DVD-VIDEO PLAYER Owner’s Owner’s Manual Manual SD-9500/SD-3500 - Region code of DVD/Video player for home is region “2” or ALL. In inserting a disc with other region code, it does not operate. Please only use a disc with region code 2 or ALL. is a ‘DO NOT’ mark. If this mark is displayed in operating the product, please wait for a while, then use it. If " DO NOT" mark continues to be displayed in pressing a button after that, it means the button does not function in the currently played disc.
Product information Contents Product Information DVD Operation Important Safeguards ..................................................... 2 Advantages of This Product Are .... ............................ 5 Read Carefully before Using ......................................... 6 Identification of Controls ............................................... 7 Remote Control ................................................................ 9 Playing a desired scene ..............................................
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
13 LIGHTNING For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 14 DISC TRAY Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury.
Identification of Controls Cautions in use of DVD-Video player are described below. Main body (front panel) contact and consult your nearest service center about checking and replacement. ✔ In recording important screen • Be sure to record the screen and check whether ✔ Installation place and handling recording is performed properly. We beg you • When you place this player near other devices, to understand compensation of recording if they may affect poorly together.
Product information Identification of Controls Remote Control ! Main body (Rear Panel) [DVD] MENU button @ POWER button @ ! #$ ^ ! # [DVD] TITLE /PBC button $ [DVD] OPEN/CLOSE button, [VCR] EJECT button % [DVD, VCR] MOVE/SELECT in OSD, [VCR] Channel 6 Up/Down button VCR @ # $ DVD MENU ! POWER CORD It is a jack for supplying power to the unit. Connect to outlet in a wall.
Setting up your player Connecting your player through extra equipment (satellite system) ■ Before you start, unplug all the equipment from the mains supply. (Option 1) - Connecting your player through RF lead ■ Before you start, unplug all the equipment from the mains supply.
Connecting your player to the Hi-Fi system How to connect your player to another player ■ Before you start, unplug all the equipment from the mains supply. ■ Before you start, unplug all the equipment from the mains supply. How to connect Option 1 First player Aerial Hi-Fi 230V~, 50/60 Hz Plug a phono cable into the “Audio L/R” sockets on the back panel and into the audio sockets on any audio amplifier, if needed. If your player does not have this connection, see page 14.
Connecting Dolby Digital Amp with Digital Audio Out Jack 2nd scart socket 2nd scart socket If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on pages 11-13. 2nd scart Installation How to connect INPUT ONLY REAR PANEL OF DVD-VIDEO INPUT+OUTPUT When connecting other equipment please refer to their manuals for further information. This video manual recommends the set up as shown on page 11.
Initial Installation Setting time and date / Auto clock ■ Switch the TV on. ■ You can also start "AUTO SET" in the SETUP "PR PRESET" "AUTO SET". ■ To tune in new stations (manual tuning) and to enter station names see page 23-24. Setting time and date Setting up the player ■ Press [VCR] button on the remote control to change into VCR Mode and follow the procedure below. 1 You should see this picture the first time you switch on the TV and player. Choose your language.
OSD ON & OFF DVD Playback OSD (On Screen Display) ON & OFF 1 This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it to OFF mode. Press [ ] button to power on. Press [DVD] button of REMOTE to change into DVD mode. VCR DVD MENU 1 SETUP Call the player’s "MAIN SETUP". TIMER PROGRAM PR PRESET VCR SETUP TAPE CONTROL PR+/-:SELECT OK:CONFIRM SETUP:END OPEN/CLOSE 3 Select “OSD ON/OFF”. If you want OSD OFF mode, select it and press [OK] button to confirm.
VCR Playback 1 Press [ Recording To Record With VCR ] button to power on. Press [VCR] button of remote control to change into VCR mode. VCR VCR DVD MENU DISPLAY TITLE/PBC OPEN/CLOSE INPUT PR + 2 DVD Insert the desired tape. MENU OK SE TU P REPEAT ENTER PR - PLAY/PAUSE PROGRAM D AUDIO NEXT SEARCH CLK/CNT REC R/3 EA SUBTITLE TV/VCR ZOOM ANGLE/DIGEST 3 4 TRACKING If you want to playback it, press [PLAY/PAUSE] button.
Recording Tuning in New Stations To Copy From DVD To Videotape 1 2 3 Insert the desired DVD disc. When it is a DVD disc with copy protect function, you can’t copy it. Insert a recordable tape. Press [REC] button during playing of DVD. DVD plays and VCR starts recording. If you press STOP [ ] button in DVD mode, DVD and VCR will stop at the same time. If you press STOP [ ] button in VCR mode, VCR stops to record and DVD continues to play.
Tuning in New Stations Timer Recording Station names ■ For timer recordings, clock, date, and stations must be set correctly. ■ Load a cassette with its safety tab in place and with sufficient free space for the recording. ■ If your player is showing no station name or is showing a station name incorrectly, you can correct this. Timer recording using ShowView (SD-9500 only) 1 2 Call this menu (just see the previous page), if it isn't displayed. Select NAME position.
