Operating Instructions

8
OPERATION PROCEDURE
This section includes useful information about oven operation.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the Power button. The chart shows the display, the power level and the
percentage of power.
Plug power supply cord into a standard 3-pronged
12 Amp, 120V AC 60Hz power outlet.
After placing the food in a suitable container, open
the oven door and put it on the glass tray.
The glass tray and roller guide must always be in
place during cooking.
Close the door. Make sure that it is firmly closed.
The oven light is on when the microwave oven is
operating.
The oven door can be opened at any time during
operation by pulling the handle of door. The oven
will automatically shut off.
Each time a button is touched, a BEEP will sound
to acknowledge the touch.
The oven automatically cooks on full power unless
set to a lower power level.
The display will show “ : 0” when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the Stop/Clear button is touched during the
oven operation, the oven stops cooking and all
information retained. To erase all information(except
the present time), touch the Stop/Clear button once
more. If the oven door is opened during the oven
operation, all information is retained.
If the Start button is touched and the oven does not
operate, check the area between the door and door
seal for obstructions and make sure the door is
closed securely. The oven will not start cooking
until the door is completely closed or the program
has been reset.
1
2
3
4
5
6
7
8
9
10
11
Make sure the oven is properly installed and
plugged into the electrical outlet.
Touch Power button Power level (Display) Approximate Percentage of Power
once P-HI 100%
twice P-80 80%
3 times P-60 60%
4 times P-40 40%
5 times P-20 20%
WOR09R1NER~(EN)_WINIA.indd 8 2020-11-02 �� 5:15:16