VIDEO AUDIO STAND-BY PR Instruction Manual MODEL NO.
IDENTITY OF FEATURES ON LOCAL AND REMOTE CONTROL LOCAL CONTROL Back Front REMOTE CONTROL TV mode 1POWER 2NUMBER 0-9 3MENU 4AV 5PR (CURSOR)UP 6VOLUME UP (CURSOR RIGHT) 7OK(NORMAL) 8PR(CURSOR) DOWN 9VOLUME DOWN(CURSOR LEFT) AMUTE BRECALL CSLEEP DSKIP EMOVE FDELETE GTELETEXT HNot Used ITIME 1 1 2 3 4 5 6 7 8 9 0 MENU 2 4 3 5 NORMAL PR 9 6 OK 7 PR 8 10 SLEEP RECALL 12 11 DEL MOVE TIME MODE 15 SKIP 13 14 17 16 TELETEXT mode 1POWER 2NUMBER 0-9 3MENU 4NOT USED 5PAGE UP 6SUBPA
CONTENTS * Identity of features on Local and Remote Control 1 * Important safeguards 2 * Installation 3 After moving the set 3 Inserting Batteries into the Remote Control Unit 3 Aerial connection 3 Mains connection 4 Switching the set on and off 4 Tuning the TV Channels 5 Edit 5 Manual Channel Setting 6 * Daily use 7 Selecting a Programme Number 7 Volume and Picture control 7 Timer 8 Sleep 8 Recall 8 Child Lock 8 Time 8 * Teletext 9 * Connecting the External Equipment
INSTALLATION AFTER MOVING THE SET If the used set is moved or placed in a different direction, the MAIN POWER button must be switched off for at least 15 minutes in order to take out a colour strain on the screen. INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT Press down the battery compartment grip and slide the cover, Insert the batteries supplied(two 1.5v, type AA). Make sure that the polarity matches with the (+) and (-) marks inside of the battery compartment.
MAINS CONNECTION Plug the mains cable into the power socket with 220V/50Hz AC. SWITCHING THE SET ON AND OFF Switching On Switch the set on with the MAIN POWER button, ( ). The set will turn on. If not, press either : - PR UP or DOWN button on the front of set - or POWER button or the UP/DOWN button or one of the NUMBER button 0..9 on the remote controller. The STAND-BY INDICATOR will turn off and a picture will appear on the screen.
TUNING THE TV CHANNELS MAIN MENU Press the MENU button to call up the MAIN MENU. The MAIN MENU is consist of 5 sub-menus: PICTURE, TIMER, LANGUAGE, PRESET, EDIT menu. MAIN MENU PICTURE TIMER LANGUAGE PRESET EDIT LANGUAGE SELECTION Select a LANGUAGE menu at the MAIN MENU by placing the cursor on the LANGUAGE with UP/DOWN button and pressing the OK button. You can choose language you require with UP/DOWN button. Press the MENU button to return to the MAIN MENU.
MANUAL CHANNEL SETTING You can also call up the PRESET menu at the MAIN MENU. Press the NUMBER button 0..9 or UP/DOWN buttons to select a programme number you want. The screen will change according to the selected programme number. SEARCHING A CHANNELS Locate a cursor to with LEFT/RIGHT button and then press the UP or DOWN button. The tuning screen will appear and the cursor will move from left to right.
DAILY USE SELECTING A PROGRAMME NUMBER The set has a total of 70 programme numbers, 0..69. The NUMBER button 0..9 are used for direct programme selection. In order to select two-digit programm, press the second numbered button within two seconds. Switch through the programme number step by step with the UP/DOWN button. VOLUME AND PICTURE CONTROL VOLUME CONTROL Adjust the volume with the VOLUME ( ) DOWN/UP buttons on the front of the set, or with the LEFT/RIGHT button on the remote control.
TIMER In the MAIN MENU, Select TIMER menu. SETTING THE CLOCK Press the button on the CLOCK line. Set the hours and minutes with the NUMBER button 0..9 Press the OK button to complete. The clock will start. Note that if you turn the TV off with MAIN POWER button, the clock setting is lost and must be reset if necessary. SETTING THE WAKE UP TIME Set WAKE UP TIME in a same way to the above for CLOCK. Set ACTIVATE "YES" or "NO" with the LEFT/RIGHT button. When ACTIVATE is "YES", the function is enabled.
TELETEXT SWITCHING TELETEXT ON/OFF Press the TELETEXT button ( ). The index page viewed last will appear. Press the TELETEXT button to return to the TV mode. COLOUR BUTTONS IN TOP/FLOF TELETEXT A red, green, yellow and blue field is shown at the bottom of the screen. If TOP or FLOF teletext (FASTEXT) is transmitted by the station, pressing the corresponding colour button on the remote controller, you can select the desired page easily. SELECTING PAGES The NUMBER button 0..9 are used to enter a page number.
WATCHING TELEVISION DURING TELETEXT MODE Some pages are continually update, for example, stock market reports, sports announcements, and the latest news. If you want to watch television and stay informed at the same time, press CANCEL ( ) button. The regular programme is still visible and the teletext symbol ( ) appears at the top of the screen. Pressing the CANCEL button again, the teletext page appears with the update information.
CONNECTING THE EXTERNAL EQUIPMENT HEAD PHONE JACK Insert the headphone plug(3.5mmø) into the headphone socket. The sound from the speaker will be cut off. SCART JACK This is used to connect: a VCR, a PAY-TV decoder, a Camcoder and a video game console. In most case, the set changes automatically to AV mode, when the VCR connected is in play back mode. If not, press the AV button ( )on the remote control or on the front of the set.
MEMO 12
