HDD/DVD Recorder DG-M23E1D/M13E1D User Manual Downloaded From Disc-Player.
Safety Instructions INTRODUCTION Please keep the product’s guarantee sheet and receipt in a safe place. Precautions • Read this booklet carefully. • Make sure the rating of your household electricity supply matches that shown on the back of your product. • Read this page and chapter ‘Setting up your product’ to help you set up and adjust your product correctly. • Do not put the product in a hot or humid place. • Do not open the product. Get a qualified technician to carry out any repairs.
Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage‘ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
Important Safeguards 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2 RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3 HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4 FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5 CLEANING Unplug this unit from the wall outlet before cleaning.
Important Safeguards product. 17 DISC Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 18 SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19 DAMAGE REQUIRING SERVICE A. B. C. D. E. F.
Table of Contents Recording Safety Instructions ____________________________1 Important Safeguards _________________________2 Table of Contents ______________________________5 Overview ______________________________________6 Identification of Controls ______________________10 Basic Recording________________________________40 Connections Connecting Antenna/Cable ____________________15 Connecting a TV _______________________________15 Connecting an Amplifier/Receiver _____________16 Connecting Optional Equ
Overview Overview Which discs you can use Time Shifting The following discs can be used in your HDD/DVD Recorder: : Simultaneous video recording and playback • Pause and resume the live TV broadcast.
Overview DVD, DVD+R, DVD+RW? Supporting Disc ±RW / ±R Recording Format ±Disc + VR format Finalize -RW, -R, +R After finalising other DVD playback What is a DVD? All discs can playback Consumer Does not need selection (recording format) Remark : A DVD Recorder that supports ‘dual media’ recording allows DVD+RW format recording (+VR) on either DVD-R, DVD-RW, DVD+R or DVD+RW media. Any editing feature that is available with the +RW logical format is available on any of the media types.
Overview What is DV? Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the HDD/DVD Recorder using a single DV cable for input and output of audio, video, data and control signals. The i.LINK interface is also known as IEEE 13941995. ‘i.LINK’ and the ‘i.LINK’ logo are trademarks. • The HDD/DVD Recorder is only compatible with DV-format (DVC-SD) camcorders. Digital satellite tuners and Digital VHS video recorders are not compatible.
Overview Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). Handling the Unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback.
Identification of Controls Front Panel $ ! @ # %^ & *() 12 ! Disc Tray (DVD deck) Insert a disc here. @ Front Panel Display Shows the current status of the HDD/DVD Recorder. # OPEN/CLOSE (DVD) Opens or closes the disc tray. $ STANDBY/ON Turns the HDD/DVD Recorder on and off. % SELECT DVD/HDD Toggles control between the DVD mode and the HDD mode. ^ MENU Accesses media browser or return to previous menu. & PR+/– (…/†) Scans up or down through memorized channels. Also moves up and down in menus.
Identification of Controls INTRODUCTION Front Panel Display DVD MODE HDD MODE HDD/DVD Recorder is recording. Disc is loaded HDD Timer Recording is set DVD Timer Recording is set FRONT DISPLAY MESSAGE:Indicates clock,channel,current mode,OTR time,etc. Channel PR23 Recording on HDD TV Channel Input mode 11:15 Indicates a Timer recording on HDD is set. 11:15 Indicates a Timer Recording on HDD is in standby mode. Au AV input 11:15 Indicates the HDD is recording.
Identification of Controls Remote Control - Turns the HDD/DVD Recorder on and off. - Locks the front panel by pressing and holding it over 5 seconds. Opens and closes the disc tray. Selects DVD mode. HDD DV INPUT Selects HDD mode. Selects DV Input mode. Switches the HDD/DVD Recorder input to RF (Tuner), AV, AVF or S-VIDEO. - Selects numbered options in menus. - Selects TV channels. Clears previous setting of timer-recording or file name. Adds the title in Dubbing or Copying menu.
Identification of Controls INTRODUCTION Starts recording. Press repeatedly to set the recording time. For more details, Refer to One Touch Record (OTR) on page 40. DUB Displays the Dubbing or Copy menu. Selects Recording mode. (Approx.) [DVD] HQ (1hr), SP (2hrs), EP (4hrs), SLP (6hrs) DG-M13E1D [HDD] HQ (16Hrs), SP (33hrs), EP (64hrs), SLP (97hrs) DG-M23E1D HQ (32Hrs), SP (66hrs), EP (128hrs), SLP (195hrs) Displays the Timer Recording menu. Selects a subtitle language, if available.
