Owner's Manual

13
Can be used to delay the washer start time from 1 hour to 12 hours.
To customize a Program.(memorize frequently used program)
1. Select a cycle.(’18:88’or’CEP’will be shown by turns)
2. Select Wash/Rinse Temperature, Spin Speed, and Soil Level.
3. Select other desired Options.
4. Press Start/Pause Button.
Adds time to the wash cycle for better stain removal.
This option provides an additional rinse cycle.
Use this option to ensure the removal of detergent or bleach residue from garments.
Use this option to rinse and then spin.
Use this option to supply bleach during the wash cycle.
Setting Child Lock feature.
During any cycle you can engage the Child Lock feature by holding down the BEEPER button for
3 seconds.
When successfully set the Child Lock indicator will light.
When in Child Lock Mode no buttons are functional, except for the Power Button.
To disengage Child Lock press and hold down the beeper button for 3 seconds.
*The Child Lock will be cancelled when power is off.
Use this option to raise the temperature of water instead of using the internal heater.
If using this option, heater does not operate.
Steam option features :
• For tough stained clothes, underwear, or baby clothes.
• Steam is available with Sanitary, Bulky/Large, Perm.Press,Cotton/Normal, and Baby Wear cycles.
• Upgraded washing performance with low energy and water consumption.
• Do not load delicates such as wool, silk, and easily discolored clothes.
Note :
• Steam wash is highly concentrated and efficient.It may seem there is no water inside the drum, but
this is normal.
• Steam spray may not be seen clearly through the door; however, the washer is spraying steam
strongly inside.
• During the steam operation, a spraying sound will be heard.This is not a malfunction.
→ → →
Change
the desired
program
Do not reach into the washer while operating.Steam can cause severe burns.