system: Turn the external audio system on and select the input source connected to the DVB-T VCR/DVD Recorder. Playing a VHS Tape 1 Insert a prerecorded video cassette.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 45 VCR Playback Special Playback Features Notes on special playback features (EG: FFW or FBWD) Counter Memory Function Horizontal lines (noise bars) will appear on the TV screen. This is normal. The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc. During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 46 Basic Recording Recording to TV One Touch Record (OTR) Follow the instructions below to record a TV program. One Touch Recording allows you to add recording time in fixed increments at the touch of a button. 1 Turn on the DVB-T VCR/DVD Recorder and load a 1 Follow steps 1-4 under Recording from TV. 2 Press [REC (●)] repeatedly to set the length of the recordable disc or tape. Make sure your TV input is set to view the DVB-T VCR/DVD Recorder.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 47 Basic Recording Checking the Recording Time Total time and recorded time are displayed on the TV screen after pressing [INFO]. One Touch Copy - DVD to VHS • If the DVD you are attempting to copy is copyprotected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. 1 Insert a Disc. To Pause the Recording 1 Press [PLAY/PAUSE] to pause the disc or tape during recording.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 48 Basic Recording One Touch Copy - VHS to DVD You can copy the contents of a VHS tape to a DVD±R or DVD±RW. This allows you to archive your old VHS tapes to DVD. 6 Press [VCR √√ DVD] again to start copying. 7 Stop the Copy Process. To stop copying at any time, press [STOP]. Copying will stop automatically when the VHS tape ends. If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 49 Timer Recording Timer Recording using Manual Record Screen The Timer Recording function allows you to record up to 16 programs within a period of one year. 1 Insert recordable media such as DVD±R, DVD±RW if you want to record to DVD. 2 Press [TIMER]. The ‘Timer List’ menu appears. • Date – Choose a date up to 1 year in advance. • Quality – Choose a Record mode. [DVD] HQ, SP, SEP or EP [VCR] SP, LP • Repeat-Choose frequency of the recording. Daily or Weekly.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 50 Timer Recording Cancelling a Timer Recording You can clear a Timer Recording any time before the recording actually starts. • Press [TIMER] on the remote control to display the Timer Record List. • Use […†] to select the program you want to erase on the Timer Recorder List, then press [GREEN] to cancel it.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 51 Timer Recording Timer Recording Troubleshooting 5 Press [RED] to record. The selected bar becomes red. It means that a timer recording is associated to that programme. Your recorder will automatically begin recording when the programme starts. 6 Press [RED] once more to edit the program. The Timer Record List will appear.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 52 Recording from an External Input Recording from External Components Recording from a Digital Camcorder You can record from an external component, such as a camcorder, VCR or Digital Camera, connected to any of the DVB-T VCR/DVD Recorder’s external inputs. You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVB-T VCR/DVD Recorder.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 53 Disc Playback and Editing This section explains edit functions for the entire disc and for the titles in the disc. This recorder offers various edit options for various disc types. Before you edit, check the disc type and select the option available for your disc. You may lose the edited contents if you remove the disc or a timer recording starts while editing. 1 2 Press [MENU] to go to ‘Main Menu’ menu.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 54 Disc Playback and Editing Protecting a DVD title Editing a DVD title If you want to protect a title from accidental recording, editing, or erasing, you can protect the title. Later, if you change your mind, you can unprotect the title. Renaming (Labeling) a Title Follow these instructions to rename a title list name,i.e., to edit the title of a recorded program. 1 Select the title to be protect using [œ √…†] and press [OK].
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 55 Disc Playback and Editing Editing a Title When you insert a DVD±R or DVD±RW disc already recorded by your VCR/DVD Recorder, you can edit the titles and chapters in a variety of ways. 1 2 Press [MENU] to go to ‘Main Menu’ menu. 3 Select the title to be edited using [… †] and press [OK]. 4 5 6 7 8 Select ‘Edit’ using [… †] . • Split Title may take several minutes.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 56 Disc Media Operation Usage of DISC OP button for Disc Media Operation For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Operation. The DVD±R DISC OP menu allows you to rename your disc or finalise it so it will be compatible with most other DVD players. The DVD±RW DISC OP menu allows you to erase, lock, or unlock your disc. You can also make it compatible with most other DVD players.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 57 Disc Media Operation 4 You can change the disc status by selecting ‘Yes‘ by using [œ/√] and press [OK]. The ‘Changing Disc Status’ bar will appear. This process takes a few seconds. 5 After the process is finished, the recorder goes to the ‘Information’ menu automatically. Edit Disc Name If ‘Lock Disc’ is set to ‘Yes’ in the DISC Operation menu, you cannot rename your disc; see page 56.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 58 Disc Media Operation Make Compatible 'Make Compatible' for a DVD+RW will automatically create a menu screen for navigating the disc. This function is accessible by pressing [DISC OP]. 1 2 Press [DISC OP] to go to ‘Disc Operation’ mode. 3 Use [œ/√] to select ‘Yes‘ and press [OK] to make the disc compatible. 4 After the process is finished, the recorder goes to the ‘Information’ menu automatically. Use [œ/√] to select ‘Make Compatible‘ menu for a DVD+RW.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 59 Troubleshooting Check the following guide for the possible cause of a problem before contacting customer support. Symptom Cause No power. The power cord is disconnected. No picture. The TV is not set to receive DVB-T VCR/DVD Recorder signal output. No sound. The video cable is not connected securely. The TV power is turned off. The equipment connected with the audio cable is not set to receive DVB-T VCR/DVD Recorder signal output.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 60 Troubleshooting Symptom Cannot record or did not record successfully. Timer Recording not possible. Stereo Audio Record and/or Playback not present. Remote control does not work properly. Cause Solution The remaining blank space on the disc is insufficient. The source you are trying to record is copy-protected. When setting the recording channel, the channel is tuned on your TV’s tuner. Clock in DVB-T VCR/DVD Recorder is not set to correct time.
DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 61 Technical Specifications General Power requirements Power consumption Dimensions(approx.) Mass (approx.) Operating temperature Operating humidity Signal system DVD Specifications 220–240V~, 50/60 Hz Operation: Maximum 29W Standby: 4.9W 430 x 92 x 312 mm (w x h x d) Net : 4.3kg Gross : 5.6kg 41°F to 95°F (5°C to 35°C) 5% to 90% PAL Colour Recording Recording formats Recordable discs Recordable time DVD Video Recording, DVDVIDEO DVD±R, DVD±RW [DVD] (Approx.
DTBC-MNF(or D)1NP-AG 2007.9.
SURNAME The information provided will be held on computer by the DAEWOO Registration Department of Domestic & General Insurance Co. Limited for the provision of warranty insurance or product related purposes. The information will not be disclosed to third parties, should you prefer not to receive product related details write to Domestic & General Insurance Co. Limited, on the address overleaf. DAE REG / 295 TODAY DATE OF PURCHASE TEAR OFF HERE AND RETURN MODEL No.
` 64 DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ DAEWOO GUARANTEE CONDITIONS This product is guaranteed for 12 months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge during this period by the dealer from whom you purchased the unit. The guarantee is subject to the following provisions. The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items such as batteries, drive belts or bulbs.