Instruction manual B AND Y/ON ST Thank you for purchasing the Digital Home Cinema System. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your Digital Home Cinema System. Please retain this manual for future reference.
Instruction manual Thank you for purchasing the Digital Home Cinema System. Please read this manual thoroughly before making connections and turning on the power. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your Digital Home Cinema System. Please retain this manual for future reference.
Important Safeguards Important Safeguards WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Precautions 1. Warranty Claim You can find the serial number on the rear panel of this unit. In case of warranty claim, please report this number. 2. Recording Copyright Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder. 3. AC Fuse The fuse is located inside the chassis and is not userserviceable. If power does not come on, contact your authorized service center. 4.
Features Index to Parts and Controls Front panel A/V Digital Receiver Features DVD/VIDEO CD/MP3 CD/Audio CD/ JPEG File Player Features Video CD and CD Disc Playback Capability JPEG File Playback Capability Digital Audio Output for MD or CD Recording On-screen Display (DVD function only) 10-Bit Video D/A Conversion 3-Mode “Zoom-In” Function (Off, x1.
Index to Parts and Controls Index to Parts and Controls Remote controller Display 2 3 4 6 5 7 8 9 10 11 12 13 ENTER 14 15 16 17 15 18 20 21 19 22 4 8 5 23 24 25 26 29 30 33 34 37 38 27 28 31 32 35 36 39 40 Getting Started 1 1. STANDBY/ON button 2. OPEN/CLOSE button 3. MUTE button 4. INPUT SELECTOR: TV/AUX button 5. INPUT SELECTOR: DVD button/ TV SYSTEM(PAL/NTSC: DVD only) button 6. INPUT SELECTOR: VIDEO button 7. INPUT SELECTOR: TUNER button 8. FAST REVERSE(FR) ( ) button 9.
Preparing the Remote Controller Inserting the Batteries Notes on Discs This section shows you how to handle, clean, and store discs. Notes Do not mix new batteries with old batteries or different kinds of batteries. To avoid corrosion, remove the batteries if the remote controller is not to be used for a long time. Remove dead batteries immediately to avoid damage from corrosion. If the remote controller does not operate smoothly, replace both the batteries at the same time.
Connecting to Audio/Video Equipment Connecting to a TV machine to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected. Automatically switched to the TV set A/V mode(DVD, Video) Do not change to Video Aspect Ratio. Note that only video cable for monitor output is supplied. Before connecting Refer also to the instruction manual of each component to be connected.
Connecting Speakers Making Antenna Connections To prevent damage to circuits, never shortcircuit the positive (+) and negative (-) speaker wires. Connecting the Supplied Antennas Getting Started Before connecting This machine is designed to reproduce optimum sound quality when speakers with the specified impedance below are connected.Please check the following information and choose speakers with appropriate impedance for the connections.
Connecting the Power/Turning on the machine Before connecting Before operating your machine, you need to set up the speaker configuration and the delay time from the listening position to each speaker. Note It is not necessary to set the parameters again once you have completed the setup unless you change the speaker configuration. 1. Press SPK SETUP to display the Front, Center, Rear speaker and Subwoofer configuration. The front, center, rear speaker and subwoofer configuration appears on the TV screen.
Playing DVD Videos / VIDEO CDs / MP3 CDs / Audio CDs Playing DVD Videos / VIDEO CDs / MP3 CDs / Audio CDs If a sound selection menu appears on the TV screen See “Enjoying the Sound Effects” for details of the sound systems. Select the appropriate sound using , then press ENTER. For example, if you need to select either “DTS” or “Stereo”, select “DTS” since the machine is able to reproduce DTS (Digital Theater System) Surround sound. This section shows you the basics on how to play discs.
Playing DVD Videos / VIDEO CDs / MP3 CDs / Audio CDs Fast Searching Notes Notes Press (Fast Reverse) or (Fast Forward) during playback or pause. The playback speed becomes two times the normal speed. Each press of or changes the playback speed as follows: FF 2X FF 4X FF 8X FF 16X 16 FF 1X FF 2X FF 3X FF 32X 32 FF 4X FF 64X FF 128X 64 128 PLAY FF 2X The instructions above describe basic procedures which may vary depending on the contents of the DVD video.
