Service manual

ManualsBrandsDaewoo ManualsProjection TV5520CRA

http : //svc.dwe.co.kr

Caution

: In this Manual, some parts can be changed for improving. their

performance without notice in the parts list. So, if you need the

latest parts information, please refer to PPL(Parts Price List)in

Service Information Center(http://svc.dwe.co.kr)

DAEWOO ELECTRONICS Corp.

Service Manual

Feb. 2004

S/M No. :DSJ112FEFO

REAR PROJECTION TV

CHASSIS : SJ-112

MODEL : DSJ-4710CRA/5510CRA

DSJ-4720CRA/5520CRA

Summary of content (97 pages)

PAGE 1
S/M No. :DSJ112FEFO Service Manual REAR PROJECTION TV CHASSIS : SJ-112 MODEL : DSJ-4710CRA/5510CRA DSJ-4720CRA/5520CRA Caution : In this Manual, some parts can be changed for improving. their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List)in Service Information Center(http://svc.dwe.co.kr) DAEWOO ELECTRONICS Corp. http : //svc.dwe.co.kr Feb.
PAGE 2
Contents 1. Safety Instruction 3 2. Product Specification 4 3. Remote Control 5 4. Adjusting Method 6 5. Explanation for circuit operation 12 6. Trouble Shooting 34 7. Service Part list 43 8. Schematic Diagram 1) Block Diagram 2) Power 3) Rear IO 4) AV main 5) deflection 6) Convergence Amp & Sound Amp 7) Convergence Module 8) CRT Amp 9) Control & side 76 77 78 79 80 81 82 83 84 9.
PAGE 3
1. Safety Instruction 1. When all services are carried out, every item required in this manual needs to be followed and the services should be performed by A/S man. 2. The following general items should be performed before staring the services. 1) Unplug the power. 2) Uncover the cabinet. 3) To prevent a danger of shock, touch a terminal of plug on the chassis ground and discharge a remaining voltage. 4) Check if all parts are in the proper places, omitted or burned.
PAGE 4
8. How to check a leakage current 1) Plug the power directly. 2) After connecting 1.5V 10W resistance and 0.15uF condenser in a row, link one with an exposed metal part of TV set and earth the other (proper earth place such as water pipe). 9. A couple persons or more should perform the repair. When a back cover needs to be separated, pull it out about half and remove the power cord before complete uncovering. 10.
PAGE 5
2. Specifications Input voltage Power consumption Dimensions (W x H x D) General Weight Antenna input Screen size Scanning type Image Voice External Input/ Output CRT size Sound system NTSC voice Voice output Rear Antenna input NTSC AV input NTSC AV monitor output Component input Right NTSC AV input AC 220V, 60Hz 230watts 1278 x 1351.7 x 586mm (5510) 1278 x 1351.7 x 591mm (5520) 1110 x 1210 x 532.5mm (4710) 1110 x 1210 x 529.5mm (4720) 77.9Kg(55”), 66.
PAGE 6
3. Specifications of remote control Power DISPLAY TV/VCR/CATV Channel number (0-9) Use to select channel directly 0~9 100 Prev Use it when selecting a channel number of over 100 It returns to previous channel. MENU Use it to make picture adjustment, screen format, sound adjustment, input selection, and utilities. TV/Component TV -> Component 1 -> Component 2 -> TV TV/VIDEO Use this function to make video input selection.
PAGE 7
4. Adjusting Method Adjustment of temporary ITC Step 1. Temporary fixation of DY 1) Insert DY in R, G, B CRT and tighten the screws properly with DY pushed upward to the end (Refer to Figure 1) 2) Adjust the slant and position of DY so that the rectangle projections of DY are shown in front of the set. DY rectangle projection GENTERING VM COIL MAGNET (Figure 1. Front part of CRT assembly) Step 2.
PAGE 8
Adjusting Method Completion of control - All adjustments need to be performed after heat-run for 30 min or more. - Heat-run is executed in the state of non-signal noise. - If a retrace line appears on the screen during heat-run, rotate the screen VR left and carry out heat-run when it disappears. - Note) If stop image is kept over 10 min, a fluorescent material of CRT can be damaged. Step 1. Control of screen voltage 1) Select ‘Video 1’ without a signal.
PAGE 9
Adjusting Method 4) When the focus control is finished, apply a silicon bond between inside and outside diameter, paying attention so that the lens isn’t moved. 5) Project R, G, B signal only by one signal, using a lens cover and control G, R and B in the order. Note) This control should be performed in a darkroom. Especially, be careful not to touch the lens with a hand. Step 3. Focus control 1) Receive RETMA pattern. 2) Rotate the focus-pack of focus VR right and left to fix the optimum focus.
PAGE 10
Adjusting Method Step 5. Control of deflection yoke and tilt 1) Receive CROSS-HATCH pattern. 2) Rotating a loose DY left and right, control it so that the horizon of R, G, and B can be projected on to the screen correctly in the form of horizon. (Refer to the center point of Front -Mask) 3)After adjusting the R, G, B, FY, fix the DY with a lever not to turn. Step 6. Control of raster position 1) Receive CROSS-HATCH pattern.
PAGE 11
Adjusting Method 2) Connect I2C line of the auto alignment system with housing (P503) at the top of a convergence board. 3) Select CONV.EXE in the auto alignment system program and press ENTER. 4) Control the user convergence with a remote control after the control is finished. b. Control of 1080i convergence 1) Repeat the above 1) to 4) for 1080i mode. Step 8. Control of white balance 1) Connect a control pattern (intra-office signal cable broadcasting 32 CH) with external input 3.
PAGE 12
Adjusting Method Step 9. Control of 480p color accord 1) Receive Cross-Hatch 480p signal by using HD signal output instrument. 2) Press the S7 key of service remote control to enter the 480p color accord control mode. 3) Change RHLIN to control RED color accord. 4) Change BHLIN to control BLUE color accord. Measuring unit:VG-858(ASTRO) Initial data (S7) RH LIN : -53 BH LIN : +127 Step 10. Control of sub brightness - Press the S9 key to enter the Sub Brightness control mode.
PAGE 13
5. Explanation for circuit operation < Contents > 1. Specifications and Features 1-1 Specifications of product 1-2 Features of product 2. Power 2-1 Outline 2-2 Block diagram 2-3 Composition of power supply 2-4 Explanation for power supply operation 3. Deflection 3-1 Outline 3-2 Block diagram 3-3 Composition of deflection part 3-4 Explanation for operation 4. Video signal processing 4-1 Block diagram 4-2 Video processor 5. Sound 5-1 Switching part 5-2 Sound processing 6.
PAGE 14
Explanation for circuit operation 1. Specification/Feature 1-1. Specification of prodict Input voltage Power consumption Dimensions (W x H x D) General Weight Antenna input Screen size Scanning type Image Voice External Input/ Output CRT size Sound system NTSC voice Voice output Rear Antenna input NTSC AV input NTSC AV monitor output Component input Right NTSC AV input AC 220V, 60Hz 230watts 1278 x 1351.7 x 586mm (5510) 1278 x 1351.7 x 591mm (5520) 1110 x 1210 x 532.5mm (4710) 1110 x 1210 x 529.
PAGE 15
Explanation for circuit operation 2. Power 2-1. Outline This power is a power supply of 230W to provide a power for 55”/47”CRT Projection TV. 2-2. Block diagram The block diagram of this power is as follows. 2-3 Composition of power supply This power supply is formed in Fly-back type to provide various powers. The design specification of this power supply is as follows. 1) Input power: 120Vac (+/- 10%), 60Hz 2) Power consumption : 230W 3) The second power supply is shown in table 1-1.

