TV / DVD COMBO OWNER'S MANUAL Model: DTD-14H9
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS 1 Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2 Retain Instructions - The safety and operating instructions should be retained for future reference. 3 Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4 Follow Instructions - All operating and use instructions should be followed. 5 Cleaning - Unplug TV/DVD from the wall outlet before cleaning.
15 Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16 Object and Liquid Entry - Never push objects of any kind into this TV/DVD through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV/DVD.
IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock.
Table of Contents Before use .... DVD Operation .... IMPORTANT SAFEGUARDS 1 Table of Contents 4 Identification of Controls 5 Remote Control 7 Installation .... Basic Installation Connecting to Various Equipment 10 11 Basic TV operation ....
Identification of Controls Main Body (Front Part) Speaker Left Disc Loading Speaker Right Tray POWER button (Power of TV/DVD is fully intercepted.
Identification of Controls Main Body (Rear Part) POWER CORD SCART Jack CONNECTION to ANTENNA CABLE 6
Remote Control Remote Control Buttons POWER button If you press POWER button on remocon under the POWER button in the front part of TV/DVD, you can turn on/off the TV/DVD. DISPLAY button Operating status and GUI(Graphic User Interface) menu are displayed in a screen. TV/AV, DVD button You can select input mode. NORMAL button NORMAL I/ NORMAL II/ FAVOURITE picture control NUMBER button You can enter the relevant number directly or select a desired channel.
Remote Control DVD MENU button The DVD menu screen is displayed. AUDIO button You can select the desired audio language. SUBTITLE button You can select the desired subtitle language. DISC TRAY OPEN/CLOSE button SETUP button You can set the DVD player. REPEAT button You move into REPEAT mode whenever you press this button. A-B REPEAT button You can play the given sections repeatedly. TITLE/PBC button You can select the desired title. Angle button You can select the desired screen angle.
Basic Installation Connecting the Antenna Cable Outdoor antenna or wall antenna outlet If TV picture is not clear, it usually result from the wrong antenna connection. Please install the antenna in the proper place and in the right direction. Connecting a SCART SOCKET This connection is used to connect this player to an external device (VCR, CAMCORDER, DVD) and to be displayed in TV/DVD. If the peripheral is powered on in TV mode, some peripherals are converted into AV mode automatically and displayed.
Connecting to Various Equipment Connecting to a Camcorder or Other Video Player Connection with SCART Jack (AV) Connect the SCART jack of your video player (or camcorder) to SCART terminal of TV/DVD with SCART jack.
Watching TV 13 1 2 To turn on the TV, press the [ON/OFF] button in the front 3 4 Adjusting the Volume. part of the set. Now TV set is in STANDBY status. Then, press the power button on the remote control. Selecting the Channel. Press the PR [ , ] button or [Number] button to select the desired channel. If input status is set to AV or DVD, press the [TV/AV/DVD] button to select TV. Press the [ VOL] button to decrease the volume level or [VOL increase the volume level.
TELETEXT SWITCHING TELETEXT ON/OFF Press the TELETEXT button ( ). The index page viewed last will appear. Press the TELETEXT button to return to the TV mode. COLOUR BUTTONS IN TELETEXT A red, green, yellow and cyan field is shown at the bottom of the screen.If FASTEXT is transmitted by the station, by pressing the corresponding cursor button on the remote controller you can easily select the desired page . SELECTING PAGES The NUMBER buttons 0...9 are used to enter a page number.
Setting TV To Display the Setting Screen 1 Press the [TV MENU] button in TV mode. PICTURE SOUND TV setting menu is displayed. INSTALL FEATURES Position MENU Exit 2 Press the [ , OK Access ] button to select the desired item. Current settings and variable settings for the desired item are displayed in the screen. • PICTURE • SOUND • INSTALL • FEATURES 15 3 Press the [OK] button and press the [ 4 Press the [TV MENU] button to exit the current setting menu.
Setting TV Setting Picture 1 Press the [ , ] button in TV setting screen to select “PICTURE” and press the [OK] button. Setting menu is displayed. PICTURE BRIGHTNESS CONTRAST COLOUR SHARPNESS Position MENU Exit 2 Adjust Press the [ , ] button to select the desired item, then press the [ , ] button to set the desired item. Current settings and variable settings for the desired item are displayed in the screen. • BRIGHTNESS: Adjust the picture until correct brightness is obtained.
Setting TV Setting Sound 1 Press the [ , ] button in TV setting screen to select “SOUND”, then press the [OK] button. Setting menu is displayed. SOUND VOLUME BALANCE BASS TREBLE EFFECTS MONO Position MENU Exit 2 Press the [ , ] button to select the desired item, then press the [ , ] button to set the desired item. Current settings and variable settings for the desired item are displayed on the screen.