Identification of Controls Rear panel @ # ! & $ * ! S-VIDEO OUT Connect to a TV with an S-Video Input. @ AUDIO OUT (L, R) Connect to a TV or other equipment with audio inputs. # COMPONENT VIDEO OUT (Y Pb Pr) Connect to a TV with Component Video (Y Pb Pr) inputs. $ AV OUT JACK Connection of a TV set. Composite video output and audio output (L, R). % ANT IN Connect to your antenna or cable TV outlet. Downloaded From Disc-Player.
Connections Connecting a TV Choose one of the following TV connections, depending on the capabilities of your equipment. Rear of TV S-VIDEO INPUT COMPONENT/PROGRESSIVE VIDEO INPUT Pr S Pb ANTENNA INPUT Y C R Connecting Antenna/Cable 1 Disconnect the antenna/cable from the rear of your TV. 2 Connect this cable to the jack marked ANT IN (FROM ANT.) on the rear panel of the HDD/DVD Recorder.
Connections S-Video Connection 1 Connect the S-VIDEO OUT jack on the 1 Connect the HDD/DVD Recorder’s DIGITAL AUDIO OUT jack (Coaxial or Optical) to the corresponding in jack on your amplifier. Use an optional digital coaxial (or optical) audio cable. (X) 2 You will need to activate the HDD/DVD Recorder’s digital output; see ‘Audio’ Settings on page 25. HDD/DVD Recorder to the S-Video in jack on your TV using an S-Video cable (S).
Connections Connecting a Digital Camcorder To receive audio/video signals from other equipment, connect the AVF (Audio/Video Front) jacks on the HDD/DVD Recorder to the audio/video out jacks on your external component, using optional audio/video cables. Using the front panel DV IN jack, it is possible to connect a DV digital camcorder, video deck or DVD+R/RW recorder and digitally transfer DV tapes or DVD+R/RW discs to DVD±R, DVD±RW or HDD in HDD/DVD Recorder.
Initial Installation After successfully connecting your HDD/DVD Recorder to your TV and other devices, this chapter will show you how to complete the initial installation. You must follow the initial installation process to set the time, date, channels, and language preferences for the HDD/DVD Recorder. 1 A ‘Welcome‘ message is displayed on the screen. Make sure the RF cable from your antenna or cable TV jack is connected. Press [ENTER] to begin initial installation.
Setup menu Setup Menu Overview The HDD/DVD Recorder Setup menu includes six categories, including: Installation, Recording Options, Languages, Preferences, System Info, and Restore Defaults. Press [SETUP] and [œ/√] on the remote control to view the first and second levels of the Setup menu. 4 Press [ENTER]. The ‘Manual Setup’ menu appears. 5 Use […/†] to select ‘Standard‘. Press [ENTER] to move to the second level.
Setup menu 9 10 Use […/†] to select ‘Auto Search‘. Search the real channel number by pressing [œ/√]. Manual Setup Standard Reception Auto Search Fine Tune Decoder Store Channel Program Name Instructions: PAL-II Aerial CH-02 N/A PR-01 P-01 Enter-Confirm Setup-Exit Move …† 11 Select ‘Fine Tune’. You can adjust the fine tuning.
Setup menu Auto Set The HDD/DVD Recorder has a frequency synthesized tuner capable of receiving channels that include VHF Low E2~S6, VHF High S7~S36, and UHF S37~E69. Set Clock 1 Follow steps 1-2 as shown under ‘Manual Set’. 2 Use […/†] to select ‘Set Clock‘. Preparation: Installation Connect the HDD/DVD Recorder to the desired type of antenna or cable TV system, as shown in ‘Connecting Antenna/Cable‘ on page 15. 1 2 Follow steps 1-2 as shown under ‘Manual Set’.
Setup menu Adjust Channels 1 Follow steps 1-2 as shown under ‘Manual Set’. 2 Use […/†] to select ‘Adjust Channels‘. 2 Press […/†] to select the PR number you want to move to. 3 Press [ENTER]. The selected PR Will be moved to the new PR number. Delete Installation Manual Set Auto Set Set Clock Adjust Channels After tuning TV stations into your HDD/DVD Recorder, you may wish to delete a station. 1 Use […/†] to select 'Delete' and press [ENTER].
