SERVICE MANUAL DVG - 5300N DVG - 8400N
CATALOG 1.SUMMARIZATION 1-1 IMPORTANT SAFETY PRECAUTIONS……………………………………………………………….1-1 FEATURES ……………………………………………………………………………………….1-6 ABOUT MANUAL……………………………………………………………………………………1-7 TERMS FOR DISCS………………………………………………………………………………..1-8 BEFORE OPERATION………………………………………………………………………………1-10 PREPARATIONS BEFORE OPERATION…………………………………………………………….1-12 CONNECTIONS…………………………………………………………………………………….1-16 BASIC OPERATIONS………………………………………………………………………………1-17 PLAYING A DESIRED SCENE……………………………………………………………………..
4.IC MATERIAL 4-1 MT1369E IC MATERIAL…………………………………………………………………………. 4-2 CS4340 (AUDIO D/A) IC MATERIAL………..………………………………………………... 4-8 AV 3168 (VIDEO) IC MATERIAL ………………………………………………………………4-9 FLASH 29F080 IC MATERIAL…………………………………………………………………... 4-12 CONTROL PANEL IC MATERIAL………………………………………………………………….4-13 16M SDRAM IC MATERIAL…………………………………………………………………….....
IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
IMPORTANT SAFETY PRECAUTIONS This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user. 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated.
IMPORTANT SAFETY PRECAUTIONS your video dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions. 14 DISC TRAY Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury. 11 GROUNDING OR POLARIZATION This unit is equipped with a polarized alternating -current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way.
IMPORTANT SAFETY PRECAUTIONS 20 DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power-supply cord or plug is damaged. B. If liquid has been spilled, or objects have fallen into the unit. C. If the unit has been exposed to rain or water. D. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions.
FEATURES OUTSTANDING SOUND QUALITY Dolby Digital system developed by Dolby Laboratories and DTS developed by DTS Inc., features high quality surround sound, can be played in DVD or CD disc at home, to reproduce high quality sound effects. HIGH DEFINITION The unit adopts MPEG2 coding format and brings the high horizontal resolution. UNIQUE FUNCTIONS Multi-angle and multi-language bring unique trick functions. Parent lock makes it easy to control the content of discs.
ABOUT MANUAL PRINCIPLES FOR WRITING This manual mainly introduces how to use buttons on the remote control. You may operate the unit if the buttons on the unit have the same or similar names as or to those on the remote control.
TERMS FOR DISCS TITLE The images or music of a DVD are divided into some units, among which title is the biggest one. When playing a DVD, the movie is the title. When playing a CD, the combined tracks make up the title. CHAPTER It is smaller than title among the units of a DVD. A title is made up of several chapters , and each chapter has a number for search. But some discs may not have numbered chapters. TRACK In a CD, each track has a number to enable search functions.
TERMS FOR DISCS SCENE The menu pictures, motion and motionless pictures of a CD or something discs with PBC function can be divided into some parts, these parts are scenes. Each scene has a number for search. PBC (PLAYBACK CONTROL) It is signals recorded in a CD or something discs to control playback.
BEFORE OPERATION SECURITY • Before operation, check if the voltage of the unit is in line with the local voltage. • Hold the plug to disconnect it from the mains outlet. Do not pull the power cord. • When the plug of the unit is connected to the mains outlet , the unit will be still connected to AC even if the power is turned off. • Disconnect the plug as soon as liquid or objects enter the unit. The unit can not be used until being checked by experts.
BEFORE OPERATION HANDLING DISC • To keep the disc clean, do not touch the playsides of the disc. • Do not attach paper or tape to the disc. • Keep the disc away from direct sunlight or heat sources. • Store the disc in a disc case after playback. CLEANING DISC • Before playback, wipe the disc outwards from the centre with clean cloth. • Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray.