PAGE 16

Explanation for circuit operation No. Position Kind Purpose Current Remark

The second power supply No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Position T802 T802 T802 T802 T802 T802 T802 T803 T803 T803 T803 T803 T803 T803 T801 Kind 200V 135V 12V 9V 5V 5V 6.3V +25V -25V 30V +7.

Explanation for circuit operation The detailed specifications of this IC are as follows. Terminal No. 1 2 3 4 5 Symbol O. C. P./ F. B S D Vin GND Name Overcurrent/Feedback terminal Functions Overcurrent detection signal Source terminal Drain terminal Power terminal Ground terminal MSOFET source MOSFET drain Control circuit power input Ground Symbol O.V.P T.S.

PAGE 18

Explanation for circuit operation ITEM Voltage via drain-source Terminal Symbol 1-2 VDSS Drain leakage current 1 - 2IDSS ON resistance 1-2 Heat resistance Switching time 1-2 Specifications MIN TYP MAX 650 - Unit V RDS(ON) ch-F - 300 - 3.90 1.63 OHM C/W Tf - - 250 SEC 4) Explanation for operation When the VIN terminal (Pin No.

PAGE 19

Explanation for circuit operation 16V. 5-3) Overheat protection circuit This circuit operates the latch circuit when the frame temps. of hybrid IC goes over 140 (MIN). 5-4) Overvoltage protection circuit This circuit operates the latch circuit when Vin terminal voltage goes over 22.5V and protects the Vin terminal of control circuit from overvoltage. The normal Vin terminal is supplied from an auxiliary coil of trans and this voltage is proportioned to the output voltage.