Timer Recording Timer Recording ■ For timer recordings, clock, date, and stations must be set correctly. ■ Load a cassette with its safety tab in place and with sufficient free space for the recording.
More Functions More Functions ■ The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape. ■ If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15). Clock / counter display Each time you press [DISPLAY] button, 1x: Time and date+current status Time and date 2x: Counter+current status counter 3x: disappear.
More Functions Connections and Copying ■ The player machine records the complete sound signal transmitted by the TV station. ■ On the mono VCR, you will hear the normal mono sound. ■ If you are using a SCART cable, select the AV input on the TV to see the picture from the player. ■ If you are not using a SCART cable, select the button number on the TV reserved for video input to see the picture from the player.
Connections and Copying Playing a desired scene ■ Switch off all components when connecting or disconnecting cables. To skip scenes in a disc Copying To copy to your player from another video machine, connect the two machines with a cable between their EURO AV (SCART) sockets and select as programme "AV 1/AV 2" or “F. AV” (front sockets) using the [AV], [PR+/-] or [ ] button. Set the other video machine to playback and your machine to record.
Playing desired scene Playing desired scene Playing a programmed order Repeating a defined period from A to B While STOP or Playback, press [PROGRAM] button. 1 While the right figure is appearing, please input desired Title and Chapter number with NUMBER buttons. Press [ENTER] to memorize. Then input next number. To cancel, move the cursor to the desired parts and press [CLEAR] button. ■ You may repeat a defined period from A to B. PROGRAM TITLE CHAPT SEL.
Playing a desired scene Confirming the current PLAY mode on screen Searching VCD, CD and MP3 with a track or track time If you want to search with a track number, press [SEARCH] button one time. T 001/013 ➟ In case of PBC OFF, the screen like the right figure appears. It shows current and total track numbers. Please enter the new track number to be searched using the [NUMBER] button. While in playing, press [DISPLAY] button. It shows the current disc mode.
Confirming the current PLAY mode on screen Confirming the current VCD, CD, MP3, JPEG disc mode Selecting an AUDIO language, SUBTITLE language and 3D AUDIO Selecting an audio language ■ The user may select an audio language and subtitle language if a disc includes Multi-language. Keep pressing [AUDIO] button till the user’s preferred language appears in playback mode.
Selecting ZOOM and Multi Angle About MP3, JPEG discs Using a zoom function Playing a disc containing MP3, JPEG files ■ The user can enlarge the current screen about 2 or 4 times. This unit will play MP3, JPEG files recorded on CD-R and CD-RW discs. • For the case of SVCD and VCD, only 2 times Zoom is available. • During 4 time zoom, subtitle language can’t be seen. Keep pressing [ZOOM] button till the preferred zoom appears.
About MP3, JPEG discs Displaying menus in a disc 6 Select the file to listen to (or view). Move the cursor to desired file which you want to listen to (or view) by pressing [ ] button and press [ENTER] button to confirm. The selected file will be playback. * To disappear the directory screen, press [MENU] button in playback or stop mode. Press [MENU] button again to make it appear. DISC: \DIR--01 ..
Video Setup Language Setup ■ A user can set OSD language, Audio, Subtitle and Disc Menu. 1 “OSD” means “On Screen Display”. 2 While STOP or RESUME STOP, press [SETUP] button. ■ A user can set up a connected TV condition and screen. LANGUAGE VIDEO OSD LANGUAGE AUDIO SUBTITLE DISC MENU Selecting a OSD language. Please select a language to be displayed on DVD screen.
Others Setup 1 2 3 4 The initial password is 3308. In case you forget newly-input password, you can use 3308 as a password. 5 Select character display window. Select "On" to make OSD(On Screen Display) language displayed in screen. VIDEO OSD SCREEN SAVER DEFAULTS PARENTAL MOVE œ √†… AUDIO OTHERS ON ON RESET 8 ADULT SELECT:ENTER Select Parental. Press [ENTER] button when the cursor is located in PARENTAL.
Basic information about VCR and Videotape About DVD CHAPTER It means the information recorded in a DVD. A title in a DVD is divided into many tracks, of which a track is called as a chapter. A certain scene of a screen can be quickly searched with the chapter number. TITLE It means the information recorded in a DVD. A DVD can be divided into may titles. TRACK dts It means the information recorded in a video CD and audio CD.
Before doubting about troubles (VCR) Before doubting about troubles (VCR) Symptom • “Power On” does not work. ➤ Please check whether a power plug is inserted in an electric outlet. • It does not work even in “Power On”. ➤ ➤ Please check whether a videotape is inserted in. Try to insert a plug again. ➤ ➤ ➤ Please check whether a power plug is inserted in an electric outlet. Please check whether a videotape is in.
Before doubting about troubles (DVD) Symptom • The recorder does not play. Checks ➤ ➤ ➤ • • • • • No sound comes through. A disc is playing but screen does not appear or poor screen appears. Sound is irregular REMOTE does not work. Dolby Digital sound does not work ➤ If a DVD is from overseas, it may not be played. Please check a DVD’s region code whether it has the relative region code 2 or All. Please check whether a DVD is inserted in a right direction.