PREPARATIONS BEFORE OPERATION FRONT PANEL ! STANDBY/ON button To switch the unit On or Off when connected to AC power outlet. @ TRAY DOOR Press OPEN/CLOSE button to open it. # DISPLAY Displays operation status $ PLAY button To play the loaded disc. Press this button to go to the preferred item when the menu is displayed on the TV screen. % PAUSE button Press this button in playback mode, the picture stops. This machine enters the playback pause mode.
PREPARATIONS BEFORE OPERATION REAR PANEL ! AUDIO OUT (L/R TRACK) Two phono sockets for analogue 2 Channel audio in order to a TV or stereo amplifier. @ VIDEO OUT Connects composite video signal to input AV or PHONO sockets of TV or monitor to achieve high fidelity colour reproduction. # COMPONENT(Y.Pb.Pr) Connects to TV or monitor equipped with Component input . In order to achieve a sharper and cleaner picture than that when connected via VIDEO OUT (composite video).
PREPARATIONS BEFORE OPERATION VFD @ ! # CD $ D % ^ PBC ALL & * ( ! Recognized DISC TYPE indicator Illuminates the current operation mode. @ DVD AUDIO STREAM indicator Indicates the audio type of the disc under play is DTS # Recognized DISC TYPE indicator CD. $ DVD AUDIO STREAM indicator Indicates the audio type of the disc under play is DOLBY DIGITAL. % PBC indicator This indicator is lit up in selecting PBC ON while this indicator disappears in selecting PBC OFF.
PREPARATIONS BEFORE OPERATION NAMES AND LAYOUT OF REMOTE CONTROLS * In case of setting the mode by using SETUP menu (for example, AUDIO select in PREFERENCE SETUP), the setting is kept though you switch the unit off and turn it on.
CONNECTIONS Turn off all equipment before operation. The unit has many kinds of output modes like A/V output, S-VIDEO output and digital signal output (COAXIAL, OPTICAL). You may select as you need. CONNECTED TO A TV AND AN ORDINARY AMPLIFIER Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
BASIC OPERATIONS PLAY DISCS 1 Push "POWER" button on the TV and audio system, Push "TV/VIDEO" button on the TV, select VIDEO mode (TV). Select S-Video mode if using an S-VIDEO connection. N ote: The Step2 can be cancelled if you do not connect it to the amplifier. 2 3 4 Select the right audio input on the amplifier. • Each amplifier is different from another, please refer to the manual of the amplifier. (e.g., connect the audio output of the DVD player to the DVD audio input of an amplifier.
BASIC OPERATIONS SYSTEM SETTING According to the system of the TV to be connected, set the system of the unit to make it match the TV. Push SYSTEM button on the remote control, then choose TV TYPE. • If the system of the TV is PAL, push "SYSTEM" once. • If the TV is multi-system, push "SYSTEM" twice. • If the system of the TV is NTSC, push "SYSTEM" three times. SYSTEM If the TV has component input, please connect the unit and the TV with component cord (not supplied).
BASIC OPERATIONS FAST PLAY When playing disc, you may play it forward fast or reverse it fast to find what you need. N ote: Push PLAY to play normally when playing fast. 1 Push to play forward fast. Each time you push the button, the speed of picture changes like the right sides. N ote: The marked FAST PLAY speed on owner’s manual and real fast play speed can be different depending on which disc you play. 1 X2 2 X4 3 X8 4 X16 5 X32 (DVD only) 6 2 Push to reverse the disc fast.
BASIC OPERATIONS SELECT AUDIO LANGUAGE You can choose the language according to your choice when playing mulitlanguage DVD. Press “AUDIO” button, select different languages. N ote: AUDIO 1. Different disc has different languages 2. You can push "AUDIO" button to choose the language you want when you play multi-language DVD discs.
PLAYING A DESIRED SCENE TO SKIP SCENES IN A DISC 1 2 Push to move to next chapter (or track). The current chapter (or track) moves to the next chapter (or track). Push to move to previous chapter (or track). The current chapter (or track) moves to the previous chapter (or track) or first scene of current chapter (or track). DIRECTLY MOVING TO A DESIRED TITLE (DVD) Some movie discs may contain multiple titles.
