DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` A mac001 1200DPI 90LPI HELP LINE Number ; 0870 100 2525 With queries, please quote the page number, reference number and model number.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` i mac001 1200DPI 90LPI Safety Instructions INTRODUCTION Please keep the product’s guarantee sheet and receipt in a safe place. Precautions • Read this booklet carefully. • Make sure the rating of your household electricity supply matches that shown on the back of your product. • Read this page and chapter ‘Setting up your product’ to help you set up and adjust your product correctly. • Do not put the product in a hot or humid place. • Do not open the product.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` ii mac001 1200DPI 90LPI Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` iii mac001 1200DPI 90LPI Important Safeguards 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2 RETAIN INSTRUCTIONS 10 POWER SOURCES The safety and operating instructions should be retained for future reference. 3 HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4 FOLLOW INSTRUCTIONS All operating and use instructions should be followed.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` iv mac001 1200DPI 90LPI Important Safeguards product. 17 DISC Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 18 SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19 DAMAGE REQUIRING SERVICE A. B. C. D. E. F.
DF-T35-37D2P-WB 2006.8.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 2 mac001 1200DPI 90LPI Overview DVD, DVD+R, DVD+RW? What is a DVD? DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 3 mac001 1200DPI 90LPI Overview INTRODUCTION Regional code 2 ALL If the region number on your DVD disc does not correspond to the region number of this player, the disc cannot be played.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 4 mac001 1200DPI 90LPI Overview About DVD Recording Notes on Recording • The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 5 mac001 1200DPI 90LPI Overview To clean the cabinet Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinners, as these might damage the surface of the unit. To obtain a clear picture The DVD Recorder+VCR is a high-tech, precision device.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 6 mac001 1200DPI 90LPI Identification of Controls Front Panel DF-4500P @ ! $ % ^ * & ( @ # ) 12 3 ) 1 23 4 4 # 5 ! DF-4700P $ ^ * % & ( ! STANDBY/ON Turns the DVD Recorder+VCR on and off. @ Cassette Compartment (VCR deck) Insert a video cassette here. # Disc Tray (DVD deck) Insert a disc here. $ VCR EJECT Ejects the tape in the VCR deck. % REC Starts recording. Press repeatedly to set the recording time. ^ STOP Stops playback or recording.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 7 mac001 1200DPI 90LPI Identification of Controls INTRODUCTION Front Panel Display Channel PR23 TV Channel Input mode Au-1 AV1 input F-Au Front AV input Au-2 AV2 input COPY VCR to DVD copying Copy COPY DVD to VCR copying Recording on disc 11:15 Indicates a DVD Timer recording is set. 11:15 Indicates a DVD Timer Recording is in standby mode. REC Indicates the DVD is recording.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 8 mac001 1200DPI 90LPI Identification of Controls Remote Control Turns the DVD Recorder+VCR on and off. - Opens and closes the disc tray in DVD mode. - Ejects the tape in the VCR deck in VCR mode. Selects VCR mode. Selects DVD mode. Switches the DVD Recorder+VCR input to TV tuner, AV1, AV2 or FAV. - Selects numbered options in menus. - Selects TV channels. - Manually adjusts tracking.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 9 mac001 1200DPI 90LPI Identification of Controls INTRODUCTION Stops playback or recording. Skips to the next or previous chapter/track. Starts recording. Press repeatedly to set the recording time. For more details, Refer to One Touch Record (OTR) on page 38. Selects Recording mode: - DVD ; Approx 1 Hour (HQ mode), 2 Hours (SP mode), 4 Hours (EP mode), 8 Hours (SEP mode) - VCR : SP or LP.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 10 mac001 1200DPI 90LPI Identification of Controls Rear panel ! @# ) ! AC Power Cord Plug into a power outlet. @ AUDIO OUT (L, R) Connect to a TV or other equipment with audio inputs. # COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr) Connect to a TV with Component Video (Y Pb Pr) inputs. $ Scart socket 2 Connection of an additional device (satellite receiver, set-top box, video recorder, camcorder, etc.) % Scart socket 1 Connection of a TV set.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 11 mac001 1200DPI 90LPI Connections • Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input. • Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. • Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protection system. Connecting Antenna/Cable 1 2 Disconnect the antenna/cable from the rear of your TV.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 12 mac001 1200DPI 90LPI Connections Connecting a TV Choose one of the following TV connections, depending on the capabilities of your equipment. RF Connection Connect the RF OUT (TO TV) jack on the DVD Recorder+VCR to the antenna in jack on your TV using the supplied 75-ohm RF cable (R). If you use this connection, tune your TV to the DVD Recorder+VCR's RF output channel (CH52).