PAGE 20

Explanation for circuit operation 3-3 Organization of deflecting part This smoothing part is designed to deflect a 55” CRT Projection TV and correct a screen. The design specifications of this deflecting part are as follows. 1) Working frequency: Horizontal frequency (31.45KHz, 33.75KHz). Vertical frequency (60Hz) 2) Vertical / Horizontal deflection This deflection IC used in this deflecting part is TDA4856, the latest HC Control IC of PHILPS. Co. Ltd. The main functions of this IC are shown below. a.

PAGE 21

Explanation for circuit operation 2-1) Horizontal B+ supply part This horizontal B+ supply part cuts off horizontal B+ power by two TRs, using a Darlington circuit. DC voltage supplied for E/W terminal (Pin No. 11) in deflection IC(I403) is input to EW 1st inversion circuit IF11 PIN2 by using EW waveform and then output to PIN1.

PAGE 22

Explanation for circuit operation When B+ 135V is supplied and +5V is applied, approx. 31KV high voltage and 11.6KV focus voltage are generated automatically. If EHT of HVG is outputted more than 35KV, HVG module starts over voltage protection to stop the high voltage. 5) Spot killer components Approx. -220V voltage made by using HVG high voltage output voltage is supplied from HVG PIN4, rectified and smoothed to D819 and C425 and used as spot killer power.

PAGE 23

Explanation for circuit operation Explanation for circuit operation 22

PAGE 24

Explanation for circuit operation 23

PAGE 25

Explanation for circuit operation 24

PAGE 26

Explanation for circuit operation 25

PAGE 27

Explanation for circuit operation 26

PAGE 28

Explanation for circuit operation 27

PAGE 29

Explanation for circuit operation 4. Video signal process 4-1. Block Diagram 4-2. Video processor This part switches and processes DTV input, DVD input, external video signal and TV signal. 1) Signal input/output The signal input is composed of 2 pairs of NTSC TV signals (2 tuners), 3 pairs of NTSC external inputs (Video, S-VHS 3 pairs respectively), 2 pairs of component inputs and 1 pair of monitor outputs.

PAGE 30

Explanation for circuit operation When PIP function is executed in ‘different application mode’ signal processing VSP9407B, the video signal corresponding to a sub screen (Sub CVBS from TU702) is input. VSP9407B performs a scan rate conversion of main video signal and sub video signal from 480I to 480P, overlaps the main video and sub video to convert to PIP screen and outputs them to IC201 (CXA2101Q) in YcbCr-H-V format.

PAGE 31

Explanation for circuit operation 5-2. Sound Processing As shown above, the MSP4321 outputs the main L/R to PIN27, 28 after switching NTSC S/F external input L/R and component 1,2 (DTV, DVD compatible) L/R signals. The main functions of the MSP3421 are volume control, equalizing and balancing. The SIF signal that is input to #67 goes through AGC, A/D, demodulation and demphosis block. The audio signal detected by FM is demodulated and output.

PAGE 32

Explanation for circuit operation 6-2. Block Diagram 6-3. Composition 1) CM0021AF As a digital convergence IC, this inputs HBLK and VBLK, adjusts a register in IC, makes and supplies a digital convergence waveform of RH, GH, BH, RV, GV and BV. It also has Save U-Com function and controls EEPROM (I503: 24WC32) which stores the convergence control data by the order of Master U-Com. The main features of this IC are as follows.

PAGE 33

Explanation for circuit operation 2) CD0031AM This converts the digital convergence waveform to analog waveform as a 6-channel, 16 bit D/A converter IC for digital convergence. The features of this IC are as follows.

PAGE 34

Explanation for circuit operation 7. CRT AMP The video signal that is first amplified in PGB processor is input to video AMP in approx. 3.5Vpp level. TDA111Q used as a video AMP is a 13Mhz band AMP which outputs a video near to Vdd according to gain control voltage when Vdd is 200V. The following figure shows the internal block diagram of TDA6111Q. Block diagram of TDA6111Q There are two cathode outputs and a independent feedback output. Low input (Vdd) is 12V and high input (Vddh) is 200V.

PAGE 35

6. TROUBLE SHOOTING When the screen doesn’t turn up AV/RF Signal YES Check the tuner (TU701 & TU702 NO Is there OSD on the screen? OSD NO No screen mode 1. TV external input 2. Component input 1 No screen mode 1. TV (RF signal) 2.