PLAYING A DESIRED SCENE PLAYING A DISC CONTAINING MP3 FILES 1 When a MP3 disc is loaded, MP3 menu screen is displayed automatically depending on MP3 disc’s folder structure. 2 Use the direction button to select the folder you want to play, by pressing [PLAY] button. This button allows you to see the file lists under the folder. 3 Use the direction button and select a MP3 title using the PLAY button then play will start automatically.
PLAYING A DESIRED SCENE REPEATING A DEFINED PERIOD FROM A TO B You may press A-B to enjoy some parts repeatedly when playing a disc. N ote: A MP3 disc may not be repeated from A to B. 1. Press “A-B” to set a starting point A. 2. Press “A-B” twice to an end point B. Afterwards, the unit plays from A to B. 3. Press “A-B” three times to remove A-B repeat.
PLAYING A DESIRED SCENE SEARCHING CD AND SOMETHING DISC WITH A TIME OR TRACK TIME You may directly enter a disc or track time to search fast on a disc. The unit plays from the point. 1 If you want to search with a disc time, press [SEARCH] button one time. Please enter the new time to be searched using the [NUMBER] buttons. 2 If you want to search with a track time of CD, press [SEARCH] button twice. Please enter the new time to be searched using the [NUMBER] buttons.
PLAY DISCS IN VERIOUS WAYS SELECT ANGLE N ote: Multi Angle function is limited to a DVD disc supporting multi angle information. Some discs have images with different screen angles, you may select among them. For example, when you watch a running train, you may select to watch it from the front, the left window or the right window without stopping it. Keep pressing [ANGLE] button till the preferred angle appears.
PLAY DISCS IN VERIOUS WAYS PROGRAM PLAY (DVD) You may program the title and chapter on a disc and play them in the programmed order. 1 Push "PROGRAM" button, the screen shows: PROGRAM PROGRAM:TT(05) / CH (- -) 01 02 03 04 05 TT: TT: TT: TT: TT: CH CH CH CH CH 06 07 08 09 10 TT: TT: TT: TT: TT: EXIT N ote: First one is title, second one is chapter. 2 Input the sequence number you want to program playing.
PLAY DISCS IN VERIOUS WAYS DIGEST PLAY (DVD) 1 Push "INTRO" button when the unit is playing disc, the screen shows : 2 Push direction button to select the digest type. SELECT DIGEST TYPE : TITLE DIGEST CHAPTER DIGEST TITLE INTERVAL CHAPTER INTERVAL INTRO N ote: • TITLE DIGEST The player will play 5 seconds each title. After moving the cursor in the position “--”, push NUMBER button to select the title and push PLAY button. Then the player will begin to play from the title you selected.
PLAY DISCS IN VERIOUS WAYS PLAY MP3 OR PIC-CD DISC USE NUMBER BUTTONS TO SELECT TRACKS (MP3 OR PIC-CD) 1 The screen will display as right after the disc is loaded 2 Each time you press PROGRAM button, NORMAL MODE, PROGRAM LIST and FILE LIST appear one by one. At this time you can operate the Program play of the item in the program list. 3 You can scan all the directors on the disc by using direction button. You can play the directory you selected by the number button.
PLAY DISCS IN VERIOUS WAYS SELECT PLAYING MODE (MP3 OR PIC-CD) 1 Push direction button to select the play mode area under stop status, then push direction button to select different play mode.
FUNCTION SETTING MENU SETTING According to the recorded information and external equipment, set the following functions for DVD to obtain the best playing status. Push "SETUP" button to set the main menu.
FUNCTION SETTING 31
FUNCTION SETTING BASIC NAVIGATION To navigation through the setting on the screen, use the direction buttons to scroll through the list of settings and use “PLAY” button to select the high lighted function. SETUP MENU Press the SETUP button to enter the On Screen Display and to exit at any time. In each of the menus, selecting MAIN PAGE (SETUP menu) will immediately return you to the initial screen. GENERAL SETUP TV TYPE You may select according to the colour system of the TV to be connected.