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 13 mac001 1200DPI 90LPI Connections Connecting an Amplifier/Receiver Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A).
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 14 mac001 1200DPI 90LPI Connections Connecting Optional Equipment To receive audio/video signals from other equipment, connect the AVF jacks on the DVD Recorder+VCR to the audio/video out jacks on your external component, using optional audio/video cables. Jack Panel of Accessory Component (VCR, Camcorder, etc.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 15 mac001 1200DPI 90LPI Initial Installation After successfully connecting your DVD Recorder+VCR to your TV and other devices, this chapter will show you how to complete the initial installation. You must follow the initial installation process to set the time, date, channels, and language preferences for the DVD Recorder+VCR. 2 3 ‘Initial Setup Wizard‘ is displayed on the screen. Make sure the RF cable from your antenna or cable TV jack is connected.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 16 mac001 1200DPI 90LPI Initial Setup Setup Menu Overview The DVD Recorder+VCR Setup menu includes four categories, including: Initial Setup, Disc Operation, Disc Edit and Timer Recording. Press [SETUP], [œ/√] and [ENTER] on the remote control to view the first and second levels of the Setup menu. 1. Initial Setup Screen 2. Disc Operation Screen go to page 16~27. go to page 45~47.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 17 mac001 1200DPI 90LPI Initial Setup 6 Select ‘Reception‘ using [œ/√]. Use […/†] to select the desired broadcast system (Aerial or Cable). Aerial: If you are using a standard antenna to receive channels. Manual Set Standard Reception PAL II Cable Auto Search Fine Tune … -- † Decoder Off PR No. -- 0 Store Channel NAME P-04 Store Cancel Cable: If you are using basic cable to receive channels. 7 Select ‘Auto Search‘ using [œ/√].
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 18 mac001 1200DPI 90LPI Initial Setup Auto Scan The DVD Recorder+VCR has a frequency synthesized tuner capable of receiving up to 119 channels. These include VHF channels 2-20, 74-80, UHF channels 21-69 and CATV channels 1-41. Preparation: Installation Manual Set •Auto Scan Clock Set Adjust channels Connect the DVD Recorder+VCR to the desired type of antenna or cable TV system, as shown in ‘Connecting Antenna/Cable‘ on page 11.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 19 mac001 1200DPI 90LPI Initial Setup Adjust Channels 1 Follow steps 1-2 as shown under ‘Manual Set’. 2 Use […/†] to select ‘Adjust Channels‘. 3 Press [ENTER]. The ‘Adjust channels’ menu appears. 4 Use […/†] to select the PR number you want to adjust. Then press Installation Manual Set Auto Scan Clock Set •Adjust channels … œ√† Choose ENTER OK Exit SETUP [ENTER]. Adjust channels NO.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 20 mac001 1200DPI 90LPI Initial Setup ‘Recording Options’ Settings DVD Record Quality You can set the default DVD recording quality to: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Extended Play - 4 hrs/disc) or SEP (Very Low Quality - 8 hrs/disc). 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 21 mac001 1200DPI 90LPI Initial Setup ‘Language’ Settings OSD Language Select a language for the DVD Recorder+VCR Setup menu and on-screen displays. 1 Language •OSD Lang Disc Menu Subtitle Audio Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. † † Use [œ] and [√] to select ‘Language ‘.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 22 mac001 1200DPI 90LPI Initial Setup ‘Preferences’ / Video Settings 1 Press [SETUP]. The Setup menu appears. Preferences While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. 2 3 4 Use [œ/√] to select ‘Preferences While ‘Preferences ‘. ‘ is selected, press [†] to select ‘Video‘. •Video Audio Parental Ctrl Auto Settings VCR Modulator Out … œ√† Choose TV Aspect Video Output ENTER OK 4:3 PS Interlace SETUP Exit Press [√].
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 23 mac001 1200DPI 90LPI Initial Setup ‘Preferences’ / Audio Settings 1 Press [SETUP]. The Setup menu appears. While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page. 2 3 4 Use [œ/√] to select ‘Preferences While ‘Preferences Preferences Video •Audio Parental Ctrl Auto Settings VCR Modulator Out Digital Output Dynamic Range BItstream ‘. ‘ is selected, press [†] to select ‘Audio‘. … œ√† Choose ENTER OK SETUP Exit Press [√].
