INSTRUCTION MANUAL COLOR TELEVISION MODEL NO.
Contents Important safeguards 1 Before Operation 2 Connecting external equipment 3 Identification of Controls 5 Daily use 6 Menus 8 Teletext (Option) 14 The othello game 16 Specifications 18 Troubleshooting 19 This information is placed by The law of RF on Protechion of the Consumer Rights and the Governmental Resolution of RF No.720. The working life of this set is 7 years since its production date.
Important safeguards WATER AND MOISTURE Never install the set in the following places : In a wet basement, bathroom. Do not place any container with liquid on the set. The apparatus shall not be exposed to dripping or splashing water and that no objects filled with liquids, such as vases, shall be placed on the apparatus. HEAT Never place the set near heat sources.
Before Operation Battery options INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT.(OPTION) Insert the batteries (two 1.5V, type AAA) MAINS CONNECTION Plug the mains cable into the power socket with 110V-250V, 50/60Hz AC. AERIAL CONNECTION When using an outdoor aerial, it is usually connected to the set by means of 75 ohm. SWITCHING ON AND OFF Switching on Switch the set on with the MAIN POWER button(ON/OFF), and then PR UP button on the front of the set.
Connecting external equipment TV AND AV Use the TV/AV( ) button on the remote control or on the front of the set to select one of the three options. Whenever the TV/AV ( ) button is pressed, the on-screen display will be changed as shown: AV( S-VHS is Russia only ) GAME TV If you push the PR UP/DOWN buttons in AV mode, the on-screen display will be changed TV mode. RCA JACK AV (BACK) SCART (OPTION) This is used to connect a VCR, a Camcorder, a S-VHS VCR, a PERI-TV decoder or a video game console.
RCA JACK AV (FRONT) Connect the AV (Audio/Video) socket with an appropriate cable to the corresponding socket of the external equipment. Select AV mode by pressing the TV/AV( ) button. Press the TV/AV( ) or PR UP/DOWN buttons to return to the TV mode. NOTE: If two apparatus are connected, one to the front AV Jack and the other to the rear SCART Jack, you can play only one apparatus. one of the them must be switched off. OR OR HEADPHONE JACK Insert the headphone plug(3,5mm) into the headphone socket.
Identification of Controls Back Aerial terminal VIDEO Aerial Terminal AUDIO SCART (OPTION) RCA Jack REMOTE CONTROL TV mode TELETEXT mode (Option) ① POWER ① ON/OFF ② NUMBER 0-9 1 1 2 3 4 5 6 ③ NORMAL/OK ③ INDEX ④ AV 2 7 ⑤ PR (CURSOR) UP ⑥ VOLUME UP ④ MIX 9 ⑤ PAGE UP 0 (CURSOR RIGHT) ⑨ VOLUME DOWN 8 NORMAL/OK 4 3 PR 7 ⑦ MENU ⑧ PR (CURSOR) DOWN ② NUMBER 0-9 5 MENU ⑥ SUBPAGE ⑦ MENU ⑧ PAGE DOWN 9 6 ⑨ HOLD ⑩ MUTE 8 PR (CURSOR LEFT) ⑩ MUTE ⑪ RECALL 10 SLEEP RECALL 12 11
DAILY USE PROGRAMME SELECTION Direct selection Use remote control NUMBER 0…9 buttons. For two or three digits programme numbers, press the button for the next digit within 2.5 seconds. Up/Down moves Use PR UP/DOWN buttons of the remote control unit or on the front of the set. SOUND CONTROL Volume adjustment Use VOLUME UP/DOWN buttons of the remote control unit or on the front of the set. Mute Get sound off by pressing the remote control MUTE ( ) button. Then, logo ( ) is displayed.
SLEEP FUNCTION Pressing repetitively the remote control SLEEP button, you can enter one of the following settings : OFF > 30 min > 60 min > 90 min > 120 min > OFF The set will be turned off after the time you set. The remaining time before TV turn-off is displayed on programme status. PROGRAMME STATUS DISPLAY Accessed by the Remote Control RECALL button.
Menus MAIN MENU All menus are removed within 25 seconds if you don’t press any button. Direct selection Press remote control MENU button to display main menu. Then, you have the choice among several submenus. PICTURE FEATURES INSTALL If you want to cancel immediately main menu, press MENU button once more. To select one of the sub-menus, use remote control CURSOR buttons UP, DOWN, LEFT, RIGHT. To enter the selected sub-menu, press remote control NORMAL/OK button .
PICTURE MENU Enter PICTURE in the main menu. You can select each function with the UP/DOWN buttons. Use the LEFT/RIGHT buttons to adjust each function. Explanation for each function will be displayed in the lower screen whenever you select the function. (Tint control for AV NTSC only) PICTURE BRIGHT. CONTRAST COLOUR SHARP. TINT FEATURES MENU LANGUAGE Language selection. FEATURES CHILD LOCK Child lock prevent the use of the TV set without remote control unit.