PAGE 36

TROUBLE SHOOTING When no sound is heard Check IC601 sound signals. #27, #28 YES NO Check IC601 input sound signals. SIF:#67 A/V:#47, #48 Component1:#50, #51 Componen2:#53, #54 YES NO IC601 #38, #39, #40 Check B+ NO YES Chack IC601#47, #48 IA01#32, #33 C604, RC605 C605, RC615 DC603, C606 Check C612 NO NO YES IC606 #11, #12, #13 #65, #66, #80 Check B+ NO LC601, C601, CC601 RC601, L601, C618 CC615, LC602, C602 Check CC607 Check IA01 #44,#46 sound. NO Check IA01 #2,#4 sound.

PAGE 37

TROUBLE SHOOTING #2 #1 YES NO NO Check IC601#71, #72 X-TAL Check X601,CC605 CC606 When IC601 #67 SIF doesn’t work, check TU701 tuner. NO When component IC601#50 #51 sounds aren’t heard, #3 NO When component IC601#53 #54 sounds aren’t heard, YES Check OC614, C617, C607, OC613 and replace IC601.

PAGE 38

TROUBLE SHOOTING No raster. Check IIC bus communication between main assy and I403 Vertical deflection 5Vp-p NO Check main assy, 1403 Check I403 #8 (H-drive output) 0.7Vp-p 31.5KHz Horizontal deflection Check D drive signal in Q401 collector Check H drive signal input in Q402 base 2Vp-p 45Vp-p 6Vp-p NO 31.5KHz Check Q416 31.5KHz 31.

PAGE 39

TROUBLE SHOOTING Check R443 NO Check PB801 135V When power isn’t supplied Output E/W signal in I401 #7 Horizontal drive B+ is input to Q403 base 60Hz 0.5VP-p 0.5VP-p 5V 90V 60Hz If resistance between Q425 collector and GND is near 0ßŸ, horizontal output TR has been destroyed. Replace the TR. Voltage waveform of Q402 collector is shown below.

PAGE 40

TROUBLE SHOOTING Vertical deflection Check I403 #12 vertical SAW waveform NO Check I403 22VP-p 60Hz Check I403 #12 voltage waveform NO Check vertical deflection circuit near I301 22VP-p 60Hz Check I403 #5 vertical deflection waveform NO 50VP-p 60Hz END 39 Check vertical deflection circuit near I403

PAGE 41

TROUBLE SHOOTING When power isn’t supplied (Standby power: I301) Standby power LED isn’t red NO F801 fuse is open C806 + voltage is approx. 150VDC I801 #4 drain voltage waveform NO If I801 #4, #2 source impedance is near 0 , I801 has been destroyed. Replace with a new one.

PAGE 42

TROUBLE SHOOTING When power isn’t supplied Switch relay (RLY) doesn’t work F801 fuse is normal NO Replace F801 fuse NO Replace D801-D804 Check bridge rectifier diode (D801-D804) NO Check if both terminals of power cord are open Check a part causing short and replace the part.

PAGE 43

TROUBLE SHOOTING When power isn’t supplied Switch relay (RLY) works normally Check if 2nd B+ of power part is short NO NO PA801 135V voltage normal Replace a part causing an error NO R847, 848 normal R823 normal D810, 813 normal Replace R847, 848 NO Replace R823 NO Replace R810, 813 NO Replace R809 Check I802 NO PA803 25V voltage normal R809 normal Replace D813, R813 Check I803 END 42 NO Replace D813, R813

PAGE 44

7. SERVICE PARTS LIST z_loc z_parts_code parts_name parts_descr z_loc z_parts_code parts_name ZZ100 48B5552D04 TRANSMITTER REMOCON R-52D04 (AAA) M215 4952102700 BRKT SCREEN S SECC 1.

PAGE 45

Service part list z_loc z_parts_code parts_name parts_descr z_loc z_parts_code parts_name M491B 4857941200 PROTECT RUBBER SILICON RUBBER M491 4854958007 BUTTON CH ABS GY SPRAY M561 4855624200 MARK BRAND AL T1.0 DIA-CUTTING M491A 7178301011 SCREW TAPPTITE TT2 WAS 3X10 MFZN ZZ210 PTEGPWG003 ENGINE AS DSJ-5510CRA M501 4955000402 PANEL CTRL FR HIPS GY M961 4859600970 COLOR PROJECTION TUBE P16QDU11RJA (P) M501B 4856716000 SPRING SWPA PIE0.