Setup menu LANGUAGE Settings HDD Record Quality You can set the default HDD recording quality to (Approx. time) : [DG-M23E1D, 160GB] HQ (High Quality - 32hrs), SP (Standard Play - 66hrs), EP (Extended Play - 128hrs), or SLP (Super Long Play 195hrs). [DG-M13E1D, 80GB] HQ (16hrs), SP(33hrs), EP (64hrs), or SLP (97hrs) Follow the same procedure as the 'DVD Record Quality'. Recording Options SP SP HDD Select 5Quality min Select a language for the HDD/DVD Recorder Setup menu and on-screen displays.
Setup menu PREFERENCES / Video Settings 1 2 3 4 Press [SETUP]. automatically. Use [œ/√] to select ‘Preferences‘. Video Output While ‘Preferences‘ is selected, press [†] to select ‘Video‘. Progressive Scan Video provides the highest picture quality with reduced flickering. Press [ENTER]. The ‘Video‘ submenu is displayed. Video Audio Parental Controls Auto Settings Hard Disk Follow the same procedure as ‘TV Aspect Ratio’ to change the ‘Video Output’.
Setup menu PREFERENCES / Audio Settings Follow the same procedure as ‘Video’ Settings to select ‘Audio’ Settings. Video Audio Parental Controls Auto Settings Hard Disk N/A Instructions: Enter-Confirm Setup-Exit Move …† ‘Audio’ submenu is displayed. Press [ENTER] or [√] to go to the second level. While watching DVD movies, you may wish to compress the dynamic range of the audio output (the difference between the loudest and quietest passages).
Setup menu PREFERENCES / Parental Controls The initial password is ‘0000‘. You must enter this password before you can change the Parental Level. Set Parental Level The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. You can set the parental level from ‘Adult’ to ‘Kid safe’. 1 2 3 Press [SETUP]. Use [œ/√] to select ‘Preferences‘.
Setup menu Change Password 1 While ‘Preferences‘ is selected, press [†] to Parental Country Code 1 While ‘Preferences‘ is selected, press [†] to select ‘Parental Controls‘. Then press [†] to select ‘Parental Country Code‘. select ‘Parental Controls‘. 2 Press [ENTER]. The ‘Parental Controls‘ submenu appears. 3 Use […/†] to select ‘Change Password‘ then press [ENTER].
Setup menu Set Hdd Parental Lock It allows you to prevent from being played the title parental locked in HDD video menu. You can set the HDD parental lock as follow. 1 While ‘Preferences‘ is selected, press [†] to select ‘Parental Controls‘. And press [ENTER]. 2 Use […/†] to select ‘Set Hdd Parental Lock’ and press [ENTER]. The Password Input dialog will appear. Enter a 4-digit password using the [0-9] buttons.
Setup menu Buffer Mode 1 Use […/†] to select ‘Buffer Mode‘ while the ‘HardDisk’ submenu is displayed. Press [ENTER] or [√] to go to the second level. HDD Preferences Auto Title Delete Buffering Mode Jump To Interval Reset Hard Disk On Preserve Select Buffering 5 Mode Min Reset HardDisk This feature enables you to erase the entire content of the HDD. Please proceed with caution, as this process is irreversible. 1 Use […/†] to select ‘Reset Hard Disk’ while the ‘HardDisk’ submenu is displayed.
Setup menu System Information Restore Defaults System Information helps service personnel identify key firmware information about your HDD/DVD Recorder in case service is required. If you wish, you can reset the HDD/DVD Recorder to its original factory settings. 1 2 System Info Press [SETUP]. Use [œ/√] to select ‘Restore Defaults‘. Restore Defaults System Version DivX VOD If you select this function all settings will be removed and the product will be set into initial (factory) mode.
On-Screen Display Overview The On-Screen Display provides feedback on the status of the HDD/DVD Recorder and/or the currently loaded disc or HDD. To access the OnScreen Display (or OSD), press [DISPLAY]. 3 Use […†] to change the numbers. Press [ENTER] to confirm. Chapter Shows the current chapter number and total number of chapters, and skips to the desired chapter number. Displaying Disc Information 1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
On-Screen Display Overview Elapsed Shows the elapsed playing time, and skips to the desired time. 1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen. 2 Use […†] to select the ‘Elapsed’ icon on the onscreen display. Press [ENTER] to search by time. The submenu appears. Changing the TV Audio Channel You can change the TV audio using the [AUDIO] button. Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
DVD Playback Playing a DVD 1 Still Picture and Frame-by-Frame Playback 1 Press [PLAY/PAUSE] during playback. The Press [DVD] to set the remote control to operate the DVD. HDD/DVD Recorder will go into Still mode. DVD Selected Turn the TV on and select the video input source connected to the HDD/DVD Recorder. Actions are now for DVD Audio system: Turn the audio ■ Stop system on and select the input source connected to the HDD/DVD Recorder. 2 Press [OPEN/CLOSE] to open the disc tray.
