User`s guide

6
ReplayTV 5000
13 ETHERNET (10/100BaseT) Connect to a broadband home network, including a router, hub or switch.
14 USB PORT Currently inactive, but in the future will support USB 1.1 connectivity for wireless USB (802.11b) network
devices and room-to-room video streaming between ReplayTV 5000 models and earlier ReplayTV 4000/4500 models. Please
check “www.sonicblue.com/replaytv” for update information.
15 TEL LINE Connect directly to a wall jack.
Turning on ReplayTV
1 Press the ReplayTV Power button on the ReplayTV remote control.
Or
2 Press the POWER button on the ReplayTV front panel.
Putting ReplayTV in Standby Mode
ReplayTV is in standby mode when it is plugged in with the power turned off. ReplayTV will record even if it is in standby
mode.
1 Press the ReplayTV Power button on the remote control.
Or
2 Press the POWER button on the ReplayTV front panel.
:: About Service Activation
A service activation fee is required to begin using your new ReplayTV 5000 Series Digital Video Recorder (“ReplayTV”).You can
choose from two payment options: a one-time fee or monthly payments. Only the ReplayTV unit containing the serial number that
you register is paid for and activated through this process. Other ReplayTV units will require separate activation fee payments.
There is a grace period after your initial connection to the ReplayTV Service, during which time you can use ReplayTV without
having to activate the service. If you do not complete the service activation process and pay the service activation fee, your
ReplayTV will cease to operate until the service is activated and the fee is paid. Please activate your service before the grace period
expires.
An activation key for your ReplayTV will be displayed during the on-screen setup process. To activate the service and pay the acti-
vation fee, have the activation key ready and go to our Web site at www.sonicblue.com/replaytv or call 1-800-480-7149.