Electronics Projection Television

Automatic Channel Memory
-26-
Press the “Menu” button.
• The menu screen appears as
follows.
• Press the “◀VOL▶” button until the
“△” mark will come on the “Set up”.
• Press the “CH▲” button if the “△”
mark will come on the “Set up”.
Select the “Air/Cable” by pressing the “▼CH▲” button.
• Select the “Air/Cable” by pressing
the “▼CH▲” button.
• Select “Air” to watch the general
broadcasting, and select “Cable” to
watch the cable TV by using the
“◀VOL▶” button.
- This is function for the TV to automatically memorize only the broadcasted channel. If setup the Auto Channel,
you can simply find out channels with the channel “▼CH▲” button and so need not to select channels by
pressing each channel number.
- Always enter this function at the regular TV On-Air time with antenna connected. Air/Cable channel currently On-
Air is memorized respectively if setup Auto channel for the General/Cable broadcasting. Always perform this
process again if moving to another place or moving the TV.
Automatic Channel Memory