DVD-VIDEO PLAYER Owner’s Manual Manual Owner’s SD-9500P/SD-9800P/SD-3500P - Region code of DVD/Video player for UK is region “2” or ALL. Inserting a disc with another region code, it will not operate. Please only use a disc with region code 2 or ALL. is a ‘DO NOT’ mark. If this mark is displayed in operating the product, please wait for a while, then use it. If " DO NOT" mark continues to be displayed in pressing a button after that, it means the button does not function in the currently played disc.
Product information Contents Product Information DVD Operation Important Safeguards ..................................................... 2 Advantages of This Product Are .... ............................ 5 Read Carefully before Using ......................................... 6 Identification of Controls ............................................... 7 Remote Control .............................................................. 11 Playing a desired scene ...............................................
Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Product information Important Safeguards This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorised and does not contain any parts that can be repaired by the user. 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated.
Important Safeguards 12 LIGHTNING For added protection for this unit during a lightning storm, or when the unit is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 13 DISC TRAY Keep your fingers well clear of the disc tray as it is closing.
Product information Advantages of This Product Are .....
Read Carefully before Using Cautions in use of DVD-Video player are described below. Please read carefully before using a DVD-Video player. ✔ Checking and Replacement of Antenna • The antenna is subject to change in its direction or damage by wind and rain. For a clear picture, ✔ Installation place and handling contact and consult your nearest aerial rigger • When you place this player near other devices, about checking and replacement. they may affect poorly together.
Product information Identification of Controls Main body (front panel) ! @ # STANDBY/ON ■ SD-9500P VIDEO L AUDIO R EJECT REC - CHANNEL + SELECT STOP $ % ^ & * ! ■ ( @ REW PLAY/PAUSE FF OPEN/CLOSE ) 1 234 5 # SD-9800P $ % ^& * ( ! POWER (STANDBY/ON) button Use to power the device on/off if AC power supply is connected.
Identification of Controls Operation Display Window VCR Operation REC and TIMER REC display Recording , TIMER Recording , To be Timer-recorded, To be Timer-recorded state ERROR (No Tape or Tape without tab) dts Disc Indicator Title This is displayed when playing a VCD and CD disc. Chapter This is displayed when playing a DVD disc.
Product information Identification of Controls Main body (Rear Panel) ! @ * ! POWER CORD Connect to outlet in a wall. #$ ^ % & & Connection to TV * EURO AV1 Jack @ EURO AV2/DECODER Jack # VIDEO OUTPUT Jack $ AUDIO OUTPUT Jack % DIGITAL OUTPUT (OPTICAL/COAXIAL) Jack To enjoy theatre sound quality in the home, connect this jack with amp or unit embedded with digital audio decoder.
Identification of Controls Accessories remote control 2 Batteries RF cable Owner’s Manual/ Warranty OPE TITL N/CL VCR E/PB OSE MEN C U DVD DIS PR + PLA Y INP UT SETU ENT ER P OK REP EAT A-B PR SUB PRE V. CLEAR/3D TITL E PLA Y/PA AUD IO USE NEX T PRO GRA M CLK /CN T REC ZOO M TV/V SEA RCH CR ANG LE/S TRA PEE CKI D NG SYS TEM • To purchase accessories or not supplied additional parts, contact your nearest dealer or service centre. N.B.
Product information Remote Control ! [DVD] MENU button @ POWER button ! 6 # [DVD] TITLE /PBC button (“PBC” means Play Back Control menu.
Setting up your player ■ Before you start, unplug all the equipment from the mains supply. (Option 1) - Connecting your player through RF lead Television 230V~, 50/60 Hz Back view of your player Aerial The type of aerial you should use, depends on local interference and how far you are from the transmitter. You should contact a local retailer if you have any questions about your aerial.
Connecting your player through extra equipment (satellite system) ■ Before you start, unplug all the equipment from the mains supply. Connections (Option 1) - Connecting your player through RF lead Television 230V~, 50/60 Hz Aerial Back view of your player Satellite You can also use this scarted connection if your player has two scart sockets. This will improve sound and picture quality when you are recording from a satellite.
Connecting your player to the Hi-Fi system ■ Before you start, unplug all the equipment from the mains supply. Option 1 Television Aerial Hi-Fi Plug a phono cable into the “Audio L/R” sockets on the back panel and into the audio sockets on any audio amplifier, if needed. If your amplifier does not have this connection, see page 16. 230V~, 50/60 Hz Player You can also use a scart lead to improve picture and sound quality from your player.
