DDC4000001 Digital Camera Model : DDC400 NOV.
Contents Warning Function Test Troubleshooting Explode diagram Service Parts Lists Packing Diagram Firmware update procedure
2. Warning If you are using AC power adapter, unplug the adapter from the AC power outlet after you have disconnected the camera. Do not touch the power plug during a thunderstorm if you are using the AC power adapter. This may cause an electrical shock. Do not insert or drop metallic or inflammable foreign objects into the camera through access points such as the memory card slot. This may cause a fire or an electrical shock.
3. Function Test TOOL/EQUIPMENT SD card*2, TV, AC adapter, lens-wiping paper USB cable, flower, accessory, computer OPERATION DESCRIPTION ITEM OPERATON DESCRIPTION Part I 1 2 3 4 Part II Take out the camera, open the battery cover and insert SD card. Camera cannot be powered on if insert the battery reversely. Insert battery rightly and power on. Check if can power on normally. Confirm if the FW version is correct during power on process.
C D E F G H Make the spot test of 10 PCS from each section, trigger to take 30 pictures in forced flash mode and confirm if there is any abnormity, such as missing flash, hang on, power off automatically etc. Shift to landscape mode and take a piece of photo towards beyond (more than 3m) in flash off mode.
4. Troubleshooting Item Charge Triggering System Lens system NG point NG Analyzing solution Charging failure 1>. Check if connectors TP45-TP50 of J401 are cold solder, no solder, insufficient solder, short-circuit, wrong solder, and etc. if there is any, remove the abnormity; 2>. If (1) is normal, check if U401 and related components and voltage are normal, remove the abnormity; 3>. If (1), (2) are normal, check if Q402 and T401 are normal, remove the abnormity; 4>.
Aperture shift NG Lens focus failure Lens resolution issue Lens noise Power and Power on failure system (without current) 1>. Check if lens connecting board contact NG, cold solder or insufficient solder, remove the abnormity; 2>. If (1) is normal, check if R80, R81, R82, R83, R85, R86 are cold solder or insufficient solder, remove the abnormity; 3>. If (1), (2) are normal, check if CN1 and CN2 contact well, remove the abnormity; 4>.
Power on without sound/ with abnormal sound The shift between AC power and battery is NG. Display TFT-LCD image and image unstable system TFT-LCD white image 1>. Check if two poles of buzzer are cold solder or broken, remove the abnormity; 2>. Check if buzzer is ok, remove the abnormity; 3>. Check if R15, Q5, R8, R113 are cold solder, insufficient solder or NG, remove the abnormity. 1>. Check if power connector is cold solder, insufficient solder, short circuit or NG, remove the abnormity; 2>.
Others 1>. Check if USB connector is OK, remove the abnormity; 2>. Check if USB_DTC related circuit is OK, remove the abnormity; 3>. Confirm if ASIC and related circuits are OK; remove the abnormity. TV play/ no sound/ 1>. Check if AV connector and R315, C181 are OK, remove the abnormity; noise/ voice too low/ 2>. Check if wires of microphone are solder too high well, remove the abnormity; 3>. Check if microphone is OK; remove the abnormity.
5. Explode diagram 9R 744-3000 9R 747-3100 9Q 334-4600-99 9Q 344-7000 9Q 347-0100 9Q 344-8000 02411-0003-00 9R746-6000 9R 747-4100 9R 744-2000 Reference only Part order; please refer to Sec 6 Service Parts List Any alteration of parts number is conducted by sales representative.
6.
Packing Diagram
Packing Part List No Part name 1 2 3 4 5 6 7 8 9 10 11 12 13 14 HDPE BAG LB ASSURANCE TAPE OUT_CTN PAD, VIVITAR PAD, VIVITAR CD ROM STRAP KIT PAD PAD FCC LB KIT BOX SHEET IM POUCH Part number 04039-023-1 04238-765 9E539-602 9E539-694 9E539-695 9P839-A00 9Q338-000 9Q339-200 9Q339-201 9R738-5000-00 9R739-2400-00 9R739-4800-00 9R739-4000-01 9R739-3000-00
Firmware Update Procedure To update this camera firmware, you will need to have 1. The new firmware file from Premier. 2. One SD card. 3. One card reader. Please follow the steps below to perform the update process: 1. Change the update file name to “DC4345.bin”; 2. Insert a SD card with F/W to the card reader; 3. Plug in the AC adapter into the camera; 4.