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 24 mac001 1200DPI 90LPI Initial Setup ‘Preferences’ / Parental Controls Set Parental Level The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. You can set the parental level from ‘ADULT’ to ‘KID SAFE’. 1 Press [SETUP]. The Setup menu appears. Preferences While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 25 mac001 1200DPI 90LPI Initial Setup Change Password 1 While ‘Preferences ‘ is selected, press [†] to select ‘Parental Preferences Ctrl‘. 2 Video Audio Parental Ctrl Auto Settings VCR Modulator Out Press [√] to select ‘Password‘. Then press [ENTER]. … œ√† Choose 3 The ‘Input Password’ submenu appears. Enter your current 4-digit password then press [ENTER]. 4 Enter a new 4-digit password, then press [ENTER].
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 26 mac001 1200DPI 90LPI Initial Setup VPS/PDC VPS/PDC is a service provided by some stations to enable you to perform Preferences timer recordings precisely even if the broadcaster delays the start time of Video Audio the programme slightly. The time you enter is the VPS/PDC time so this Parental Ctrl Auto Settings Auto Clock Set must match exactly the start time of the programme as advertised.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 27 mac001 1200DPI 90LPI Initial Setup System Information System Information helps service personnel identify key firmware information about your DVD Recorder+VCR in case service is required. System Info Version Loader Version Micom Software … œ√† Choose WP3000000FQ-050813 AA003 A100 1.0.6 ENTER OK SETUP Exit ENTER OK SETUP Exit Restore Defaults If you wish, you can reset the DVD Recorder+VCR to its original factory settings. Reset Press [SETUP].
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 28 mac001 1200DPI 90LPI On-Screen Display Overview The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded disc. To access the On-Screen Display (or OSD), press the [DISPLAY] button. Displaying DVD Information √√ During disc playback, press [DISPLAY] to show information about the current disc. Changing menu options in display menu 1 2 3 Press [DISPLAY] during playback.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 29 mac001 1200DPI 90LPI On-Screen Display Overview Displaying TV Information While watching TV, press [DISPLAY] to display/remove the on-screen display. You would see a screen like the following: PR 1 : - - - STEREO PDC 12:30 SP Changing the TV Audio Channel You can change the TV audio using the [AUDIO] button. Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 30 mac001 1200DPI 90LPI DVD Playback Playing a DVD/VCD 1 Press [OPEN/CLOSE] to open the disc tray. 2 Load your disc in the tray with the playback side down (label side up). 3 Press [OPEN/CLOSE] to close the tray. 4 ‘LOAD’ appears on the front panel display, and playback starts automatically. If playback does not start, press [PLAY (√)]. In some cases, the Disc menu might appear instead.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 31 mac001 1200DPI 90LPI DVD Playback Slow Motion Press [SLOW+] or [SLOW–] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] or [SLOW–] repeatedly, the speed will be set to 1/4, 1/8, 1/16, and normal speed. Changing the Audio Language (DVD) Press [AUDIO] and then press [AUDIO] repeatedly during playback to hear a different audio language or audio track.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 32 mac001 1200DPI 90LPI DVD Playback A-B You can repeat a scene between two points (A and B): 1 2 3 4 5 Press [PLAY/PAUSE] play to the start of the desired scene. Press [A-B] to mark the start point. Use [FF], [NEXT] to search the end point. Press [A-B] to mark the end point. The marked scenes are repeated continuously until you stop the repeat by pressing [A-B] button again.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 33 mac001 1200DPI 90LPI VCR Playback Before You Begin 1 2 Press the [VCR] button to set the remote control to operate the VCR deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the external audio system on and select the input source connected to the DVD Recorder+VCR. Playing a VHS Tape 1 Insert a prerecorded video cassette. If the DVD Recorder+VCR is powered off, it will power on automatically.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 34 mac001 1200DPI 90LPI VCR Playback Special Playback Features Notes on special playback features (EG:FFW or FBWD) Horizontal lines (noise bars) will appear on the TV screen. This is normal. The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc. During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 35 mac001 1200DPI 90LPI Other Disc Playback Audio CD/MP3 PLAYBACK The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs. 1 Insert the CD disc and close the tray. The Audio CD or MP3 CD menu appears on the TV screen after a few moments to load the disc. 2 Use […†] to select a track or a file, then press [PLAY] or [ENTER]. ••• MP3 ••• During playback, the current track's elapsed playing time will appear on the menu.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 36 mac001 1200DPI 90LPI Other Disc Playback 5 6 7 Press [NEXT] or [PREV] to manually skip to the next or previous image. Press [√] (or [œ]) to rotate the image (counter) clockwise. Press [STOP] to exit the slideshow. • When a CD contains both MP3 files and JPEG files, the default Play mode is JPEG image files. • The DVD Recorder+VCR can playback up to 1000 files per disc. • MP3 files encoded below 64kbps are not supported.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 37 mac001 1200DPI 90LPI Basic Recording Recording from TV Follow the instructions below to record a TV program. 1 Turn on the DVD Recorder+VCR and load a recordable disc or tape. Make sure your TV input is set to view the DVD Recorder+VCR. 2 Set the desired Recording mode by pressing [REC MODE] repeatedly. DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), or SEP (Super Long Play - 8 hrs/disc).