To make VCR tape to tape recordings ■ Before you start, unplug all the equipment from the mains supply. How to connect Connections First player 230V~, 50/60 Hz connect a scart lead from player to second VCR Second VCR 1) Insert the tape you wish to record on into the first player and press [INPUT] until “AV1” appears on the front display. 2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player. 3) Press the [RECORD] button on the first player.
Connecting Dolby Digital Amp with Digital Audio Out Jack How to connect REAR PANEL OF DVD-VIDEO CONNECTING CABLE (Not supplied) (L) AUDIO IN (R) Home Theater Receiver with Dolby Digital decoding capability 1 Select either COAXIAL or OPTICAL to connect to a Dolby Digital Amplifier. ** If you want to know about “Dolby Digital”, please refer to [About DVD] in 49-50p. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
2nd scart socket 2nd scart socket If your video has a 2nd scart socket, as shown in the diagram below, you can connect other equipment as seen on pages 13-15. Connections 2nd scart INPUT ONLY INPUT+OUTPUT When connecting other equipment please refer to their manuals for further information. This video manual recommends the set up as shown on page 13.
Initial Installation ■ Switch the TV on. ■ You can also start "AUTO SET" in the SETUP "PR PRESET" "AUTO SET". ■ To tune in new stations (manual tuning) and enter station names see page 25-26. Setting up the player 1 You should see this picture the first time you switch on the TV and player. AUTO SET OK:CONFIRM 2 OK for "AUTO SET!". "AUTO SET" tunes in all the stations you can receive in your country and sorts them in an order common for your country. Clock is automatically set.
Setting time and date / Auto clock Setting time and date ■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure below. 1 Call the player’s "SETUP", choose "VCR SETUP", then "CLOCK SET". CLOCK SET TIME - - : - DATE - - / - - /- - - 0-9:SETUP (HOUR) :CORRECT SETUP:END Move to the position you want to change and type in the new values. Wait a few seconds after typing a one-digit number.
OSD ON & OFF OSD (On Screen Display) ON & OFF This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it to OFF mode. 1 SETUP Call the player’s "SETUP". TIMER PROGRAM PR PRESET VCR SETUP TAPE CONTROL PR+/-:SELECT OK:CONFIRM 2 3 Choose “VCR SETUP”. And press the [OK] button. Select “OSD ON/OFF”. If you want OSD OFF mode, select it and press [OK] button to confirm. Then OSD characters are not displayed in the normal picture.
DVD Playback 1 Press [ ] button to power on. Press [DVD] button of REMOTE to select DVD mode. VCR DVD MENU DISPLAY TITLE/PBC OPEN/CLOSE INPUT PR + 2 Press [OPEN/CLOSE] button to open the disc tray. Place a disc firmly on the disc tray, ensuring the disc’s label is uppermost. ENTER OK SE TU P D R/3 EA CL PR REPEAT A-B AUDIO SUBTITLE PREV.
VCR Playback 1 Press [ ] button to power on. Press [VCR] button of remote control to change into VCR mode. VCR DVD MENU DISPLAY TITLE/PBC OPEN/CLOSE INPUT PR + 2 Insert the desired tape. ENTER OK SE TU P D R/3 EA CL PR REPEAT A-B AUDIO SUBTITLE PREV. NEXT PLAY/PAUSE PROGRAM SEARCH CLK/CNT REC TV/VCR ZOOM ANGLE/SPEED 3 4 TRACKING If you want to playback, press [PLAY/PAUSE] button. When the operational status is flickering, adjust [TRACKING +/-] button.
Recording To Record With VCR VCR DVD MENU 1 Press [ ] button to power on. • Press [VCR] button of remote control to change into VCR mode. DISPLAY TITLE/PBC OPEN/CLOSE INPUT PR + ENTER OK SE TU P EA D R/3 CL PR REPEAT A-B AUDIO SUBTITLE PREV. 2 Insert a recordable tape. Insert a tape with recording tab.
Recording To Copy From DVD To Videotape 1 2 3 Insert the desired DVD disc. When the DVD disc is copyright protected, you can’t copy it. If DVD disc is not copy protected then insert a blank tape. Press [REC] button during playing of DVD. DVD plays and VCR starts recording. If you press STOP [ ] button in DVD mode, DVD and VCR will stop at the same time. If you press STOP [ ] button in VCR mode, VCR stops to record and DVD continues to play. N.B.