FUNCTION SETTING ANGLE MARK This only works when there is an angle mark on the disc. • Select "ON", the screen shows the mark when playing a DVD. • Select "OFF", the mark is not shown. N ote: “OSD” means “On Screen Display”. OSD LANGUAGE When select a language, the screen show this language. • ENGLISH/ SPANISH/ ITALIAN/ FRENCH/ DUTCH/ GERMAN/ PORTUGUESE For example, if you select ENGLISH, the OSD is in English. AUDIO OUTPUT • SPDIF OFF No signal is output from the coaxial, optical port.
FUNCTION SETTING DOLBY DIGITAL SETUP DUAL MONO This is the output mode of the L and R signals of the set audio output. If it is set to "MIX MONO", the function only works when the DVD being played is 2.0-channel. • LT/RT Choose this function when play the disc with DOLBY PRO LOGIC stereo function, this model can decode this disc, let you enjoy the perfect drama at home. • STEREO Choose this option, the audio output should be dummy stereo signal.
FUNCTION SETTING DISC MENU • Selecting Disc Menu language. Please set it as the preferred DISC MENU language. In case the DISC MENU language is set and recorded in the DISC, it is automatically played in the set language in every playing. For example, English is set and recorded as a DISC MENU language in the DISC, it is played in English. PARENTAL N ote: The password is set by yourself. The content of a disc with lock function is evaluated by grades. You can select an age grade as your need.
OTHERS TON CONTROL You may change the pitch to adapt to your voice # • Push to raise the pitch. Each time you push the button, the pitch is raised by one step. It can be raised by 7 steps at the most. • Push to lower the pitch. b Each time you push the button, the pitch is lowered by one step. It can be raised by 7 steps at the most. • Retune to the preliminary atonic-tone.
OTHERS TROUBLESHOOTING If you experience the following problems while using the unit, this troubleshooting guide can help you. • NO SOUND - Check if the unit is connected securely. - Make sure you operate the TV or amplifier correctly. • NO IMAGE , IMAGE ROLLS AND NO COLOR - Check if the unit is connected securely. - Make sure you operate the TV correctly. - Make sure you set the color system correctly. • BAD SOUND QUALITY - Make sure the audio output mode is set correctly.
OTHERS TECHNICAL SPECIFICATIONS Laser wavelength 650nm Video PAL/AUTO/NTSC Frequency response Signal/noise ratio 20Hz ~ 20KHz (±1dB) ≥ 90dB Channel separation ≥ 85dB ( 1KHz) Dynamic range ≥ 80dB ( 1KHz) Analog output level : 2.0 + 0/-0.2Vrms (Load impedance : 10KΩ) Digital output level : 0.5 ± 0.1Vp-p (Load impedance : 75Ω) Output Audio Composite output level : 1.0 ± 0.
2. REPLACE PARTS REPLACE CHASSIS ................................................................................................................ 2-2 TOP COVER ....................................................................................................................... 2-2 FRONT PANEL................................................................................................................... 2-3 BACK PANEL.......................................................................................
NOTICE: 1. There are some malfunctions because of the influence from static electricity, so you should properly earth. 2. This system includes lots of screws, please operate with magnetic screwdriver in order to prevent dropping screws. You should pay more attention to some special screws, which puts the screw on mold. The screw-socket will be damaged if you operate in wrong way, then the components couldn’t be fixed in a good way. REPLACE CHASSIS TOP COVER 1.
FRONT PANEL 1. 2. 3. 4. Draw out three flexible cables 1 Unscrew five screws 2 Pull out claws 3 Dismantle front panel 4 SC REW S ( 2 ) F RO NT PAN EL ( 4 ) F LE XIBL E CA BL ES (1 ) CL AWS ( 3) SC REW S ( 2 ) SC REW S ( 2 ) 2-2 BACK PANEL 1. Draw out power supply wires 1 2. Unscrew eight screws 2 3.