Setting TV 4 Setting SYSTEM Press the [ ] button in the INSTALL screen to select “SYSTEM” if the Select a TV broadcasting type among EURO, E/EURO, FRANCE, and GB with [ 5 , automatic tuning did not already select this correct system. , ] button while the cursor points to SYSTEM. Setting CHANNEL Press the [ , INSTALL ] button in the INSTALL screen ATSS EDIT SYSTEM CHANNEL FREQUENCY NAME PROGRAM STORE TO to select “CHANNEL”.
Setting TV 8 Setting PROGRAM Press the [ , ] button in the INSTALL screen to select “PROGRAM”. Press the [ , ] button to set the desired PR while the cursor points to PROGRAM. Whilst doing this channel as well as STORE TO INSTALL ATSS EDIT SYSTEM CHANNEL FREQUENCY NAME PROGRAM STORE TO GB EURO C 05 175.25 ---03 03 Position MENU Exit Adjust 0...9 Adjust are also changing.
Setting TV Setting Other Features 1 Press the [ , ] button in the TV FEATURES setting screen to select “FEATURES” LANGUAGE GB CHILD LOCK ON and press the [OK] button. CLOCK --:-- WAKE TIME 11:43 WAKE PR Setting menu is displayed. NR 09 OFF Position MENU Exit 2 Press the [ the [ , , Adjust ] button to select the desired item and press ] button to set the item. Current settings and variable settings for the desired item are displayed in the screen.
Advantages of This Product Are.....
Playing the DVD Video Disc Basic Playback If no button is pressed within 5 minutes after the opening of the tray, it will automatically close in order to prevent damage 23 1 2 3 4 Press [ 5 To stop, press [ ] button. ] button to power on. Press the [OPEN/CLOSE] button to open disc tray. Place a disc accurately within the disc tray, ensuring that the label is facing upwards. Insert the disc and press [OPEN/CLOSE] button to close the tray.
Playing a desired scene To skip scenes in a disc 1 2 To move to next chapter (or track), press [NEXT ] button. The current chapter (or track) moves to the next chapter (or track). Press [PREV ] button. The current scene moves to the previous chapter (or track) or first scene of current chapter (or track). Directly moving to a desired title Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on it, the [TITLE] button can be used to select the movie title.
Playing a desired scene Playing a Programmed order 1 While STOP or Playback, press PROGRAM [PROGRAM] button. While the right figure is appearing, please input desired Title(T) and Chapter(C) number with NUMBER buttons. * In case of VCD and CD, please input TRACK Number. 2 TITLE CHAP. SEL. 00 000 1-54 TITLE CHAP. TITLE CHAP.
Playing a desired scene Repeating a defined period from A to B You may repeat a defined period from A to B 1 2 3 At the point where you want to start the repeat playback, press [A - B] button. A- The right figure appears and repeat playback start position (A) is set. At the point where you want to end the repeat playback, press [A - B] button again. A-B The repeat playback end position (B) is set and a defined period from A to B is playback repeatedly.
Playing a desired scene Searching VCD, CD and MP3 with a track or track time 1 If you want to search for a particular track, press [SEARCH] button once. T In the case of PBC OFF, a screen as shown to the right will appear showing the current and total track numbers. Please enter the required track number using the number buttons on the remote control. * If PBC is on, entering the track number will default the unit’s PBC to off.
Confirming the current PLAY mode on screen Confirming the current DVD disc mode 1 During play, press [DISPLAY] button. This will display the current disc mode. If you want to change any of the modes displayed, select the item using the up/ down cursors and choose the new setting using either the [ ] or [ ] button or the numeric buttons on the remote control. On completion, press [ENTER] button. Exit from this Display mode by pressing the [DISPLAY] button.
Confirming the current PLAY mode on screen Confirming the current VCD disc mode 1 During play, press [DISPLAY] button. This will display the current disc mode. If you want to change any of the modes displayed, select the item using the up/ down cursors and choose the new setting using either the [ ] or [ ] button or the numeric buttons on the remote control. On completion, press [ENTER] button.
AUDIO language, SUBTITLE language and 3D AUDIO The user may select the audio track or the subtitle language if the disc supports this multi-language function. Selecting an audio language 1 Keep pressing [ ] button until the user’s preferred language appears in playback mode. If that particular DVD disc includes this audio information, the user can press [ ] button to scroll through the available languages.
ZOOM and Multi Angle Using a zoom function The user can enlarge the current screen by either 2 or 4 times. 1 Keep pressing [ZOOM] button until the preferred zoom appears. Every time the user presses [ZOOM] button, the magnification changes : 2 times (X2) ---> 4 times (X4) ---> OFF ---> 2 times (X2) ---> ... in rotation. The center of the screen is taken as the base point for the enlargement. It is impossible to change this point using the [ , , , ] button on the remote control.