DVD Playback Selecting Titles • The Zoom function may not work on some DVDs (ex. Jpg..) • The Zoom function does not work in PAUSE mode. When a disc has more than one title, you can select among all available titles as follows: 1 Repeat 1 To repeat the currently playing chapter, press [REPEAT]. ‘REPEAT CHAPTER’ appears on the TV screen. Selecting Chapters 2 To repeat the currently playing title, press [REPEAT] twice. ‘REPEAT TITLE’ appears on the TV screen.
Playing a Picture, Music or DivX files DivX Playback (HDD Media, DVD) The HDD/DVD Recorder can play DivX files on a disc such as CD-R/RW, DVD+R/RW, DVD-R/RW, or on HDD Media. 1 Prior to playing Divx files on disc, insert disc and close the tray. 2 Press [MENU] to bring up the Media Browser and select the media (HDD Media, DVD) you want to play.
Playing a Picture, Music or DivX files Audio CD Playback The HDD/DVD Recorder can play audio CDs on CDR/RW, DVD+R/RW, DVD-R/RW. 1 2 DVD Music Item : MP3 Tr : 10/204 Insert the disc and close the tray. In case an audio CD is already loaded, press [MENU] and select the DVD browser using […†], then press [ENTER]. ■ STOP Normal The CD Music folder tree appears. Use […†] to select a track or a file, then press [ENTER] twice or just [PLAY]. 01 INTRO.MP3 01 SHE’S MINE.MP3 01 --,--- --- --.
Playing a Picture, Music or DivX files Playing MP3 Files During a Slide Show You can enjoy a slide show while listening to MP3 music files. DVD Pictures Item : JPG Pic : 2/143 .. / IMG_0248.JPG IMG_0250.JPG IMG_0261.JPG IMG_0268.JPG IMG_0266.JPG IMG_0277.JPG IMG_0282.JPG 24 Items Move-…†œ √ Edit-EDIT 6 2/24 …† Copy-DUB Exit-SETUP The full size image will be displayed and a slide show starts automatically with a time interval of 10 seconds.
Time shifting & Saving Time shifting in HDD mode When the HDD/DVD Recorder is turned on or you press the [HDD] button on the remote control or the [DVD/HDD] button on the front panel to move to HDD mode from other menus, the last viewed TV channel will be tuned in and Time shifting starts automatically. Time shifting allows ‘pausing’ the live TV broadcast for up to 60 minutes. At any time, the viewing can resume. Press [PLAY/PAUSE] to pause the broadcast, press [PLAY/PAUSE] agian to resume TV viewing.
Time shifting & Saving Saving to HDD Save While viewing a program, press [REC]. This will start saving the segment you are watching. You can navigate forward. During the saving operation, by pressing [REC], you will increase the length of the program you are saving by 15 minutes up to a maximum of 10 hours. Press [STOP] to indicate the end of the saving operation. In case of recording a part of Time shifting buffer, the buffer will be empty.
Basic Recording Recording to DVD or HDD If you press [DVD] or [HDD], you will be in DVD or HDD mode. You can start recording to DVD or HDD by pressing the [REC] button. (In the case of a DVD, it must be a recordable media in the tray.) 1 Turn on the HDD/DVD Recorder and load a recordable disc . Make sure your TV input is set to view the HDD/DVD Recorder. Select the media to record by pressing [DVD] , [HDD], or [DVD/HDD] on the front panel.
Timer Recording To Pause the Recording 1 Press [PLAY/PAUSE] to pause the disc during recording. 2 To continue recording in DVD mode, press [PLAY/PAUSE] or [REC (●)]. • To quit One Touch Recording, press and hold [STOP] for 5 seconds. • The HDD/DVD Recorder will automatically power off when One Touch Recording ends. • You cannot record on the HDD and DVD at the same time. • Pressing [PLAY/PAUSE] during HDD recording does not act as record pause but time shifting still.