REPLACE PCB BOARD MAIN PC BOARD NOTICE: to make sure the output protect point of laser diode is short before you dismantle main PC board (3). After you replace main PC board, insert flexible cables and open protect point. 1. Draw out six flexible cables (1). 2. Unscrew six screws (2). 3. Dismantle Main PC board (3). FL EXIBL E CABLES (1 ) SCREWS (2 ) M AIN P C BOARD (3) 2-4 POWER SUPPLY PC BOARD 1. Draw out flexible cables 1 2. Unscrew five screws 2 3.
VFD POWER SWITCH PC BOARD 1. 2. 3. 4. Unscrew six screws (1). Dismantle VFD power switch PC board (2). Unscrew two screws (3) Dismantle stand by PC board (4). STAND BY PC BOARD (4) SCREWS (3) SCREWS (1) VFD POWER SWITCH PC BOARD (2) 2-6 MIC PC BOARD 1. Dismantle front panel (reference to 2-2). 2. Unscrew two screws (1). 3.
COMPONENT PC BOARD 1. Draw out flexible cables 1 2. Unscrew one screw (2). 3.
REPLACE DVD LOADER NOTICE: To make sure the output protect point of laser diode is short before you draw out joint and soft cable. After you replace mechanical chassis parts and insert joint and soft cable, then open protect point. 1. Draw out flexible cables (1) 2. Unscrew four screws (2) 3. Dismantle DVD loader (3).
3. OVERHAUL FLOWCHART DECODING BLOCK DIAGRAM ............................................................................ 3-2 BLOCK DIAGRAM ................................................................................................... 3-3 CONTROL SCHEMATIC CIRCUIT DIAGRAM .................................................. 3-4 POWER SCHEMATIC CIRCUIT DIAGRAM ....................................................... 3-5 MT1369AE INDEX & POWER.................................................................
DECODING BLOCK DIAGRAM 27M XTAL Oscillator S-Video Flash 29F800 AV3168 Video Encoder MPEG MTK 1369AE Video LPF Video Optical Audio D/A 8726/4340 Amplifier L R 4M SDRAM Mute Circuit 4M SDRAM Display VFD KEY 3-2
GND S5V 3.
CONTROL SCHEMATIC CIRCUIT DIAGRAM 1 2 3 4 6 5 D D ~3.6V +5V X1 455E +5V U1 1 2 R1 4.7K C3 104 0E SW1 SW2 SW3 SW4 Dout Din Vss CLK STB K1 K2 UPD16312 G5 G6 S16 S15 S14 S13 VEE S12 S11 S10 S9 33 32 31 30 29 28 27 26 25 24 23 K3 K4 Vdd S1 S2 S3 S4 S5 S6 S7 S8 C1 104 1 2 3 4 5 6 OSC Vss LED1 LED2 LED3 LED4 Vdd G1 G2 G3 G4 1 2 3 4 5 6 7 8 9 10 11 R7 MPEG +5V IR GND VFD-CLK VFD-CS VFD-DATA C4 150 U2 +5V C C5 150 R6 4.
POWER SCHEMATIC CIRCUIT DIAGRAM 1 2 3 4 5 6 C6 P L ! TC 100 11 D7 9 1 D6 6 H u / u 10 / U C9 00 470 R18 D10 C18 470 C16 10V D19 F 00 C14 5T 2 25V 100 50V / U 8 2 220 / U 10 47K R11 220 25V 4 4 U R10 0.22 F4004 / U D9 12 C15 / U 1 1 2 3 4 5 6 7 8 9 H u C24 47 F 25V 10 C12 / U 0 1 U 8 7 6 5 u C23 VCC GD GND ZCD U R19 12K 15V C25 u . D14 INV COMP VFF CS CON4 L1 F4004 26T 10 U U2 L6565 1 2 3 4 D8 13 R12 C 7 0 8 4 4 N I D15 1 1.
