Service manual

-8-
ALIGNMENT INSTRUCTIONS
Follow the steps below whenever service adjustment is required.
1) How to enter the service mode using the user remote control
-. Turn the set on.
-. Direct the remote control to the reception window of TV.
-. Push buttons of remote control in sequence as follows.
1 ——> MUTE ——> DISPLAY ——> MUTE
-. Then, the screen will appear as follows.
S2 SCRN
S5 IFC
S6 GEO
S8 W/B
S9 DP
S12 FACT
S7 PTRN
-. Using the channel up or down button, select the item you wish to adjust.
(The color of selected item turns into the red.)
-. Press “ “ button to enter in the service mode you wish to adjust.”
2) How to memorize the adjusted values in the service mode.
-. Must press DISPLAY button the state which the screen is displaying each of
menusafter all adjustments are completed each of all service menu.
4-2. SERVICE MODE ADJUSTMENTS