User guide

● Push the RELEASE PEDAL and rotate the BODY as below the
p
icture.
- Set HOSE GUIDE on the top of the cleaner
- Causion : If the power switch is not ON, though the brush switch is ON the NOZZLE is not work.
If this cleaner is not in the using state, though the power and the brush switch are ON,
the NOZZLE is not work because of the safty device(NOZZLE SAFTY SWITCH).
UPRIGHT USING STATE
CONVERTING TO CANISTER TYPE
NOZZLE
BODY
Release
Pedal
Nozzle Safty
Switch
● Disassemble the NOZZLE and the HANDLE. ( See. Page 3 )
● Disassemble the Nozzle side of the HOSE end and connect it with HADLE as below
● Assemble the PEDAL BRUSH in the pipe end fo HADLE
● Extend the PIPE with the Pipe Extension Button for the convienient.
Using Guide & Converting to Canister Type
Pipe Extension
Button
HANDLE
HOSE
PEDAL BRUSH