MT1369AE INDEX & POWER GVG1369M6-2.5 MT1369E (LQFP208) DVD MP Board for Hitachi HOP1120/1200 1 2 3 4 5 INDEX & POWER, RESET RF / SERVO & MPEG - MT1336E / MT1369E MEMORY - SDRAM, FLASH/EEPROM AUDIO -WM8746/8726/4340, VIDEO - AV3168 AV FILTER. NAME TYPE DEVICE NAME TYPE VCC RVCC AVCC V33 DV33 AV33 V25 +5VA +3VV +5VV +12V Digital 5V Servo 5V RF 5V Digital 3.3V Digital 3.3V Servo 3.3V Digital 2.5V Audio 5V Video 3.
MT1369AE MPEG DEMO BOARD MT1336E SERVO AVCC RVCC LDO_AVCC RVCCIN +PS5V R38,R49,R61: FOR 5V MT1336E RFVCC R46,R60,R63: FOR 3V MT1336E TRCLOSE TROPEN ENDM STBY C27 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 0.1u + C28 C30 100u 0.1u MDI1 C46 LDO2 C57 47u LDO_AVCC 22 DD CC BB AA LDO1 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 Q3 8550 390p 0.
MEMORY SCHEMATIC CIRCUIT DIAGRAM U5 U6 [ 1,2,4,5 ] VCC [ 1,2, ] DV33 [ 1,2, ] +5V VCC DV33 +5V [ 1,2,4,5 ] GND GND L10 DMA0 DMA1 DMA2 DMA3 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 DMA11 DBA0 DBA1 23 24 25 26 29 30 31 32 33 34 22 35 20 21 SDCLK SDCKE 38 37 FB SD33 C119 0.1u DV33 DCS# DRAS# DCAS# DWE# +C120 47u 19 18 17 16 RDQM0 15 RDQM1 39 36 40 [ 2 ] DCLK [ 2 ] DCKE DCLK DCKE [2] [2] [2] [2] CAS# RAS# WE# CS# CAS# RAS# WE# CS# [ 2 ] MA[0..11] [ 2 ] BA[0..
VIDEO DAC CIRCUIT DIAGRAM U11 WM8746 +5VA [ 1,4 ] 1 VCC R62 4.7k GND [ 1,2,3,5 ] GND 11 L11 12 13 14 9 FB 1206 +12V [ 1,4 ] +12V +12V +5VA +12V VAUD [2] C136 0.
AV FILTER SCHEMATIC CIRCUIT DIAGRAM R97 3.3k 3 C172 10u NJM4580 SSOP8 A-R C174 1000P +12V SY/Y/R [ 1,2,3,4 ] AGND L19 FB 1206 A_MUTE 1 R100 1K Q12 3904 AGND CN11 SC/U/G CVBS/V/B [ 4 ] CVBS/V/B C175 MICIN R102 18k R101 10k CVBS_SCART + SC/U/G CVBS_SCART + 6 [ 2 ] MUTE 10u R103 10k C179 R1043.
KARAOKE SCHEMATIC CIRCUIT DIAGRAM 3-11
4. IC MATERIAL MT1369E IC MATERIAL .................................................................................................... 4-2 DECAL ......................................................................................................................... 4-2 PIN FUNCTION DESCRIPTION ................................................................................ 4-3 CS4340(AUDIO D/A) IC MATERIAL ................................................................................ 4-8 DECAL ........