PAGE 46

Service part list z_loc z_parts_code parts_name parts_descr z_loc z_parts_code parts_name PCB1 4859279520 CONN WAFER TAC-L15P-A3 (ANGLE) CC508 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 PCB2 4859279520 CONN WAFER TAC-L15P-A3 (ANGLE) CC509 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 PKB1 4859279520 CONN WAFER TAC-L15P-A3 (ANGLE) CC510 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 PKB2 4859279520 CONN WAFER TAC-L15P-A3 (ANGLE) CC511 HCBK104KBA C CHIP CERA 50V X7R 0.

PAGE 47

Service part list z_loc z_parts_code parts_name parts_descr z_loc z_parts_code parts_name CC561 HCBK122KBA C CHIP CERA 50V X7R 1200PF K 1608 DC513 DMMBD1203B DIODE CHIP MMBD1203 CC562 HCBK102KBA C CHIP CERA 50V X7R 1000PF K 1608 DC514 DMMBD1203B DIODE CHIP MMBD1203 CC563 HCQK100JBA C CHIP CERA 50V CH 10PF J 1608 DC515 DMMBD1203B DIODE CHIP MMBD1203 CC564 HCBK103KBA C CHIP CERA 50V X7R 0.01MF K 1608 DCK1 DZ02W5R1VA DIODE CHIP ZENER Z02W5.

PAGE 48

Service part list z_loc z_parts_code parts_name parts_descr z_loc z_parts_code parts_name DCT13 DZ02W5R1VA DIODE CHIP ZENER Z02W5.1V remark RC123 HRFT112JBA R CHIP 1/10 1.1K OHM J 1608 DCT14 DZ02W5R1VA DIODE CHIP ZENER Z02W5.1V RC124 HRFT101JBA R CHIP 1/10 100 OHM J 1608 DCT15 DZ02W5R1VA DIODE CHIP ZENER Z02W5.1V RC125 HRFT101JBA R CHIP 1/10 100 OHM J 1608 DCT16 DZ02W5R1VA DIODE CHIP ZENER Z02W5.

PAGE 49

Service part list z_loc z_parts_code parts_name parts_descr RC519 HRFT750JBA R CHIP 1/10 75 OHM J 1608 RC520 HRFT750JBA R CHIP 1/10 75 OHM J 1608 RC521 HRFT471JBA R CHIP 1/10 470 OHM J 1608 RC522 HRFT101JBA R CHIP 1/10 100 OHM J 1608 RC523 HRFT101JBA R CHIP 1/10 100 OHM J 1608 RC526 HRFT101FBA R CHIP 1/10 100 OHM F 1608 RC527 HRFT101FBA R CHIP 1/10 100 OHM F 1608 RC528 HRFT101FBA R CHIP 1/10 100 OHM F 1608 RC529 HRFT103JBA R CHIP 1/10 10K OHM J 1608 RC530 HRFT101FBA

PAGE 50

Service part list z_loc z_parts_code parts_name parts_descr z_loc z_parts_code parts_name RCK4 HRFT224JBA R CHIP 1/10 220K OHM J 1608 remark C123 CEXF1H100A C ELECTRO 50V RSM 10MF (5X7) TP RCK5 HRFT224JBA R CHIP 1/10 220K OHM J 1608 C124 CEXF1H100A C ELECTRO 50V RSM 10MF (5X7) TP RCK6 HRFT750JBA R CHIP 1/10 75 OHM J 1608 C126 CEXF1H100A C ELECTRO 50V RSM 10MF (5X7) TP RCK7 HRFT750JBA R CHIP 1/10 75 OHM J 1608 C127 CEXF1H100A C ELECTRO 50V RSM 10MF (5X7) TP RCK8 HRFT750

PAGE 51

Service part list z_loc z_parts_code parts_name parts_descr C538 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP C539 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP C540 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP C541 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP C542 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP C543 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP C544 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP C545 CEXF1C470V C ELECTRO 16V RSS 47MF (5X11) TP C546 CEXF1C470V C ELECT

PAGE 52

Service part list z_loc z_parts_code parts_name parts_descr J932 85801065GY WIRE COPPER AWG221/ 0.

PAGE 53

Service part list z_loc z_parts_code parts_name parts_descr z_loc z_parts_code parts_name J666 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING J936 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING J667 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING J937 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING J668 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING J938 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING J669 85801065GY WIRE COPPER AWG22 1/0.