Timer Recording Canceling a Timer Recording Edit Timer Media PR No. Date Start End Mode Repeat Delete Instructions: PR-03 Jan/02 Sun 13:30 14:30 HQ Once Enter-Save Setup-Exit 4 Press [ENTER] to save the program. The Timer Record List will appear. Timer Recording PR No. Date Start PR-03 01/02 13:30 ---- --/-- --:----- --/-- --:-- End Mode 14:30 HQ --:-- ----:-- --- 5 Press [SETUP] to exit the Timer Record List. 6 Timer indicator will light or start blinking.
Recording from an External Input Recording from External Components You can record from an external component, such as a camcorder, VCR or Digital Camera, connected to any of the HDD/DVD Recorder’s external inputs. 1 Make sure the component you want to record from is connected properly to the HDD/DVD Recorder; see pages 15~17. 2 Use [PR+/–] or [INPUT] to select the external input 3 to record from. Load a recordable disc if you are recording onto a DVD. And then select HDD or DVD to record.
Dubbing Dubbing will copy the selected titles (+VR format) with the same properties (title name, duration, index picture, chapter mark) in HDD Videos to DVD or vice versa. The Media BROWSER can not be activated in the middle of dubbing, that means play, stop, any edits does not work. Dubbing from HDD to DVD 1 Prior to selecting titles for dubbing, you need to HDD to DVD Dubbing Add Start Dubbing Dub : 0 Titles 1. Title PR-01 ---2. Title PR-02 ---3. Title PR-03 ---4. Title PR-04 ---5. Title PR-05 ---6.
Media files Copying Dubbing from DVD to HDD 1 Prior to selecting titles for dubbing, you need to insert a disc to be dubbed into the tray. Press [DUB], then 'Media Dubbing' appears. 2 3 Select 'DVD to HDD'' using […†] and press [ENTER]. 4 Select the title you want to dub using […†] and press [ENTER] to add. Then select more titles using […†] and press [ADD]. Repeating the same process, you can add many titles. 5 If you select all the titles you want to dub, select ‘Start Dubbing’ using […†].
Media files Copying 2 If you want to edit a folder including copy, select the folder you want to edit using […†] and press [EDIT]. - Create Folder : Create folder where you want - Delete Folder - Copy Folder : Copy folders including all files in the folder. - Rename Folder HDD Music Create Folder Delete Folder Copy Folder Rename Folder DVIX/ 1/ MU/ 02_LIVIN ON PRAYER.MP3 Select the title you want to copy using […†]. Then select 'Edit‘ using […†] and press [ENTER].
HDD Playback and Editing This section explains various functions of HDD editing. At first, go to ‘HDD Videos’ mode. 1 Press [HDD] to select HDD Or press [PLAY/PAUSE] to play the title. 6 To stop playback at any time, press [STOP]. Then it will return to media browser. 7 To leave the media browser mode, press [SETUP]. mode.
HDD Playback and Editing Editing a HDD title Renaming (Labeling) a Title Follow these instructions to rename a title list name,i.e., to edit the title of a recorded program. 4 5 6 7 8 9 Select the title to be labeled using [ENTER]. Select ‘Edit’ using [… †] . Press [ENTER] to go to submenu. Select ‘Name’ using [… †] . 5 6 7 8 9 10 11 Press [ENTER] to change the title name.
HDD Playback and Editing HDD Videos Name 1. Title PR-01 ---Parental LockHDD2.Videos Title PR-02 ---Delete protect Title PR-031.---Date 3. : 22/06/05 Title PR-01 ---Video Edit Time4.: 11/16 Title PR-042.---Title PR-02 ---5. :Title PR-053.---Length 00:13 Title PR-03 ---6. Title Quality : HQ PR-064.---Title PR-04 ---7. Title PR-065.---Title PR-05 ---8. Title PR-066.---Title PR-06 ---9. Title PR-067.---Title PR-06 ---10. Title PR-06 ---- PR-06 ---8. Title Title…† PR-06 ---Free Space : 99% 13 Titles 9.1/13 10.
HDD Playback and Editing Sorting a HDD title Dubbing a HDD title to DVD disc Follow these instructions to sort a title from the Title List by varying the order. Follow these instructions to copy the title(s) selected with the same properties (title name, duration, index picture, Lock, Chapter Mark) information over to DVD. 4 5 6 7 8 Select the title to be sorted using [ENTER]. Then select ‘Sort‘ using [… †]. Press [ENTER] to go to submenu. Select ‘Record Date’ using [… †] .
