Operating instructions

Getting started
VQT4W66
19
1 Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2 Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3 Follow the on-screen instructions and
perform the settings.
• When the Download from TV screen
appears, the setting information on the TV
is acquired by this unit. (> 73)
Auto Setup starts.
(This operation may take some time.)
e.g.,
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (> 91, Clock).
4 Set “Quick Start” to “On”, “Off” or “Timer
Setting for Quick Start”, then press [OK].
•On
It is possible to start quickly from standby
mode.
•Off
Power consumption in standby mode is
minimized. (> 108)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start
“Quick Start” is activated when the set time
comes. (If the clock has not been set, this
function is not activated at all hours.)
Easy Setting
Progress
Digital TV Auto Tuning
CH 6 69
RF Ch
Digital TV: 2
Searching
Quality
Type
Channel Name
RETURN
This will take about 3 minutes.
35
10
10
35
Digital TV
Digital TV
Quick Start
On
Off
Timer Setting for Quick Start 6:00 AM 11:00 PM
DMRBWT835GL_eng.book 19 ページ ２０１３年２月１日 金曜日 午前９時５５分