PAGE 54

Service part list z_loc z_parts_code parts_name parts_descr z_loc z_parts_code parts_name R904 RD-AZ332J- R CARBON FILM 1/6 3.3K OHM J R960 RN-2Z4708F R METAL FILM 1/2 4.7 OHM F R905 RD-AZ101J- R CARBON FILM 1/6 100 OHM J R961 RN-2Z4708F R METAL FILM 1/2 4.7 OHM F R906 RD-AZ332J- R CARBON FILM 1/6 3.3K OHM J R962 RN-2Z4708F R METAL FILM 1/2 4.7 OHM F R907 RD-AZ101J- R CARBON FILM 1/6 100 OHM J R963 RN-2Z4708F R METAL FILM 1/2 4.

PAGE 55

Service part list z_loc z_parts_code parts_name parts_descr ZZ200 PTCPJ0G018 PCB CRT ODD SHAPE AS CN20 CEXF2E330V CN29 remark z_loc z_parts_code parts_name DSJ-5510CRK LN12 5CPX471J— COIL PEAKING 470UH J (RADIAL) C ELECTRO 250V RSS 33MF (13X25) TP LN13 5CPX471J— COIL PEAKING 470UH J (RADIAL) CEXF2E330V C ELECTRO 250V RSS 33MF (13X25) TP LN14 5CPX829K— COIL PEAKING 8.

PAGE 56

Service part list z_loc z_parts_code parts_name AWG22 1/0.65 TIN COATING M171 4851715100 TERM ANT AS 58002+32013 WIRE COPPER AWG22 1/0.65 TIN COATING M171A 7173301212 SCREW TAPPTITE TT2 BIN 3X12 MFZN BK 85801065GY 85801065GY WIRE COPPER WIRE COPPER AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING M171B 7172401412 SCREW TAPPTITE TT2 TRS 4X14 MFZN BK RN11 RD-4Z152J- R CARBON FILM 1/4 1.5K OHM J M301 M301A 4953000100 7178301212 BRKT TUNER SCREW TAPPTITE EGI T0.

PAGE 57

Service part list z_loc z_parts_code parts_name parts_descr CC207 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC208 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC209 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC210 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC211 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC212 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC213 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC214 HCFF474KBA C CHIP CERA 16V Y5V 0.

PAGE 58

Service part list z_loc z_parts_code parts_name parts_descr CC713 HCBK103KBA C CHIP CERA 50V X7R 0.01MF K 1608 CC714 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC715 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC716 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC717 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC718 HCBK104KBA C CHIP CERA 50V X7R 0.1MF K 1608 CC719 HCBK103KBA C CHIP CERA 50V X7R 0.01MF K 1608 CC720 HCBK104KBA C CHIP CERA 50V X7R 0.

PAGE 59

Service part list z_loc z_parts_code parts_name parts_descr DC701 DBAV99L—B DIODE CHIP DC702 DBAV99L—B DC703 remark z_loc z_parts_code parts_name BAV99L ICB01 1UPD64083Q IC CHIP Y/C SEPERAT UPD64083GF DIODE CHIP BAV99L ICB02 1M29372MPD IC CHIP REGULATOR LM2937IMP-2.

PAGE 60

Service part list z_loc z_parts_code parts_name parts_descr QC207 T2SC2412KB TR CHIP 2SC2412K-T146-BR QC208 T2SC2412KB TR CHIP 2SC2412K-T146-BR QC209 T2SC2412KB TR CHIP 2SC2412K-T146-BR QC210 T2SC2412KB TR CHIP 2SC2412K-T146-BR QC211 T2SA1037KB TR CHIP QC281 T2SC2412KB QC702 remark z_loc z_parts_code parts_name RC210 HRFT472JBA R CHIP 1/10 4.

PAGE 61

Service part list z_loc z_parts_code parts_name 1/10 100 OHM J 1608 RC615 HRFT220JBA R CHIP 1/10W 22 OHM J 1608 R CHIP 1/10 4.7K OHM J 1608 RC616 HRFT101JBA R CHIP 1/10 100 OHM J 1608 HRFT102JBA R CHIP 1/10 1K OHM J 1608 RC617 HRFT162JBA R CHIP 1/10 1.6K OHM J 1608 RC258 RC259 HRFT102JBA HRFT000-BA R CHIP R CHIP 1/10 1K OHM J 1608 1/10 0 OHM 1608 RC618 RC619 HRFT101JBA HRFT162JBA R CHIP R CHIP 1/10 100 OHM J 1608 1/10 1.

PAGE 62

Service part list z_loc z_parts_code parts_name parts_descr RC738 HRFT102JBA R CHIP RC739 HRFT102JBA RC740 remark z_loc z_parts_code parts_name 1/10 1K OHM J 1608 RC782 HRFT472JBA R CHIP 1/10 4.