Tuning in New Stations ■ The TV and player are switched on. ■ To see the picture from your player, press the station button on the TV reserved for player input or the AV (Audio / Video) button. ■ "AV1/2" should not be selected with the AV button on the player. Tuning 1 To complete the set-up of your video recorder when the auto set has not stored all of the channels or when you wish to store a new channel. Call the video’s "SETUP", choose "PR PRESET".
Tuning in New Stations Station names ■ If your player is showing no station name or is showing a station name incorrectly, you can correct this. 1 2 Call this menu (just see the previous page), if it isn't displayed. Select NAME position. Press the [0] button to change the given name. Or press the [1] button to create the station name. Either select the name from the stored list or create the station name and enter a 4-digit name.
Timer Recording ■ For timer recordings, clock, date, and stations must be set correctly. ■ Load a cassette with its safety tab in place and with sufficient free space for the recording. Timer recording using VideoPlus (SD-9500P&SD-9800P only) 1 Call the VideoPlus menu by pressing PROGRAM on the remote control. From your TV magazine, type in the number next to the programme you want to record ... ... and confirm. Decide if you want to record "ONCE", "WEEKLY" or "DAILY"... 2 ... and confirm.
Timer Recording ■ For timer recordings, clock, date, and stations must be set correctly. ■ Load a cassette with its safety tab in place and with sufficient free space for the recording. Normal timer recording 1 2 3 Call the player’s "SETUP", choose "TIMER PROGRAM". Decide if you want to record "ONCE", "WEEKLY" or "DAILY"... ... and confirm.
Timer Recording Timer Review – changing and erasing 1 Call the player’s "SETUP", choose "TIMER PROGRAM". TIMER PROGRAM PR 03 START END DATE 21:20 22:20 14/06 01 ------- 18:10 -- : --- : --- : --- : --- : --- : -- PR+/-:SELECT OK:CONFIRM 2 13/06 -- / --- / --- / --- / --- / --- / -- SETUP:END TIMER PROGRAM (ONCE) PR 03 START TIME 21:20 END TIME 22:20 START DATE 14/06(SAT) TAPE SPEED SP VPS/PDC ON 0 :ERASE :CORRECT SETUP:END VCR Operation Select the programming to change or erase.
More Functions ■ The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape. ■ If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15). Clock / counter display Each time you press [DISPLAY] button, Press 1x: Time and date+current status Time and date Press 2x: Counter+current status counter Press 3x: disappear.
More Functions 16 : 9 Wide Screen Format Playing back / Recording You can play and record the program of 16:9 Wide-Screen format with this player . • 16:9 Set -Auto : This video automatically detects the program format (16:9 or 4:3) and records or plays this program in the same format. -ON : The video will play or record all broadcasts in 16:9 format. 4:3 broadcasts will be converted to 16:9 format. -OFF : The video will play or record all broadcasts in 4:3 format only.
More Functions ■ The player records the complete sound signal transmitted by the TV station. ■ On the mono VCR, you will hear the normal mono sound. The Hi-Fi system (SD-9500P&SD-9800P only) In addition to the normal mono sound track of VHS video recorders, your player is equipped with a highquality Hi-Fi sound system.
Connections and Copying ■ If you are using a SCART cable, select the AV input on the TV to see the picture from the player. ■ If you are not using a SCART cable, select the programme number on the TV reserved for video input to see the picture from the player. To the TV via antenna cable (if you are not using a SCART cable) If you are not using a SCART cable, your player can transmit pictures and sound to the TV via the coax aerial cable.
Connections and Copying ■ Switch off all components when connecting or disconnecting cables. Copying To copy to your player from another video machine, connect the two machines with a cable between their EURO AV (SCART) sockets and select as programme "AV 1/AV 2" or “F. AV” (front sockets) using the [AV], [PR+/-] or [INPUT] button. Set the other video machine to playback and your machine to record. •To connect a mono audio source, use the front Audio In socket marked L.
Playing a desired scene To skip scenes in a disc To move to next chapter (or track), press [ NEXT] button. The current chapter (or track) moves to the next chapter (or track). Press [ PREV] button. The current scene moves to the previous chapter (or track) or first scene of current chapter (or track). Directly moving to a desired title ■ Some movie discs may contain multiple titles. If the disc has a movie title menu recorded on it, the [TITLE/PBC] or [MENU] button can be used to select the movie title.