Disc Manager This section explains edit functions for the entire disc and for the titles in the disc. At first, go to ‘Disc Menu’ mode. 1 Press [MENU] to go to ‘Disc Menu’ menu. 2 If you want to display ‘Title Edit’ menu, press [√] in ‘Disc Menu’ menu. Go to ‘Title Editing’ on page 54~55. 3 If you want to display ‘Disc’ top menu, press […] in ‘Disc Menu’ menu. The Disc top Menu shows you disc information, such as disc type, number of recordings, total titles, free space, etc.
Disc Manager Make Compatible Erase the disc Press [Enter] if you want to erase the disc. All the disc Erase existing recordings will Erase the disc? be cleared. All recordings will be lost. Yes No 'Make Compatible' for a DVD+RW will automatically create a menu screen for navigating the disc. This menu screen is accessible by pressing [TITLE]. 4 Use [œ/√] to select ‘Make Compatible‘ for DVD+RW. Press [ENTER] as shown on the screen. 5 Select 'Yes' using […] and press [ENTER] to make the disc compatible.
Disc Manager Disc Editing in DVD±R, DVD-RW disc Change Disc Name You can rename your disc to any name you choose. The default disc name is ‘MY DVD‘. 4 Use [œ/√] to select ‘Change Disc Name‘. Press [ENTER] as shown on the screen. 5 6 The Keyboard Menu appears. Finalising a DVD±R (or DVD-RW) ‘locks’ its recordings in place so the disc can be played on most standard DVD players or computers equipped with DVD-ROM drives. 4 Use [œ/√] to select ‘Finalise Disc‘ for a DVD±R (or DVD-RW).
Disc Manager Title Editing You can manage the titles on your DVD±R/±RW discs using the Title menu. At first, go to ‘Title Edit’ mode. 1 2 Press [MENU] to go to ‘Disc Menu’ menu. 3 Press [√]. ‘Title Edit’ menu will be displayed. Select the desired title you want to manage using […†]. Change Name To change the name of a title: 4 5 6 4 5 7 Select ‘Play Title' using [œ √] . Press [ENTER] to change the title name. The Keyboard Menu will be displayed.
Disc Manager Advanced Disc Editing Record Option To set DVD±R and DVD±RW recording options: 4 Select ‘Record Options’ using [œ √] and press [ENTER]. 5 Select your preferred record options for each disc type: For DVD±R The last recorded title : Allows you to append your new recording to the end of your last recording, or record it as a new title. Others : Allows you to record your new title until the end of the disc.
Disc Manager desired chapter number and then press [ENTER]. Edit Chapters You can add a chapter marker anywhere in a title during playback. Once the chapter is marked, you can use the chapter search feature as described above. You can add/delete chapter markers or delete all chapter markers in a title. 1 Use […†] to select ‘Edit Chapters‘. 2 Press [ENTER] to display the submenu. 3 Use […†] to select one of the various chapter marker functions (Add, Delete, or Delete All).
Troubleshooting Check the following guide for the possible cause of a problem before contacting customer support. Symptom No power. Cause Solution The power cord is disconnected. REFERENCE 57 EDITING Plug the power cord into the wall outlet securely. The TV is not set to receive HDD/DVD Select the appropriate video input on the No picture. Recorder signal output. TV so the picture from the HDD/DVD Recorder appears on the TV screen. The video cable is not connected Connect the video cable securely.
Troubleshooting Symptom Cannot record or did not record successfully. Timer Recording not possible. Stereo Audio Record and/or Playback not present. Remote control does not work properly. Cause Solution The remaining blank space on the disc is insufficient. The source you are trying to record is copy-protected. When setting the recording channel, the channel is tuned on your TV’s tuner. Clock in HDD/DVD Recorder is not set to correct time. Timer has been programmed incorrectly.
Technical Specifications General DVD Specifications Power requirements 200–240V~, 50/60 Hz Power consumption 40W Dimensions(approx.) 435 x 55 x 343 mm (w x h x d) Mass (approx.) Net : 4.3kg Gross : 5.6kg Operating temperature 41°F to 95°F (5°C to 35°C) Operating humidity 5% to 90% Signal system PAL Colour Frequency response Recording Recording formats Recordable discs Recordable time DVD Video Recording, DVDVIDEO DVD±R, DVD±RW [DVD] (Approx.