PAGE 63

Service part list z_loc z_parts_code parts_name 1/10 2.2K OHM J 1608 A001 4859815892 PCB MAIN 330X246 FR-4 2L 1.6T R CHIP 1/10 22K OHM J 1608 C202 CEXF1E101V C ELECTRO 25V RSS 100MF (6.3X11) TP HRFT224JBA R CHIP 1/10 220K OHM J 1608 C203 CEXF1E101V C ELECTRO 25V RSS 100MF (6.3X11) TP RCB25 RCB26 HRFT221JBA HRFT222JBA R CHIP R CHIP 1/10 220 OHM J 1608 1/10 2.

PAGE 64

Service part list z_loc z_parts_code parts_name parts_descr C707 CEXF1H220C C ELECTRO 50V RUS 22MF (5X11) TP C708 CEXF1H478V C ELECTRO 50V RSS 0.

PAGE 65

Service part list z_loc z_parts_code parts_name YFW500-635 CF21 CEXF1C102V C ELECTRO 16V RSS 1000MF (10X20) TP CONN WAFER YFW500-635 CV15 CCXB3D221K C CERA 2KV B 220PF K (TAPPING) 4959202620 CONN WAFER YFW500-635 CV21 CEXF2C100V C ELECTRO 160V RSS 10MF (10X16) TP PA401 PA402 4850711S01 4850710S03 CONNECTOR CONNECTOR YH025-11+YBNH250-11+ULW=100 YH025-10+YBNH250-10+ULW=100 CV24 CEXF2C220V C ELECTRO 160V RSS 22MF (10X20) TP ZZ200 PTDEJBG018 PCB DEF M-10 AS DSJ-5510CRK PA403 485

PAGE 66

Service part list z_loc z_parts_code parts_name parts_descr z_loc z_parts_code parts_name E432 4856310300 EYE LET BSR T0.2 (R1.6) remark RF46 RF01Z278K- R FUSIBLE 1W 0.27 OHM K (TP) E433 4856310300 EYE LET BSR T0.2 (R1.6) RF47 RF01Z278K- R FUSIBLE 1W 0.27 OHM K (TP) E434 4856310300 EYE LET BSR T0.2 (R1.6) RV13 RS02Z471JS R M-OXIDE FILM 2W 470 OHM J SMALL E435 E436 4856310300 4856310300 EYE LET EYE LET BSR T0.2 (R1.6) BSR T0.2 (R1.

PAGE 67

Service part list z_loc z_parts_code parts_name parts_descr C429 CMXM2A104J C MYLAR 100V 0.1MF J (TP) C431 CMXL1J154J C MYLAR 63V MEU 0.15MF J C433 CMXM2A822J C MYLAR 100V 8200PF J (TP) C434 CMXL1J104J C MYLAR 63V MEU 0.1MF J C435 CMXE2A103G C MYLAR C453 CEXF1C101V C454 remark z_loc z_parts_code parts_name Q411 TKTC1026Y- TR KTC1026Y (TP) Q412 TKTC3198Y- TR KTC3198Y Q413 TKTA1277Y- TR KTA1277Y 100V PU 0.

PAGE 68

Service part list z_loc z_parts_code parts_name 1N4148 (TAPPING) J429 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING DIODE RGP15J DO-204AC 600V 1.5A J430 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING DRGP15J—- DIODE RGP15J DO-204AC 600V 1.5A J431 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING DF13 DF18 DRGP15J—D1N4148—- DIODE DIODE RGP15J DO-204AC 600V 1.5A 1N4148 (TAPPING) J432 J433 85801065GY 85801065GY WIRE COPPER WIRE COPPER AWG22 1/0.65 TIN COATING AWG22 1/0.

PAGE 69

Service part list z_loc z_parts_code parts_name parts_descr AWG22 1/0.65 TIN COATING R306 RD-AZ102J- R CARBON FILM 1/6 1K OHM J WIRE COPPER AWG22 1/0.65 TIN COATING R308 RN-AZ5601F R METAL FILM 1/6 5.6K OHM F 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING R309 RN-AZ6801F R METAL FILM 1/6 6.8K OHM F J472 J473 85801065GY 85801065GY WIRE COPPER WIRE COPPER AWG22 1/0.65 TIN COATING AWG22 1/0.65 TIN COATING R310 RD-AZ222J- R CARBON FILM 1/6 2.