Locating a Specific Title/Chapter/Track/MP3 File/Location Radio Listening There are two ways to select radio stations: one is manual tuning and the other is presetting radio stations then selecting the preset channels. Locating a specific track directly Locating a specific title You can locate the desired track by entering the number. 1. Press GO TO to select TITLE. 2. Press want. to find the TITLE what you 3. Press the number button(s) to enter the chapter number for the desired chapter.
Receiving FM stations with RDS(Europe only) Various Functions Common to all the Sources RDS(Radio Data System) is a broadcasting service which a growing number of FM stations are now providing. It allows the FM stations to send additional signals along with their regular program signals. For example, the stations send their station names and informations about what type of program they broadcast, such as sports or music, etc.
Playing Repeatedly Enjoying the Sound Effects The surround sound of the machine lets you enjoy the presence of a movie theater or concert hall in your room. Before using any sound effect, make sure the Speaker Setup configurations have been set correctly. The speaker configuration is very important for the surround sound. See “Connecting Speakers” and “Positioning Speakers”. Following are the sound systems the machine can reproduce.
Playing in Random Order You can play titles, chapters within a title, or tracks in random order (SHUFFLE playback). Playing Chapters or Tracks in Random Order The machine automatically selects the chapters in a DVD video, or tracks in a VIDEO CD/audio CD, and plays them randomly. Zooming a Picture You can zoom in on a picture. You can also shift the zoom point. Zooming a Picture and Shifting the Zoom Point 1. Press ZOOM during normal or still playback.
Selecting Subtitles Included on the DVD Selecting the Digest This function helps speedy search to the desired track by displaying 9 different small screens per page showing information regarding the tracks recorded on the disc. 1. Press STOP button Press the STOP button for normal VCD or PBC button for CVD, SVCD and VCD 2.0 with PBC to stop playing because this function is valid only for the STOP state. 3. When you choose INTRO All the tracks on the disc are played for 10 seconds if no key is pressed.
Selecting the Audio Language/Sound Included on the Disc Selecting the Audio Language/Sound Included on the Disc You can view information about a disc and its operational status on the TV screen. Checking the Total Number of the Titles/Tracks, Current Title/Chapter/Track, Remaining and Elapsed Time, etc. You can select a preferred audio language and sound system. Press DISPLAY while the disc is stopped or playback. Each time you press DISPLAY, the on-screen display on the TV screen changes as follows.
Customizing the Function Settings PARENTAL LOCK (DVD only) When you insert a DVD Video, VIDEO CD, the various functions of the machine will be set (reset) according to the setting menu. You can customize this setting menu according to your preference. This function is to disable the playing of specified DVD that are unsuitable for children. As each disc has slightly different codes, please refer to the disc instruction. There are 8 levels.
Customizing the Function Settings Customizing the Function Settings Once the initial settings have been completed, the player can always be operated under the same conditions whenever the power is switched on. These settings are called SETUP data that are easily modified and stored using the SETUP menu. The SETUP menu includes the information for AUDIO and other system controls. SETUP MENU TV DISPLAY NORMAL/PS NORMAL/LB WIDE Set up TV aspect according to your TV set.
Troubleshooting Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective instruction manuals of the connected components and TV. Symptoms The machine doesn’t switch on. Causes • The power cord is disconnected. Symptoms Remedies Too much noise is heard or sound is • FM stereo waves may produce a hiss noise interrupted occasionally. (“STEREO” when a certain level is reached. indicator does not light steadily.
To Add the Active Subwoofer System(User optional) Specifications General specifications SUBwoofer SPEAKER PLACEMENT Power consumption Power supply Voltage ( Option ) Standby Operating AC 110V or 120V or 127V or 220V or 230V or 240V (50/60Hz) 2Watt 90Watt Dimensions (W x D x H) / Weight 360 x 380 x 70mm/ 6.0 kg Front Amp. Section POWER OUTPUT at 10% THD(DIN) THD(TOTAL HARMONIC DISTORTION) INPUT SEN.