Playing desired scene Playing a programmed order While in STOP or Playback, press [PROGRAM] button. 1 PROGRAM While the figure highlighted is appearing, please input the desired Title and Chapter number with NUMBER buttons. Press [ENTER] to memorize. Then input next number. To cancel, move the cursor to the desired parts and press [CLEAR] button. TITLE CHAPT SEL. 000 1-54 00 TITLE CHAPT TITLE CHAPT 01 - - - - 06 - --02 - - - - 07 - --03 - - - - 08 - --04 - - - - 09 - --05 - - - - 10 - --PRG.
Playing desired scene Repeating a defined period from A to B ■ You may repeat a defined period from A to B. A MP3 disc may not be repeated from A to B. 1 2 3 At the point where you want to start the repeat playback, press [A-B] button. The figure on the right appears and repeat playback start position (A) is set. A- At the point where you want to end the repeat playback, press [A-B] button again. A-B The repeat playback end position (B) is set and a defined period from A to B is playback repeatedly.
Playing a desired scene Searching VCD, CD and MP3 with a track or track time T 001/013 ➟ If PBC is OFF, the screen will be like the figure on the right. It shows current and total track numbers. Please enter the new track number to be searched using the [NUMBER] button. current track number ➟ 1 If you want to search with a track number, press [SEARCH] button one time. total track number * If PBC is ON, pressing track number converts PBC to OFF mode automatically.
Confirming the current PLAY mode on screen Confirming the current DVD disc mode While in PLAY mode, press the [DISPLAY] button. It shows the current disc mode. If you want to change the mode, select the item with up/down cursor and enter the new settings with [number], [<] or [>] button. In completing entering, press [ENTER] button. To exit from Display mode, press [DISPLAY] button again.
Confirming the current PLAY mode on screen Confirming the current VCD, CD, MP3, JPEG disc mode While in PLAY mode, press the [DISPLAY] button. It shows the current disc mode. If you want to change the mode, select the item with up/down cursor and enter the new settings with [number], [<] or [>] button. In completing entering, press [ENTER] button. To exit from Display mode, press [DISPLAY] button again.
Selecting an AUDIO language, SUBTITLE language and 3D AUDIO Selecting an audio language ■ The user may select an audio language and subtitle language if a disc includes Multi-language. Keep pressing [AUDIO] button till the user’s preferred language appears in playback mode. If DVD disc includes audio information, every time the user presses [AUDIO] button, English (ENG), French (FRE), Spanish (SPA) and others appear one by one.
Selecting ZOOM and Multi Angle Using a zoom function ■ The user can enlarge the current screen about 2 or 4 times. • For the case of SVCD and VCD, only 2 times Zoom is available. • During 4 time zoom, subtitle language can’t be seen. Keep pressing the [ZOOM] button till the preferred zoom appears. Every time the user presses the [ZOOM] button, the zoom magnification changes 2 times (X2) 4 times (X4) OFF 2 times (X2) ... one by one.
About MP3, JPEG discs Playing a disc containing MP3, JPEG files This unit will play MP3, JPEG files recorded on CD-R and CD-RW discs. 1 Turn on your television and select the channel assigned to this DVD player. Press the DVD open [OPEN/CLOSE] button, the disc tray opens. Put a disc containing MP3, JPEG files on the disc tray with the label side up. Press the DVD open [OPEN/CLOSE] button, the disc tray closes. The unit will take a short while to load the disc and display the directory structure.
About MP3, JPEG discs 6 Select the file to listen to (or view). Move the cursor to desired file which you want to listen to (or view) by pressing [ ] button and press [ENTER] button to confirm. The selected file will be playback. * To disappear the directory screen, press [MENU] button in playback or stop mode. Press [MENU] button again to make it appear. DISC: \DIR--01 ..
Displaying menus in a disc To display menus in a disc ■ If a disc includes menus, the user may use them. 1 Press the [MENU] button. • If playing a DVD disc, it shows menus in the disc. Also they are different according to discs. (“Return” will appear on the OSD with VCD2.0.) • If it is a VCD2.0, select PBC ON mode by pressing [TITLE/PBC] button. * CD and VCD1.1 do not support the function.
Language Setup ■ A user can set OSD language, Audio, Subtitle and Disc Menu. 1 “OSD” means “On Screen Display”. 2 While in STOP or RESUME STOP mode, press the [SETUP] button. LANGUAGE VIDEO OSD LANGUAGE AUDIO SUBTITLE DISC MENU Selecting a OSD language. Please select a language to be displayed on DVD screen. MOVE œ √†… AUDIO OTHERS ENGLISH ENGLISH ENGLISH ENGLISH SELECT:ENTER EXIT: SETUP Every time the user presses [ENTER] button, OSD LANGUAGE changes ENGLISH FRANCAIS ... one by one.
