ACP-5010RDS CD Player/Receiver with 4-Channel High Power Output Flip Down Detachable Face Panel & ISO DIN Mounting Chassis 4-Channel high Power(40W 4Ch) Electronic Tuning Electronic Volume/Bass/Treble/Balance/ Fader 42Memory Capability (18FM + 12MW + 12LW) Loudness & Mute Controls Detachable Face for Anti-Theft Panel Carrying Case Included ISO DIN Chassis for Easy Installation INSTRUCTION MANUAL
WIRING CONNECTIONS The pins in the ISO connector have the following functions (connector seen from the rear) A. ELECTRIC CONNECTIONS 1. T.MUTE : BROWN 4. Back-up+12V : YELLOW 5. +12V (electric antenna) : BLUE 6. Dimmer : PINK 7. +12V supply(from ignition lock) : RED 8. Earth : BLACK B. LOUD SPEAKER 1. +Right Rear 2. - Right Rear 3. +Right Front 4. - Right Front 5. +Left Front 6. - Left Front 7. +Left Rear 8.
HOW TO INSTALL & REMOVE THE APPARATUS NOTE ! Press the release knob to open up the front panel and detach it by pulling it towards you. Use only the supplied mounting hardware for safe and secure installation. Please consult your nearest dealer if you get any problems with installation. Insert the enclosed handles into the slits of the unit, as illustrated, while pressing the handle lightly, then pull the unit out of the holder. HOLDER Insert the holder into the car radio slot.
FRONT PANEL Attaching the front panel 1. Holding the panel at its top and bottom edges. 2. Attach one side of the panel lightly first, then push the other side of the panel into the unit. 3. Do not press the panel hard against the unit. It can be attached by pressing it lightly. And beware not to drop it. Keep in mind: If it works malfunction, take the panel off and put it back again. Do not touch the contact pins on the rear of the front panel, this can cause contact errors.
FUNCTION DESCRIPTION, CONTROLS 1. POWER ON / OFF 2. AUDIO SELECTOR 3. TUNING & TRACK UP / DOWN 4. PRESET BUTTON 5. BAND CONTROL 6. AUT (AUTO TRAVEL PRESET) 7. LOUDNESS CONTROL & LOCAL STATION 8. DISPLAY / PTY 9. REGIONAL / AF 10. TA / TP STANDBY 11. CD BUTTON 12. TOP 13. INTRO SCAN 14. REPEAT 15. RANDOM 16. EJECT 17. LCD 18.
RADIO 1. POWER ON/OFF (POWER In case of CD mode: This button is to track up/down In case of clock mode: This button is to hour/minute up ) To switch the audio system off, press power button lightly. Simultaneously, the system memorizes all information about its current setting, and restores the information when you turn the system on by pressing the power on/off button again. You can also turn the system on by pressing BAND button instead of power button. SOUND CONTROL (POWER, 4.
RADIO 6. AUTO TRAVEL PRESET (AUT, ) 8. DISPLAY CONTROL (DISP, ) Press the AUT button within 1.5 seconds, you can change the radio mode to the AUT function that operates all over the radio band. The display will show you the message “AUT”. To return, press the AUT button within 1.5 seconds again. When pressed belower than 1.5 seconds. present clock is displayed. another key is not pressed during 5 seconds, it is changed priority display states. Press the AUT button for more than 1.
RADIO USING THE RDS FUNCTIONS RDS digital data includes various data : What is RDS? PI ... Program Identification Recognizes the country code and the program of the channel. The RDS(Radio Data System) is a digital information system developed by the EBU(European Broadcasting Union). Pick-abacked on normal FM broadcasts, RDS offers a variety of information services and automatic retuning functions for RDScompatible car stereos. PS ... program Service Name The name of the channel is shown in the display.
RADIO USING THE RDS FUNCTIONS 9. AF(network following) reception (AF, ) This unit returns to the stronger alternative transmitter in the list of alternative frequencies(AF). The display indicates “AF” as confirmation on the display. Thus a motorist can keep listening to the same program. The AF-function is only possible with FM. To select AF-function switch to FM and press the button AF/REG for about 1.5 seconds.
RADIO USING THE RDS FUNCTIONS Change-over to regional program (REG, ) 10. Traffic broadcast recognition (TA, At certain times some national radio stations broadcast regional program. It is possible to pre-tune these station by pressing button REG/AF shortly. The display shows “REG”. Automatically after 5 seconds or by pressing any button the display shows the frequency indication or the name of the chosen program.
RADIO Traffic information recognition (TPST, USING THE RDS FUNCTIONS What is EON? ) If the RDS-station tuned on, the unit recognizes RDS-frequencies with traffic information(TPST). “TPST” will be indicated on the display in reception of one of these frequencies. EON(Enhanced Other Network) is a new RDS service provided by certain station networks. Even if you are tuned in to an RDS station which does not give traffic news, e.g.
RADIO Selecting the PTY function Depress the button for approx. 2 seconds to tune on the PTYfunction. If the station just receives a PTY-program the indication of the program name lights in the display window. If there is no station of program type available at that time, the display shows “NO PTY”.
COMPACT DISC PLAYER To go to the beginning of desired track Track up & Down. Listening to a CD During play, press either the track up ( )or the track down( ) button for less than one second. When you wish to locate a particular program, press the track/tune button in desired direction. Reverse & Fast Forward Open the front panel by pressing the RELEASE (open, Insert a compact disc. Close the front panel. Play will start automatically. If a DISC is already inserted, press the CD button. 11.
COMPACT DISC PLAYER 12. TOP Function (TOP, ) At anytime you want to listen to the title song of disc, press this button softly. Then the CD will be played from the NO.1 track. 13. Intro Scan (INT, MAINTENANCE AND PRECAUTIONS ) Press the INT button to know what songs are on the disc. It starts to play the first 10 seconds of the tracks which are from the next song to the last one, while “INTRO” appears on the display.
COMPACT DISC PLAYER USING THE COMPACT DISC Note: Cleaning discs Do not insert a disc with the label surface down. Doing so may damage the unit. Do not try to insert another disc when one has been already inserted. Handle the disc by its edge, and to keep the disc clean, do not touch the surface. Do not stick paper or tape on disc. Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight where temperatures may be excessive.
SPECIFICATION GENERAL Power requirement Maximum output power Rated output power Current consumption CD PLAYER SECTION System Frequency Total harmonic distortion Signal to noise ratio(A network) Wow and flutter Laser Diode Properties Dimensions (W H D) Escutcheon Body Weight (Net) Controls BASS/TREBLE DC 12.0V / Rated : 14.4V (Usable:10.8 ~15.6V)Negative ground 160watts total 40 watts per channel into 4 ohms (1KHz, 1% total harmonic distortion) 10A Maximum 188 58 15 mm 178 50 165 mm 1.
MEMO 16
MEMO 17
