User's Manual

Before Asking for Service

■ Before Asking for Service, please check each item below if you have trouble with your cleaner.

Problem Check Point Measure

Suction power is weak.

The cleaner does not work.

Power cord does not rewind.

When the dust bag is full or

blocked or any of the

accessories is blocked, the

over-heating protection for the

motor is activated.

• Dust bag

• Pipe or hose

• Power cord

• Suction hose

• Power cord

If dust bag is dirty, clean it.

If clogged or blocked, remove the object.

Check if power cord is plugged.

Check if hose is attached fimly into suction hole.

Pull the power cord out a little and press the

cord rewind button.

Switch off and unplug the cleaner and check

the dust bag, accessories and blockages,

then allow the motor to cool down. The

cleaner can be switched on again about 30

minutes.