MT1369E IC MATERIAL PRST ICE YUV7 YUV6 YUV5 DVDD2 YUV4 YUV3 YUV2 YUV1 YUV0 DVSS HSYN VSYN BLANK# MC_DAT SPDIF APVSS 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 RFIP RFIN RFDTSLVN SCOP SCON RFDTSLVP ADCVDD3 HRFZC RFRPSLV RFRP_AC RFRP_DC RFLEVEL FEI CSO TEI TEZISLV RFSUBI ADIN ADCVSS PDMVSS PWM2VREF PWMVREF PDMVDD3 DVDD3 BDO SLCK SDEN SDATA WOBS
PIN FUNCTION DESCRIPTION Pin Symbol Type 1 IREF Analog Input 2 3 4 5 6 7 8 9 10 11 12 13 14 PLLVSS LPIOP LPION LPFON LPFIP LPFIN LPFOP JITFO JITFN PLLVDD3 FOO TRO TROPENPWM Ground Analog Output Analog Output Analog output Analog Input Analog Input Analog Output Analog Output Analog Input Power Analog Output Analog Output Analog Output 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 PWMOUT2 DVDD2 DMO FMO FG DVSS HIGHA0 HIGHA1 HIGHA2 HIGHA3 HIGHA4 HIGHA5 DVSS H
Pin Symbol Type 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 IOA4 IOA5 IOA6 IOA7 A16 A17 IOA18 IOA19 DMVSS DMVDD3 ALE IOOE# IOWR# IOCS# DVSS UP1_2 UP1_3 UP1_4 UP1_5 UP1_6 DVDD3 UP1_7 UP3_0 UP3_1 INT0# IR DVDD2 UP3_4 UP3_5 UWR# URD# XTALI XTALO DVSS RD7 RD6 RD5 RD4 DVDD2 RD3 RD2 RD1 RD0 RWE# CAS# RAS# RCS# BA0 Inout, Pull Up Inout, Pull Up Inout, Pull Up Inout, Pull Up Output Output Inout Inout Ground Powe
Pin Symbol Type 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 DVDD3 RD15 RD14 RD13 RD12 DVSS RD11 RD10 RD9 RD8 VPVDD3 VCOCIN VPVSS DVSS CLK CLE RA11 RA9 RA8 DVDD2 RA7 RA6 RA5 RA4 DVSS DQM1 DQM0 BA1 RA10 DVDD2 RA0 RA1 RA2 RA3 DVSS RD31 RD30 RD29 RD28 DVDD3 RD27 RD26 RD25 RD24 DVSS DQM3 DQM2 RD23 Power Inout, Pull Up/Down Inout, Pull Up/Down Inout, Pull Up/Down Inout,
Pin Symbol Type 140 141 142 143 144 145 146 147 148 149 150 RD22 DVDD2 RD21 RD20 RD19 RD18 DVSS RD17 RD16 ABCK ALRCK Inout, Pull Up/Down Power Inout, Pull Up/Down Inout, Pull Up/Down Inout, Pull Up/Down Inout, Pull Up/Down Ground Inout, Pull Up/Down Inout, Pull Up/Down Output Inout, Pull Down 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 DVDD3 ASDATA0 ASDATA1 ASDATA2 ACLK APVDD3 APVSS SPDIF MC_DAT BLANK# VSY
Pin Symbol Type 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 PDMVDD3 PWMVREF PWM2VREF PDMVSS ADCVSS ADIN RFSUBI TEZISLV TEI CSO FEI RFLEVEL RFRP_DC RFRP_AC RFRPSLV HRFZC ADCVDD3 RFDTSLVP SCON SCOP RFDTSLVN RFIN RFIP Power Analog Input Analog Input Ground Ground Analog Input Analog Input Analog Input Analog Input Analog Input Analog Input Analog Input Analog Input Analog Input Analog Input Analog Input Power Analog Output Analog Output Analog Output Analog
CS4340(AUDIO D/A) IC MATERIAL DECAL RST 1 16 MUTEC SDATA 2 15 AOUTL SCLK/DEM1 3 14 VA LRCK 4 13 AGND MCLK 5 12 AOUTR DIF1 6 11 FRF_GND DIF0 7 10 VQ DEM0 8 9 FILT+ PIN FUNCTION DESCRIPTION Pin Name # Pin Description RST 1 Reset(Input)-Powers down device. SDATA 2 Serial Audio Data(Input)- Input for two's complement serial audio data. SCLK 3 Serial Clock(Input)-Serial clock for the serial audio interface.