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 38 mac001 1200DPI 90LPI Basic Recording One Touch Record (OTR) One Touch Recording allows you to add recording time in fixed increments at the touch of a button. 1 Follow steps 1-4 under Recording from TV. 2 Press [REC (●)] repeatedly to set the length of the recording. Recording starts after the first press. Each subsequent press increases the recording time by 15 minutes (DVD) within the available space or 30 minutes (VCR, to a maximum of 10 hours).
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 39 mac001 1200DPI 90LPI Basic Recording One Touch Copy - DVD to VHS If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. 1 Insert a Disc. Copy to Tape Choose quality and press COPY key: LP SP Insert the disc you wish to copy in the DVD deck and close the disc tray. 2 Insert a VHS Tape. Insert a blank VHS videotape into the VCR deck.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 40 mac001 1200DPI 90LPI Basic Recording One Touch Copy - VHS to DVD You can copy the contents of a VHS tape to a DVD±R or DVD±RW. This allows you to archive your old VHS tapes to DVD. If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not permitted to copy Macrovision encoded tapes. 1 Insert a VHS Tape. Insert the VHS videotape you wish to copy into the VCR deck. 2 Insert a DVD±R or DVD±RW disc.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 41 mac001 1200DPI 90LPI Timer Recording Timer Recording using Manual Set Record Screen The Timer Recording function allows you to record up to 8 programs within a period of one month. 1 Insert recordable media such as DVD±R ,DVD±RW, recordable VHS tape. 2 Press [TIMER]. or Press [SETUP] and select ‘Timer REC’. Then press [ENTER]. DVD Recorder Init Setup ➞ The ‘Timer Recording’ menu appears.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 42 mac001 1200DPI 90LPI Timer Recording • The Timer indicator lights on the front panel display when the DVD Recorder+VCR is ready for the Timer Recording. • The DVD Recorder+VCR will automatically power off when the Timer Recording ends. • There is a short delay when a timer recording finishes to confirm the recorded program.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 43 mac001 1200DPI 90LPI Timer Recording Canceling a Timer Recording You can clear a Timer Recording any time before the recording actually starts. • Use […†] to select the program you want to erase on the Timer Recorder List. Press [■STOP] to delete the program. Stopping a Timer Recording in Progress After a Timer Recording has started, you can still cancel the program by pressing [■STOP] button. To confirm, select ‘OK‘. To cancel, select ‘Cancel‘.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 44 mac001 1200DPI 90LPI Recording from an External Input Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder+VCR’s external inputs. 1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages 11 and 14. 2 Use [ … †] or [INPUT] to select the external input to record from. 3 Load a recordable disc or tape.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 45 mac001 1200DPI 90LPI Disc Operation Disc Initialize • If you load a blank DVD±R (±RW) disc, it will be initialized (formatted to enable recording). • Do not start recording until disc initialization is complete. • If you load a DVD±RW that has already been used you can record a program immediately. Disc Operation in DVD±RW disc For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 46 mac001 1200DPI 90LPI Disc Operation Make Compatible (DVD±RW) 'Make Compatible' for a DVD±RW will automatically create a menu screen for navigating the disc. This menu screen is accessible by pressing [MENU] or [TITLE]. 3 4 5 Press […/†] to select ‘Make Compatible‘. If you want to make the disc compatible, press [ENTER]. Erase Finalize Protect Make Comp Adapt Disc Info _ Disc Operation Select OK Exit …† ENTER DISC Exit To confirm, select ‘OK‘.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 47 mac001 1200DPI 90LPI Disc Operation Disc Operation in DVD±R, DVD-RW disc For recordable DVD media, such as DVD±R and DVD-RW discs, you can manage the disc using the Disc Menu. The DVD±R, DVD-RW Disc Menu allows you to rename your disc or finalize it so it will be compatible with most other DVD players. At first, go to Disc Operation mode. 1 2 Press [SETUP]. The Setup menu appears.