Owner's Manual

■ Level floor

• Allowable slope under entire washer is 1°.

• To minimize noise and vibration, the washer

MUST be installed on a solidly constructed

floor.

• Carpeting and soft tile surfaces are not

recommended.

• Never install the washer on a platform or weakly

supported structure

NOTE: A firm, solid floor is even more critical to a

front-loading washer than to a top-loader.

If your floor is wood and/or frame

construction, you may need to reinforce it.

Front-loaders use substantially faster spin

speeds than top-loaders, causing greater

vibration. If the floor is not solid, your washe

will vibrate. You will hear and feel the

vibration throughout your house.

■ Power outlet

• Must be within 60 in. (1.5 m) of either side of the

washer. Do not overload the outlet with more than

one appliance.

• Time-delay fuse or circuit breaker is

recommended.

NOTE: It is the personal responsibility and

obligation of the customer to have a proper

outlet installed by a qualified electrician.

31.8"

(80.9cm)

(2.5 cm)

[Side view]