VIDEO AV 3168 IC MATERIAL IREF COMP BIAS VDDA CVBS VSS C VDDA Y VSS VDDA 39 38 37 36 35 34 33 32 31 30 29 DECAL 23 SCD XIN 2 22 VDD MSTR 3 21 HSYN VSS 4 20 VSYN VDD 5 19 PD7 RST 6 18 PD6 17 1 VSS XOUT 16 SCL PD5 24 15 44 PD4 GOUT1 14 ACK PD3 25 13 43 PD2 GOUT0 12 VSS PD1 26 11 42 PD0 VSS 10 CPNT VDD 27 9 41 CK27 VSS 8 PDEN VSS 28 7 40 GCK VREF 4-9
PIN FUNCTION DESCRIPTION Pin Name Pin # Type 11-16 18-19 I HSYN 20 I/O In Slave Mode (MSTR pin is low) Horizontal Synch input. In Master Mode (MSTR pin is high) Horizontal Synch output. VSYN 21 I/O In slave mode (MSTR pin is low) Vertical Sync input. In master mode Vertical Sync output. MSTR 3 I Master Mode; If this pin is high, the chip outputs horizontal and vertical sync signals. Otherwise it receives both horizontal and vertical sync signals.
SCL 24 I Serial bus clock SDA 23 I/0 Serial bus address and data input and output pin. Open drain output. GCK 7 O General Purpose Clock. Clock frequency is determined by the state of GOUT[1:0] when RST pin is low. 00 : 40.5 MHz clock output. 0 1: 54.0 MHz clock output. 1 0: 67.5 Mhz clock output. 1 1: 81.0 MHz CK27 9 O 27 MHz clock output pin. ACK 25 I/O 384*fs Audio clock output pin. Controlled by CR2[1:0] 0 0: 384 * 44.1 KHz (16.934MHz) clock output. 0 1: 384 * 48.0 KHz (18.
FLASH 29F800 IC MATERIAL DECAL PIN FUNCTION DESCRIPTION SYMBOL PIN NAME A0~A18 Address Input Q0~Q14 Data Input/Output Q15/A-1 Q15(Word mode)/LSB addr(Byte mode) CE Chip Enable Input WE Write Enable Input BYTE Word/Byte Selction input RESET Hardware Reset Pin/Sector Protect Unlock OE Output Enable Input RY/BY Ready/Busy Output VCC Power Supply Pin (+5V) GND Ground Pin
CONTROL PANEL IC MATERIAL DECAL PIN FUNCTION DESCRIPTION Pin No. Symbol 6 DIN 5 9 Pin Name Description Data input Inputs serial data at rising edge of shift clock, starting from lower bit. DOUT Data output Outputs serial data at falling edge of shift clock, starting from lower bit. This is N-ch open-drain output pin. STB Strobe Initializes serial interface at rising or falling edge to make Pd16312 waiting for reception of command. Data input after STB has fallen is processed as command.
16M SDRAM IC MATERIAL DECAL V DD DQ0 DQ1 V SSQ DQ2 DQ3 V DDQ DQ4 DQ5 V SSQ DQ6 DQ7 VDDQ LDQM /WE /CAS /RAS /CS A11 A10 A0 A1 A2 A3 V DD 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 50pin TSOP II 400mil x 825mil 0.
PIN FUNCTION DESCRIPTION PIN PIN NAME DESCRIPTION CLK Clock The system clock input. All other inputs are referenced to the SDRAM on the rising edge of CLK. CKE Clock Enable Controls internal clock signal and when deactivated, the SDRAM will be one of the states among power down, suspend or self refresh. CS Chip Select Command input enable or mask except CLK, CKE and DQM BA Bank Address Select either one of banks during both RAS and CAS activity.