Video Setup ■ A user can set up a connected TV condition and screen. 1 2 While in STOP or RESUME STOP mode, press the [SETUP] button. LANGUAGE VIDEO TV ASPECT Selecting TV Aspect. Every time the user presses the [ENTER] button, TV ASPECT changes 4:3 LB 16:9 WIDE 4:3 PS ... one by one. MOVE œ √†… AUDIO OTHERS 4:3 LB SELECT:ENTER EXIT: SETUP If a user selects “4:3 PS”, the user can watch only a centre of the original scene of “16:9”.
Other Setups 1 2 3 4 The initial password is 3308. In case you forget newly-input password, you can use 3308 as a password. 5 Select character display window. Select "On" to make OSD(On Screen Display) language display on screen. VIDEO OSD SCREEN SAVER DEFAULTS PARENTAL MOVE œ √†… AUDIO OTHERS ON ON RESET 8 ADULT SELECT:ENTER EXIT: SETUP Select defaults. If you select defaults, every function set returns to FACTORY Defaults except Parental. Select Parental.
About DVD Playable Disc • DVD, Video CD(Version 1.1, 2.0), S-VCD and Audio CD Disc type DVD Playable Possible Restriction Region number 2 or Region number All Video CD CD Possible Possible Version 1.0/1.1/2.
About DVD CHAPTER It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of which a track is called as a chapter. A certain scene of a recording can be quickly searched with the chapter number. TITLE It means the information recorded in a DVD. A DVD can be divided into may titles. TRACK It means the information recorded in a video CD and an audio CD. A disc consists of many a track, for which a user can search a certain position. dts Digital Theatre System is a 5.
Basic information about VCR and Videotape Terms related with VCR AFT Automatic fine tuning, a circuit that automatically adjusts TV reception to optimum condition. CABLE Cable television. Index Search A feature of this VCR that automatically records an index each time recording begins. It helps you locate a particular segment of the tape quickly and easily. LP Long Play, an intermediate tape recording speed that combines most of the picture/audio quality obtainable at the standard recording speed.
Before suspecting a fault (VCR) Symptom Checks • “Power On” does not work. ➤ Please check whether the power plug is inserted in an electric outlet. • It does not work even in “Power On”. ➤ ➤ Please check whether a videotape is inserted in. Try to insert the plug again. • A videotape is not inputted in. ➤ ➤ ➤ Please check whether a power plug is inserted in an electric outlet. Please check whether a videotape is in.
Before suspecting a fault (VCR) Symptom • Recording a TV program is impossible. Checks ➤ ➤ ➤ ➤ ➤ ➤ • Once pressing “REC”, a videotape is ejected automatically. ➤ ➤ ➤ ➤ For recording, you should use a videotape with a tab. Please check whether a channel is fixed on video. If not, you have to turn it into “TV” by pressing “INPUT” button. Please check whether the timer recording info is right.
Before suspecting a fault (DVD) Symptom • The recorder does not play. Checks ➤ ➤ ➤ • No sound comes through. ➤ If a DVD is from overseas, it may not be played. Please check a DVD’s region code whether it has the relative region code 2 or All. Please check whether a DVD is inserted in the right direction. If it is a CD-ROM for PC or DVD-ROM, it does not work.
Specifications Power 230V~, 50/60Hz Consumed electricity Hi-Fi : 26W, Mono : 25W Weight 4.6kg Dimension (W x H x D) 435mmx93mmx255mm Operative temperature +5°C~40°C Installation condition Horizontal / Relative humidity under 80% Signal type PAL COLOR Antenna Input/output U/V-mixed: 75Ω unbalanced VIDEO input 1.0Vp-p (unbalanced, RCA JACK) AUDIO input -8.8dBm, RCA JACK VIDEO output (common use of DVD and VCR) VIDEO output terminal, 1.
SURNAME The information provided will be held on computer by the DAEWOO Registration Department of Domestic & General Insurance Co. Limited for the provision of warranty insurance or product related purposes. The information will not be disclosed to third parties, should you prefer not to receive product related details writes to Domestic & General Insurance Co. Limited, on the address overleaf. DAE REG / 295 TODAY DATE OF PURCHASE TEAR OFF HERE AND RETURN MODEL No.
DAEWOO GUARANTEE CONDITIONS This product is guaranteed for 12 months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge during this period by the dealer from whom you purchased the unit. The guarantee is subject to the following provisions. The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or consumable items such as batteries, drive belts or bulbs.