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 48 mac001 1200DPI 90LPI Disc Edit Title Menu You can manage the titles on your DVD±R/±RW discs using the Title menu. At first, go to Disc Edit mode. 1 2 Press [SETUP]. The Setup menu appears. DVD Recorder Init Setup ➞ Disc Edit œ √ Select Init Setup Disc Oper Disc Edit Timer REC While ‘Disc Edit‘ is selected, press [ENTER] to go to the Disc Edit page.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 49 mac001 1200DPI 90LPI Disc Edit Divide (DVD±RW) This feature allows you to divide a title into two titles. 2 3 4 5 Select the title to be divided using [ENTER]. 6 7 Press [ENTER] when the preferred picture is on your TV screen. Edit TITLE CH 10 TITLE CH 10 10:20 am 12/21/04 10:34 am 12/21/04 SEP HQ Select ‘Divide’ using [… †] . Press [ENTER] to divide the title. Label Erase Divide Protect Chap Edit Index Pic _ Select 'OK' and press [ENTER] to confirm.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 50 mac001 1200DPI 90LPI Disc Edit Edit Chapters 2 Select the title to be edited using [ENTER]. 3 Select ‘Chap Edit’ using [… †] . 4 Press [ENTER] to edit the chapters. 5 Select 'OK' and press [ENTER] to confirm. Edit TITLE CH 10 TITLE CH 10 The Chapter Edit Menu will be displayed. Use [œ √…†] to select one of the various chapter marker functions (Add, Delete, or Hide). 7 Press [ENTER] to confirm.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 51 mac001 1200DPI 90LPI Troubleshooting Check the following guide for the possible cause of a problem before contacting customer support. Symptom Cause Solution No power. The power cord is disconnected. No picture. The TV is not set to receive DVD Recorder+VCR signal output. Plug the power cord into the wall outlet securely. Select the appropriate video input on the TV so the picture from the DVD Recorder+VCR appears on the TV screen.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 52 mac001 1200DPI 90LPI Troubleshooting Symptom Cause The disc was not finalized (or not made compatible if using a DVD+RW). Some players will not play even a finalized disc. Discs recorded with copy-once material cannot be played on other players. The remaining blank space on the Cannot record or did not disc is insufficient. record successfully. The source you are trying to record is copy-protected.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 53 mac001 1200DPI 90LPI Troubleshooting Moisture Condensation Moisture condensation can occur: In locations where moisture condensation may occur: When the DVD Recorder+VCR is moved from a cold place to a warm place. Keep the DVD Recorder+VCR plugged into an AC power outlet with the power on. This will help prevent condensation. Under extremely humid conditions. When condensation has occurred, wait a few hours for the DVD Recorder+VCR to dry before using it.
DF-T35-37D2P-WB 2006.8.24 4:57 PM ˘ ` 54 mac001 1200DPI 90LPI Technical Specifications General Power requirements 200–240V~, 50/60Hz Power consumption Maximum 26W Dimensions (approx.) 430 *92 *312 (w*h*d) Mass (approx.) 4.96 Kg Operating temperature 5°C to 35°C Operating humidity 5% to 90% Signal system PAL Frequency response DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz Video S/N More than 60dB Audio S/N More than 90dB Harmonic distortion Less than 0.
SURNAME The information provided will be held on computer by the DAEWOO Registration Department of Domestic & General Insurance Co. Limited for the provision of warranty insurance or product related purposes. The information will not be disclosed to third parties, should you prefer not to receive product related details writes to Domestic & General Insurance Co. DAE REG / 295 Limited, on the address overleaf. TODAY DATE OF PURCHASE TEAR OFF HERE AND RETURN MODEL No.
1200DPI 90LPI mac001 ` 56 ˘ 2006.8.24 4:57 PM DF-T35-37D2P-WB DAEWOO GUARANTEE CONDITIONS This product is guaranteed for 12 months from the date of original purchase. Any defect that arises due to faulty materials or workmanship will be repaired free of charge during this period by the dealer from whom you purchased the unit. The guarantee is subject to the following provisions.