Operation Manual
CD / MP3 OPERATION
GENERAL OPERATION
PLAY / PAUSE Press to start playing CD / MP3 disc.
Press again to stop playing CD / MP3 operaon
temporarily.
Press again to resume playback.
SKIP + Press to go to the next track or back to the
previous track.
SKIP - Press and hold while playing unl you nd the
point of the sound.
STOP Press to stop all CD / MP3 operaon.
PLAYBACK
1. Set the “FUNCTION” selector to “CD / MP3 / USB” mode.
2. Open the CD door and place a CD / MP3 disc with the label up on the CD
compartment.
3. Close the CD door.
4. Focus search is performed if disc is inside. Total number of tracks is read and
appears on the display.
5. Playback will start automacally from the rst track.
6. Adjust the “VOLUME” control to the desired level.
7. Press the “PLAY / PAUSE” buon again when you want to stop playback
temporarily.
8. Press the “STOP” buon when nished.
CD / MP3 OPERATION
PROGRAM
Up to 20 tracks of CD disk, 99 tracks of MP3 disc can be programmed for disc play
in any order.
Be sure to press the “STOP” buon before use.
1. Press the “MODE” buon, the display will show “P01” and ash.
2. Select desired track by using the “SKIP +” or “SKIP -” buon. ( You may select a
desired album by pressing “ALBUM” buon for MP3 disc. )
3. Press the “MODE” buon again to conrm desired track into the program
memory.
4. Repeat step 2 and 3 to enter addional tracks into the program memory.
5. When all the desired tracks have been programmed, press the “PLAY / PAUSE”
buon to play the disc in the order you have programmed.
6. Press the “STOP” buon twice to terminate programmed playback.
GB