INSTALL MENU AUTO SETUP Automatic search system. EDIT Programme list edition. FREQ. Channel Frequency. NAME Channel name. PROGRAM Programme number. STORE TO Programme storage number. INSTALL AUTO SETUP EDIT FREQ. 211.25 NAME ----- PROGRAM 01 STORE TO 01 EDIT MENU PR Programme number. NAME Station name. Skip : programme skipped.
AUTO SETUP Select “AUTO SETUP” and Press remote control “NORMAL/OK” button more than 3 seconds to start automatic searching. PROGRAMME LIST EDITION Select "EDIT" function and confirm with the remote control “NORMAL/OK" button : Edit menu appears and shows existing recorded programmes. The recorded programmes can be modified as follows : Channel skipping You can select skip "YES" or "NO" using the remote control SKIP button .
MANUAL CHANNEL SETTINGS Choose starting point Select with "PROGRAM" function the programme from which you want to start manual tuning.Then, the channel number, the frequency, the name and the programme number of this programme are displayed in the install menu. Channel searching Select "FREQ." function. Press the remote the remote control CURSOR RIGHT / LEFT buttons for more than 3 seconds to start (up / down) manual tuning. After searching, tuning will stop automatically to the next channel.
Fine Tuning If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to fine tune a signal. Select channel frequency ("FREQ.") function. Press and release the remote control CURSOR RIGHT/LEFT buttons to fine tune a signal. Enter station name Select "NAME" function. Use the CURSOR RIGHT/LEFT buttons to select the character (letter) you want to modify. To modify this letter press the CURSOR UP/DOWN buttons until the desired letter is displayed.
Teletext (Option) SWITCHING TELETEXT ON/OFF Press the TELETEXT button ( ). The index page viewed last will appear. Press the TELETEXT button to return to the TV mode. Note that theTELETEXT at this TV set is operated to Level 1.5. SELECTING PAGES The NUMBER button 0..9 are used to enter a page number. The selected page number appears at the top of the screen and the page appears after a short time. The UP/DOWN buttons increase or decrease the current page number step by step.
IDOUBLING CHARACTER SIZE Repeatedly pressing the SIZE( ) button doubles the character size in the following order: Upper half of the page Lower half of the page Return to normal size. MIX Pressing the MIX button( ) in teletext mode, you can see an aerial channel also in the back ground. If you control bright and contrast in the Mix mode also TV mode is controlled at the same time. REVEAL ANSWER This function can be used on certain pages to reveal the solution of riddles.
The othello game 1. Introduction Othello is a two player strategy game. Othello is player on an 8 x 8 square board, one taking yellow while the other taking green. The object of Othello is to flip as many of your opponents discs to your color as possible without opponent flipping your discs. 2. The Rules The initial configuration, before the game starts, is: Green starts playing first.
3. How to Play 1. Press the TV/AV( ) button to open the Game mode RF AV S-VHS(Russia option) GAME 2. Select Opponent This option allow you to choice opponent. You can select Man vs Man or Man vs TV. If you choose Man vs Man, game start directly. PLAYER 1: PLAYER 2: 02 02 SELECT OPPONENT MAN vs MAN MAN vs TV . Move to your choice : . Select your opponent :OK button MENU:New game TV/AV:End game :Move OK:Select 3.
Specifications TV Standard Main Voltage Power Consumption PAL/SECAM-B/G, D/K, H, I/I(NTSC AV ONLY) AC110-250V~, 50/60Hz 14E* : 49W KR14E5 : 49W 14V* : 49W KR14V* : 49W 14P2M : 57W KR14D* : 57W 14Q2M : 57W KR14U* : 57W 14S2M : 57W KR1420* : 57W 14T2M : 57W KR20E5 : 60W 14U* : 57W KR20U2* : 60W 14D* : 57W KR20V* : 60W 14K8MT : 57W KR15* : 64W 20V* : 60W KR20D* : 66W 20P2M : 66W KR21E5 : 68W 20Q* : 66W KR21V* : 68W 20D* : 66W KR21U2* : 68W 20S2M : 66W KR20U1* : 68W 20T* : 66W KR21V* : 68W 20K8MT : 68W KR20U3*
Troubleshooting Sometimes some performance problems can be easily solved by checking seemingly apparent but often overlooked possibilities. Before asking for service, to check these items could save your time and money. SYMPTOM No picture or sound. Picture is OK, but No Sound Sound is OK, but No Picture No Colour Excessive noise in picture Diagonal stripes appear on picture Picture has "Snow" Ghost images appear. CHECK • Check the TV set is plugged in.
P/N : 48586195E202-R0