PAGE 70

Service part list z_loc z_parts_code parts_name parts_descr R434 RD-AZ102J- R CARBON FILM R435 RD-AZ472J- R436 remark z_loc z_parts_code parts_name parts_descr 1/6 1K OHM J R479 RD-AZ101J- R CARBON FILM 1/6 100 OHM J R CARBON FILM 1/6 4.7K OHM J R480 RD-AZ101J- R CARBON FILM 1/6 100 OHM J RD-AZ163J- R CARBON FILM 1/6 16K OHM J R481 RD-AZ122J- R CARBON FILM 1/6 1.2K OHM J R437 R438 RN-AZ1101F RD-AZ103J- R METAL FILM R CARBON FILM 1/6 1.

PAGE 71

Service part list z_loc z_parts_code parts_name parts_descr RF407 RD-AZ364J- R CARBON FILM RF408 RD-AZ102J- RF409 remark z_loc z_parts_code parts_name 1/6 360K OHM J C831 CEYF2C221V C ELECTRO 160V RSS 220MF (18X35.5) R CARBON FILM 1/6 1K OHM J C832 CEYF2C221V C ELECTRO 160V RSS 220MF (18X35.5) RD-AZ102J- R CARBON FILM 1/6 1K OHM J C858 CEYF1E332V C ELECTRO 25V RSS 3300MF (16X31.

PAGE 72

Service part list z_loc z_parts_code parts_name LTV-817C R812 RX10T339J- R CEMENT 10W 3.3 OHM J TRIPOD IC PHOTO COUPLER LTV-817C R820 RW02Z158JN R WIRE WOUND 2W 0.15 OHM J NON-INDUCT 1SE135N—- IC AMP SE135N R828 RW02Y158FS R WIRE WOUND 2W 0.15 OHM F SMALL I807 807A 1K1A7805P1 4857027802 IC REGULATOR HEAT SINK KIA7805API AL EX R833 RLY1 RW02Y158FS 5SC0202334 R WIRE WOUND SW RELAY 2W 0.15 OHM F SMALL DJ5D2-0(M)-0.

PAGE 73

Service part list z_loc z_parts_code parts_name parts_descr C856 CEXF1C332V C ELECTRO 16V RSS 3300MF (16X25) TP C857 CEXF1C332V C ELECTRO 16V RSS 3300MF (16X25) TP C861 CEXF1E102V C ELECTRO 25V RSS 1000MF (13X20) TP C862 CEXF1E102V C ELECTRO 25V RSS 1000MF (13X20) TP C863 CEXF1E102V C ELECTRO 25V RSS 1000MF (13X20) TP C864 CEXF1E102V C ELECTRO 25V RSS 1000MF (13X20) TP C865 CEXF1C332V C ELECTRO 16V RSS 3300MF (16X25) TP ZZ200 PTPWJBG003 PCB POWER M-10 AS DSJ-5510CRA E801

PAGE 74

Service part list z_loc z_parts_code parts_name BSR T0.2 (R1.6) C876 CCXB3A102K C CERA 1KV B 1000PF K (TAPPING) EYE LET BSR T0.2 (R1.6) C877 CCXB3A102K C CERA 1KV B 1000PF K (TAPPING) 4856310300 EYE LET BSR T0.2 (R1.6) C878 CCXB3A102K C CERA 1KV B 1000PF K (TAPPING) E875 P801 4856310300 4857417500 EYE LET TERM PIN BSR T0.2 (R1.6) DA-IB0214(D2.

PAGE 75

Service part list z_loc z_parts_code parts_name parts_descr D815 DRGP15J—- DIODE RGP15J DO-204AC 600V 1.5A D817 D1N4148—- DIODE 1N4148 (TAPPING) D822 DRU1P——- DIODE RU1P D823 DRGP15J—- DIODE RGP15J DO-204AC 600V 1.5A D824 DRGP15J—- DIODE RGP15J DO-204AC 600V 1.5A D825 DUZ6R2BM— DIODE ZENER UZ-6.2BM D830 DRGP15J—- DIODE RGP15J DO-204AC 600V 1.5A D831 DRGP15J—- DIODE RGP15J DO-204AC 600V 1.5A D833 DRGP15J—- DIODE RGP15J DO-204AC 600V 1.

PAGE 76

Service part list z_loc z_parts_code parts_name parts_descr R826 RD-4Z824J- R CARBON FILM 1/4 820K OHM J R827 85801065GY WIRE COPPER AWG22 1/0.65 TIN COATING R831 RD-2Z103J- R CARBON FILM 1/2 10K OHM J R837 RD-4Z222J- R CARBON FILM 1/4 2.2K OHM J R838 RD-4Z203J- R CARBON FILM 1/4 20K OHM J R839 RD-4Z102J- R CARBON FILM 1/4 1K OHM J R840 RD-4Z103J- R CARBON FILM 1/4 10K OHM J R849 RC-2Z565KP R CARBON COMP 1/2 5.