About MP3 and JPEG discs Playing a disc containing MP3, JPEG files This unit will play MP3, JPEG files recorded on CD-R and CD-RW discs. 1 Turn on your television and select the channel assigned to this DVD player. Press the DVD [OPEN/CLOSE] button, to open the disc tray. Place the disc containing MPS, JPEG files on the disc tray with the label facing upwards. Press the DVD open [OPEN/CLOSE] button, to close the disc tray.
Confirming the current PLAY mode on screen 6 Select the file to listen to (or view). Move the cursor to the desired file which you want to listen to (or view) by pressing [ , , , ] button and press [ENTER] button to confirm. The selected filed will play back. * To exit the directory screen press [MENU] button in playback or stop mode. Press [MENU] button to make it reappear. D I SC: \ D I R- - 0 1 ..
Displaying menus in a disc To display menus in a disc If a disc includes menus, the user may use them. 1 2 Press [TITLE/PBC] or [DVD/MENU] button. • This will show the available menus held on the disc, which will differ between formats. (“Return” will appear on the OSD with VCD2.0) • If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button. * CD and VCD1.1 do not support the function.
Language setup The user can set the language of menus in a disc, audio and subtitle. 1 Press [SETUP] button when the DVD player is either in the STOP or the Resume STOP mode. LANGUAGE OSD LANGUAGE AUDIO SUBTITLE DISC MENU MOVE : If a disc does not include this language setting information, this function will not be 2 Selecting a OSD LANGUAGE. 3 Selecting AUDIO LANGUAGE. 4 Selecting SUBTITLE LANGUAGE. 5 Selecting DISC MENU LANGUAGE. available.
Video setup A user can set up a connected TV condition and screen. 1 Press [SETUP] button when the DVD LANGUAGE player is either in the STOP or the TV ASPECT AUDIO OTHERS 4:3 PS Resume STOP mode. MOVE : 2 VIDEO SELECT:ENTER EXIT:SETUP Selecting TV ASPECT. Every time the user presses [ENTER] button, TV ASPECT changes 4:3 LB ---> 16:9 WIDE ---> 4:3 PS ---> ... in rotation.
Others Setup • If password is wrong, “WRONG PASSWORD” appears instead of “CHANGE PASSWORD”. • The default password is “3308” : you may enter this password if your chosen one has been lost or forgotten. 1 2 3 4 Press [SETUP] button when the DVD 5 Selecting PARENTAL. Resume STOP mode. LANGUAGE VIDEO OSD SCREEN SAVER DEFAULTS PARENTAL AUDIO OTHERS ON ON RESET 8 ADULT Selecting OSD. Select “ON” to allow OSD (On Screen Display) to be displayed on the TV.
About DVD Terms related with DVD DVD A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc) can include 135 minutes of video information. And for audio, it can hold up to 8 kinds of languages and 32 kinds of subtitle languages. By using MPEG-2 video compression and digital 3D surround sound, DVD realizes high definition images and quality sound similar to that found in a movie theatre. CDDA A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used.
About DVD Discs The safe keeping of discs • To keep a disc in clean condition, please do not touch the side containing play information. • Do not attach a bit of paper or sticky tape on it. • Do not expose a disc to a direct sunlight or electric heating systems. • After using it, please keep the disc in a case. Cleaning a disc • Please rub gently, from the center outwards, with clean cloth. • Do not use thinner, benzol (benzene), commercial cleaning goods or antistatic sprays.
Before suspecting fauls with the DVD Symptom 41 Checks • The recorder does not play. If a DVD is from overseas, it may not be played. Please check a DVD’s region code whether it has the relative region 2 or All. Please check whether a DVD is inserted in a right directing. This unit does not support CD-ROM or DVD-ROM playback. • No sound comes through.
Before Calling Service Personnel Symptoms Correction • Colour is not displayed and net pattern is displayed on the specific channel. Check the external antenna and cable TV conditions. Check whether you select the correct channel. • Vertical and horizontal line and net pattern are displayed on the screen in a moment. Vibration is also displayed. Check the interference wave caused by car, neon sign, and high frequency. Check the strong interference radio wave from wave of other devices or radio station.
Specifications Model Input band and system DTD-14H9 VHF-L E2~S7/E2~S8(EXCEPT UK) VHF-H S8~S36/S9~S38(EXCEPT UK) UHF S37~E69/S39~E69 UK MODEL : PAL-I/II TV-STANDARD CONTINENTAL : PAL, SECAM-BG/DK FRANCE MODEL : PAL, SECAM-BG/DK SECAM-L/L SPEAKER RMS OUTPUT 1.5W + 1.5W (FM 60% Mod.) (60% mod.
