Electronics Projection Television

-57-
Select “Convergence”.
Adjust the Convergence.
• The “▼CH▲” button selects items
and the “◀VOL▶” button changes
data of the selected item.
• The “◀VOL” button moves color to the
left (upper) and the “VOL▶” button
moves color to the right (lower).
• Adjust the screen so that color of the
middle cross becomes white.
• Adjust blue color in the same manner.
• Adjust the screen so that color of the
middle cross becomes white in the
length and the width.
Press the “Menu” button.
• Press the menu button until the menu screen disappears.
• Ensure that color is correct by turning the channel.
• Perform setup again if color is unmatched.
• Before thinking it as failure